It is always present. It was documented as mandatory prior to
commit 90aeca875f ("dt-bindings: display: Convert etnaviv to
json-schema").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
There might be good reasons why the getting a clock failed. To treat the
clocks as optional we're specifically only interested in ignoring -ENOENT,
and devm_clk_get_optional() does just that.
Note that this preserves the original behavior of all clocks being
optional. The binding document mandates the "bus" clock while the dove
machine only specifies "core".
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Since commit 65f037e8e9 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.
Fixes: 65f037e8e9 ("drm/etnaviv: add support for slave interface clock")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Set LED_CORE_SUSPENDRESUME to LED cdev flags, so that the LED core
would store and restore the LED status at suspend/resume.
In theory, the codec driver should be responsible for all LED bits,
but this might be safer and cover the overlooked cases.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both mute and mic-mute LED callbacks do almost similar tasks with just
different bits. Factor out the common code and use them from the
callbacks for simplification.
This ended up with covering the forgotten stuff, too; e.g. VREF LED
handling required the temporary power up/down that was missing for the
mute LED, or some forgotten polarity checks are added.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the mute LED handling in Sigmatel/IDT codec to the new vmaster
mute helper. A point to be cautiously handled is that the value
passed to the callback is inverted; the vmaster passes "enabled"
(0 = mute), while LED classdev passes "brightness" (1 = mute).
A positive side-effect by this change is that the driver gets also the
enum controls for the mute behavior like other drivers already had.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the mute LED handling in Conexant codec to the new vmaster
mute helper. A point to be cautiously handled is that the value
passed to the callback is inverted; the vmaster passes "enabled"
(0 = mute), while LED classdev passes "brightness" (1 = mute).
Also the assignment of the default vmaster hook is moved at a later
point after the mute hook is set up. This assures no nested hook.
Finally, since we enable the mute-LED kcontrols always in the helper
side, the extra vmaster_mute_enum flag set up is dropped.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the mute LED handling in Realtek codec to the new vmaster mute
helper. A point to be cautiously handled is that the value passed to
the callback is inverted; the vmaster passes "enabled" (0 = mute),
while LED classdev passes "brightness" (1 = mute).
The code in Thinkpad helper is also converted. In that case, just
call the new function and remove the open-code.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like mic-mute LED handling, add a new helper to deal with the master
mute LED with LED classdev. Unlike the mic-mute case, the playback
master mute is hooked on vmaster, and we suppose no nested hooks
allowed there.
The classdev creation code is factored out to a common function that
is called from both mute and mic-mute LED helpers.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the remaining user of
snd_hda_gen_add_micmute_led() in Realtek codec driver into the new
snd_hda_gen_add_micmute_led_cdev().
The Thinkpad helper code is updated accordingly, too.
Also, the usage of snd_hda_gen_fixup_micmute_led() is replaced with
either the local alc_fixup_micmute_led() or the explicit call of
snd_hda_gen_add_micmute_led_cdev() with NULL callback.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new helper, snd_hda_gen_add_micmute_led_cdev(), is introduced here
for creating a LED classdev and setting up the hook to the capture
control for controlling the mic-mute LED to follow the capture switch
change. This will replace the existing users of
snd_hda_gen_add_micmute_led() in later patches.
Also, introduce a new kconfig CONFIG_SND_HDA_GENERIC_LEDS, to indicate
the usage of mute / mic-mute LED helpers. It's selected by the codec
drivers (Realtek, Conexant and Sigmatel), while it selects the
necessary LED class dependencies.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of adding a special hook to trigger the mic-mute LED device,
call it always from the common callback function. It won't hurt even
if no corresponding led cdev is present.
This is basically a preliminary change for the later patches to
convert the all mic-mute LED handling to LED class cdev.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200618110842.27238-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The idle tasks created for each secondary CPU already have a random stack
canary generated by fork(). Copy the canary to the percpu variable before
starting the secondary CPU which removes the need to call
boot_init_stack_canary().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200617225624.799335-1-brgerst@gmail.com
This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
boards.
It has multiple boot control features like password check, power-on
options, power-off control and system FAN control on recent boards.
This implements a very basic MFD driver with the fan control and User
NVMEM cells.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
boards.
It has multiple boot control features like password check, power-on
options, power-off control and system FAN control on recent boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add a 16-bit pre-scaled voltage mode to ADC and clarify that existing
pre-scaled mode is 24bit.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The mfd_cell structures inconsistently use commas on single entries in
the table, make this consistent by always using a comma. Also remove an
extra blank line.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This forward declaration is redundant since the header including the
full data structure is included.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Whilst it doesn't matter if the internal 32k clock register settings
are cleaned up on exit, as the part will be turned off losing any
settings, hence the driver hasn't historially bothered. The external
clock should however be cleaned up, as it could cause clocks to be
left on, and will at best generate a warning on unbind.
Add clean up on both the probe error path and unbind for the 32k
clock.
Fixes: cdd8da8cc6 ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
BUG_ON macros are generally frowned upon when the issue isn't super
critical, the kernel can certainly carry on with the 32k clock on the
CODEC in a bad state so change the BUG_ON to a WARN_ON.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Intel Emmitsburg PCH has the same LPSS than Intel Ice Lake.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Implement clock event driver using low power STM32 timers.
Low power timer counters running even when CPUs are stopped.
It could be used as clock event broadcaster to wake up CPUs but not like
a clocksource because each it rise an interrupt the counter restart from 0.
Low power timers have a 16 bits counter and a prescaler which allow to
divide the clock per power of 2 to up 128 to target a 32KHz rate.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Because stm32-lptimer need to write in registers in interrupt context
enable regmap fast_io to use a spin_lock to protect registers access
rather than a mutex.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add defines to be able to enable/clear irq and configure one shot mode.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The command status reply is only for failure. When completing set system
config command, the reply has to be command complete.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If user decides to cancel the ongoing pairing process (e.g. by clicking
the cancel button on pairing/passkey window), abort any ongoing pairing
and then terminate the link if it was created because of the pair
device action.
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This calls hci_update_background_scan() when there is any update on the
advertisement monitors. If there is at least one advertisement monitor,
the filtering policy of scan parameters should be 0x00. This also reports
device found mgmt events if there is at least one monitor.
The following cases were tested with btmgmt advmon-* commands.
(1) add a ADV monitor and observe that the passive scanning is
triggered.
(2) remove the last ADV monitor and observe that the passive scanning is
terminated.
(3) with a LE peripheral paired, repeat (1) and observe the passive
scanning continues.
(4) with a LE peripheral paired, repeat (2) and observe the passive
scanning continues.
(5) with a ADV monitor, suspend/resume the host and observe the passive
scanning continues.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This notifies management sockets on MGMT_EV_ADV_MONITOR_REMOVED event.
The following test was performed.
- Start two btmgmt consoles, issue a btmgmt advmon-remove command on one
console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This notifies management sockets on MGMT_EV_ADV_MONITOR_ADDED event.
The following test was performed.
- Start two btmgmt consoles, issue a btmgmt advmon-add command on one
console and observe a MGMT_EV_ADV_MONITOR_ADDED event on the other
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command.
Note that the controller-based monitoring is not yet in place. This
removes the internal monitor(s) without sending HCI traffic, so the
request returns immediately.
The following test was performed.
- Issue btmgmt advmon-remove with valid and invalid handles.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command.
Note that the controller-based monitoring is not yet in place. This tracks
the content of the monitor without sending HCI traffic, so the request
returns immediately.
The following manual test was performed.
- Issue btmgmt advmon-add with valid and invalid inputs.
- Issue btmgmt advmon-add more the allowed number of monitors.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES
command. Since the controller-based monitoring is not yet in place, this
report only the supported features but not the enabled features.
The following test was performed.
- Issuing btmgmt advmon-features.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the wakeable boolean with flags in hci_conn_params and all users
of this boolean. This will be used by the get/set device flags mgmt op.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the required read/set commands for runtime configuration. Even
while currently no parameters are specified, the commands are made
available.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Fixes: 57f4959bad ("arm64: kernel: Add support for User Access Override")
Reported-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
