This patch improves the handling of the SGMII interface on the QCA8K
devices. Previously the driver did no configuration of the port, even if
it was selected. We now configure it up in the appropriate
PHY/MAC/Base-X mode depending on what phylink tells us we are connected
to and ensure it is enabled.
Tested with a device where the CPU connection is RGMII (i.e. the common
current use case) + one where the CPU connection is SGMII. I don't have
any devices where the SGMII interface is brought out to something other
than the CPU.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the driver to use the new PHYLINK callbacks, removing the
legacy adjust_link callback.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarod Wilson says:
====================
bonding: initial support for hardware crypto offload
This is an initial functional implementation for doing pass-through of
hardware encryption from bonding device to capable slaves, in active-backup
bond setups. This was developed and tested using ixgbe-driven Intel x520
interfaces with libreswan and a transport mode connection, primarily using
netperf, with assorted connection failures forced during transmission. The
failover works quite well in my testing, and overall performance is right
on par with offload when running on a bare interface, no bond involved.
Caveats: this is ONLY enabled for active-backup, because I'm not sure
how one would manage multiple offload handles for different devices all
running at the same time in the same xfrm, and it relies on some minor
changes to both the xfrm code and slave device driver code to get things
to behave, and I don't have immediate access to any other hardware that
could function similarly, but the NIC driver changes are minimal and
straight-forward enough that I've included what I think ought to be
enough for mlx5 devices too.
v2: reordered patches, switched (back) to using CONFIG_XFRM_OFFLOAD
to wrap the code additions and wrapped overlooked additions.
v3: rebase w/net-next open, add proper cc list to cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, this support is limited to active-backup mode, as I'm not sure
about the feasilibity of mapping an xfrm_state's offload handle to
multiple hardware devices simultaneously, and we rely on being able to
pass some hints to both the xfrm and NIC driver about whether or not
they're operating on a slave device.
I've tested this atop an Intel x520 device (ixgbe) using libreswan in
transport mode, succesfully achieving ~4.3Gbps throughput with netperf
(more or less identical to throughput on a bare NIC in this system),
as well as successful failover and recovery mid-netperf.
v2: just use CONFIG_XFRM_OFFLOAD for wrapping, isolate more code with it
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit says:
====================
devlink: Support get,set mac address of a port function
Currently, ip link set dev <pfndev> vf <vf_num> <param> <value> has
below few limitations.
1. Command is limited to set VF parameters only.
It cannot set the default MAC address for the PCI PF.
2. It can be set only on system where PCI SR-IOV capability exists.
In smartnic based system, eswitch of a NIC resides on a different
embedded cpu which has the VF and PF representors for the SR-IOV
functions of a host system in which this smartnic is plugged-in.
3. It cannot setup the function attributes of sub-function described
in detail in comprehensive RFC [1] and [2].
This series covers the first small part to let user query and set MAC
address (hardware address) of a PCI PF/VF which is represented by
devlink port pcipf, pcivf port flavours respectively.
Whenever a devlink port manages a function connected to a devlink port,
it allows to query and set its hardware address.
Driver implements necessary get/set callback functions if it supports
port function for a given port type.
Patch summary:
Patch-1 Prepares devlink port fill routines for extack
Patch-2 and 3 extended devlink interface to get/set port function
attributes, mainly hardware address to start with.
Patch-2 Extended port dump command to query port function hardware
address
Patch-3 Introduces a command to set the hardware address of a port
function
Patch-4 to 9 refactors and implement devlink callbacks in mlx5_core
driver.
Patch-4 Constify the mac address pointer in set routines
Patch-5 Introduces eswich check helper to use in devlink facing
callbacks
Patch-6 Moves port index, port number conversion routine to eswitch
header file
Patch-7 Implements port function query devlink callback
Patch-8 Refactors mac address setting routine to uniformly use
state_lock
Patch-9 Implements port function set devlink callback
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor mac address setting function to let caller hold the necessary
state_lock mutex, so that subsequent patch and use this helper routine.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To use port number to port index conversion at eswitch level, move it to
eswitch header.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an helper routine to get esw from a devlink device and use it
at eswitch callbacks and in subsequent patch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since none of the functions need to modify the input mac address,
constify them.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCI PF and VF devlink port can manage the function represented by a
devlink port.
Allow users to set port function's hardware address.
Example of a PCI VF port which supports a port function:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00
$ devlink port function set pci/0000:06:00.0/2 hw_addr 00:11:22:33:44:55
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:11:22:33:44:55
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCI PF and VF devlink port can manage the function represented by
a devlink port.
Enable users to query port function's hardware address.
Example of a PCI VF port which supports a port function:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:11:22:33:44:66
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "enp6s0pf0vf1",
"flavour": "pcivf",
"pfnum": 0,
"vfnum": 1,
"function": {
"hw_addr": "00:11:22:33:44:66"
}
}
}
}
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare devlink port related functions to optionally fill up
the extack information which will be used in subsequent patch by port
function attribute(s).
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes: c5f983f6e8 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a bunch of getter for various aspects of BPF map. Some of these attribute
(e.g., key_size, value_size, type, etc) are available right now in struct
bpf_map_def, but this patch adds getter allowing to fetch them individually.
bpf_map_def approach isn't very scalable, when ABI stability requirements are
taken into account. It's much easier to extend libbpf and add support for new
features, when each aspect of BPF map has separate getter/setter.
Getters follow the common naming convention of not explicitly having "get" in
its name: bpf_map__type() returns map type, bpf_map__key_size() returns
key_size. Setters, though, explicitly have set in their name:
bpf_map__set_type(), bpf_map__set_key_size().
This patch ensures we now have a getter and a setter for the following
map attributes:
- type;
- max_entries;
- map_flags;
- numa_node;
- key_size;
- value_size;
- ifindex.
bpf_map__resize() enforces unnecessary restriction of max_entries > 0. It is
unnecessary, because libbpf actually supports zero max_entries for some cases
(e.g., for PERF_EVENT_ARRAY map) and treats it specially during map creation
time. To allow setting max_entries=0, new bpf_map__set_max_entries() setter is
added. bpf_map__resize()'s behavior is preserved for backwards compatibility
reasons.
Map ifindex getter is added as well. There is a setter already, but no
corresponding getter. Fix this assymetry as well. bpf_map__set_ifindex()
itself is converted from void function into error-returning one, similar to
other setters. The only error returned right now is -EBUSY, if BPF map is
already loaded and has corresponding FD.
One lacking attribute with no ability to get/set or even specify it
declaratively is numa_node. This patch fixes this gap and both adds
programmatic getter/setter, as well as adds support for numa_node field in
BTF-defined map.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200621062112.3006313-1-andriin@fb.com
Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.
The stragglers are:
* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.
* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.
* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.
v2: Fix uc i915 lookup code (Michał Winiarski)
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
Add selftests to test access to map pointers from bpf program for all
map types except struct_ops (that one would need additional work).
verifier test focuses mostly on scenarios that must be rejected.
prog_tests test focuses on accessing multiple fields both scalar and a
nested struct from bpf program and verifies that those fields have
expected values.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/139a6a17f8016491e39347849b951525335c6eb4.1592600985.git.rdna@fb.com
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
There are two different `struct bpf_htab` in bpf code in the following
files:
- kernel/bpf/hashtab.c
- net/core/sock_map.c
It makes it impossible to find proper btf_id by name = "bpf_htab" and
kind = BTF_KIND_STRUCT what is needed to support access to map ptr so
that bpf program can access `struct bpf_htab` fields.
To make it possible one of the struct-s should be renamed, sock_map.c
looks like a better candidate for rename since it's specialized version
of hashtab.
Rename it to bpf_shtab ("sh" stands for Sock Hash).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/c006a639e03c64ca50fc87c4bb627e0bfba90f4e.1592600985.git.rdna@fb.com
For perf list, the CPU core PMU HW event ordering is such that not all
events may will be listed adjacent - consider this example:
$ tools/perf/perf list
List of pre-defined events (to be used in -e):
duration_time [Tool event]
branch-instructions OR cpu/branch-instructions/ [Kernel PMU event]
branch-misses OR cpu/branch-misses/ [Kernel PMU event]
bus-cycles OR cpu/bus-cycles/ [Kernel PMU event]
cache-misses OR cpu/cache-misses/ [Kernel PMU event]
cache-references OR cpu/cache-references/ [Kernel PMU event]
cpu-cycles OR cpu/cpu-cycles/ [Kernel PMU event]
cstate_core/c3-residency/ [Kernel PMU event]
cstate_core/c6-residency/ [Kernel PMU event]
cstate_core/c7-residency/ [Kernel PMU event]
cstate_pkg/c2-residency/ [Kernel PMU event]
cstate_pkg/c3-residency/ [Kernel PMU event]
cstate_pkg/c6-residency/ [Kernel PMU event]
cstate_pkg/c7-residency/ [Kernel PMU event]
cycles-ct OR cpu/cycles-ct/ [Kernel PMU event]
cycles-t OR cpu/cycles-t/ [Kernel PMU event]
el-abort OR cpu/el-abort/ [Kernel PMU event]
el-capacity OR cpu/el-capacity/ [Kernel PMU event]
Notice in the above example how the cstate_core PMU events are mixed in
the middle of the CPU core events.
For my arm64 platform, all the uncore events get mixed in, making the list
very disorganised:
page-faults OR faults [Software event]
task-clock [Software event]
duration_time [Tool event]
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
L1-icache-loads [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
br_mis_pred OR armv8_pmuv3_0/br_mis_pred/ [Kernel PMU event]
br_mis_pred_retired OR armv8_pmuv3_0/br_mis_pred_retired/ [Kernel PMU event]
br_pred OR armv8_pmuv3_0/br_pred/ [Kernel PMU event]
br_retired OR armv8_pmuv3_0/br_retired/ [Kernel PMU event]
br_return_retired OR armv8_pmuv3_0/br_return_retired/ [Kernel PMU event]
bus_access OR armv8_pmuv3_0/bus_access/ [Kernel PMU event]
bus_cycles OR armv8_pmuv3_0/bus_cycles/ [Kernel PMU event]
cid_write_retired OR armv8_pmuv3_0/cid_write_retired/ [Kernel PMU event]
cpu_cycles OR armv8_pmuv3_0/cpu_cycles/ [Kernel PMU event]
dtlb_walk OR armv8_pmuv3_0/dtlb_walk/ [Kernel PMU event]
exc_return OR armv8_pmuv3_0/exc_return/ [Kernel PMU event]
exc_taken OR armv8_pmuv3_0/exc_taken/ [Kernel PMU event]
hisi_sccl1_ddrc0/act_cmd/ [Kernel PMU event]
hisi_sccl1_ddrc0/flux_rcmd/ [Kernel PMU event]
hisi_sccl1_ddrc0/flux_rd/ [Kernel PMU event]
hisi_sccl1_ddrc0/flux_wcmd/ [Kernel PMU event]
hisi_sccl1_ddrc0/flux_wr/ [Kernel PMU event]
hisi_sccl1_ddrc0/pre_cmd/ [Kernel PMU event]
hisi_sccl1_ddrc0/rnk_chg/ [Kernel PMU event]
...
hisi_sccl7_l3c21/wr_hit_cpipe/ [Kernel PMU event]
hisi_sccl7_l3c21/wr_hit_spipe/ [Kernel PMU event]
hisi_sccl7_l3c21/wr_spipe/ [Kernel PMU event]
inst_retired OR armv8_pmuv3_0/inst_retired/ [Kernel PMU event]
inst_spec OR armv8_pmuv3_0/inst_spec/ [Kernel PMU event]
itlb_walk OR armv8_pmuv3_0/itlb_walk/ [Kernel PMU event]
l1d_cache OR armv8_pmuv3_0/l1d_cache/ [Kernel PMU event]
l1d_cache_refill OR armv8_pmuv3_0/l1d_cache_refill/ [Kernel PMU event]
l1d_cache_wb OR armv8_pmuv3_0/l1d_cache_wb/ [Kernel PMU event]
l1d_tlb OR armv8_pmuv3_0/l1d_tlb/ [Kernel PMU event]
l1d_tlb_refill OR armv8_pmuv3_0/l1d_tlb_refill/ [Kernel PMU event]
So the events are list alphabetically. However, CPU core event listing is
special from commit dc098b35b5 ("perf list: List kernel supplied event
aliases"), in that the alias and full event is shown (in that order).
As such, the core events may become sparse.
Improve this by grouping the CPU core events and ensure that they are
listed first for kernel PMU events. For the first example, above, this
now looks like:
duration_time [Tool event]
branch-instructions OR cpu/branch-instructions/ [Kernel PMU event]
branch-misses OR cpu/branch-misses/ [Kernel PMU event]
bus-cycles OR cpu/bus-cycles/ [Kernel PMU event]
cache-misses OR cpu/cache-misses/ [Kernel PMU event]
cache-references OR cpu/cache-references/ [Kernel PMU event]
cpu-cycles OR cpu/cpu-cycles/ [Kernel PMU event]
cycles-ct OR cpu/cycles-ct/ [Kernel PMU event]
cycles-t OR cpu/cycles-t/ [Kernel PMU event]
el-abort OR cpu/el-abort/ [Kernel PMU event]
el-capacity OR cpu/el-capacity/ [Kernel PMU event]
el-commit OR cpu/el-commit/ [Kernel PMU event]
el-conflict OR cpu/el-conflict/ [Kernel PMU event]
el-start OR cpu/el-start/ [Kernel PMU event]
instructions OR cpu/instructions/ [Kernel PMU event]
mem-loads OR cpu/mem-loads/ [Kernel PMU event]
mem-stores OR cpu/mem-stores/ [Kernel PMU event]
ref-cycles OR cpu/ref-cycles/ [Kernel PMU event]
topdown-fetch-bubbles OR cpu/topdown-fetch-bubbles/ [Kernel PMU event]
topdown-recovery-bubbles OR cpu/topdown-recovery-bubbles/ [Kernel PMU event]
topdown-slots-issued OR cpu/topdown-slots-issued/ [Kernel PMU event]
topdown-slots-retired OR cpu/topdown-slots-retired/ [Kernel PMU event]
topdown-total-slots OR cpu/topdown-total-slots/ [Kernel PMU event]
tx-abort OR cpu/tx-abort/ [Kernel PMU event]
tx-capacity OR cpu/tx-capacity/ [Kernel PMU event]
tx-commit OR cpu/tx-commit/ [Kernel PMU event]
tx-conflict OR cpu/tx-conflict/ [Kernel PMU event]
tx-start OR cpu/tx-start/ [Kernel PMU event]
cstate_core/c3-residency/ [Kernel PMU event]
cstate_core/c6-residency/ [Kernel PMU event]
cstate_core/c7-residency/ [Kernel PMU event]
cstate_pkg/c2-residency/ [Kernel PMU event]
cstate_pkg/c3-residency/ [Kernel PMU event]
cstate_pkg/c6-residency/ [Kernel PMU event]
cstate_pkg/c7-residency/ [Kernel PMU event]
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1592384514-119954-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These are broadly useful but required to handle TMA metrics. For example
encoding Ports_Utilization from:
https://download.01.org/perfmon/TMA_Metrics.csv
requires '<'.
{
"BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related). Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.",
"MetricExpr": "( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) if ( cpu@ARITH.DIVIDER_ACTIVE\\,cmask\\=1@ < cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) else ( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) - cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) )",
"MetricGroup": "Topdown_Group_Ports_Utilization",
"MetricName": "Topdown_Metric_Ports_Utilization"
},
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200610235823.52557-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixups related to the introduction of libperf, where the
perf_{evsel,evlist}__ prefix is reserved for functions operating on
struct perf_{evsel,evlist}.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding new metric test for frontend metric. It's stolen from x86 pmu
events.
Committer testing:
# perf test "Parse and process metrics"
67: Parse and process metrics : Ok
# perf test -v "Parse and process metrics"
#
67: Parse and process metrics :
--- start ---
test child forked, pid 104881
metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
found event inst_retired.any
found event cpu_clk_unhalted.thread
adding {inst_retired.any,cpu_clk_unhalted.thread}:W
metric expr idq_uops_not_delivered.core / (4 * (( ( cpu_clk_unhalted.thread / 2 ) * ( 1 + cpu_clk_unhalted.one_thread_active / cpu_clk_unhalted.ref_xclk ) ))) for Frontend_Bound_SMT
found event cpu_clk_unhalted.one_thread_active
found event cpu_clk_unhalted.ref_xclk
found event idq_uops_not_delivered.core
found event cpu_clk_unhalted.thread
adding {cpu_clk_unhalted.one_thread_active,cpu_clk_unhalted.ref_xclk,idq_uops_not_delivered.core,cpu_clk_unhalted.thread}:W
test child finished with 0
---- end ----
Parse and process metrics: Ok
#
Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:
tests/parse-metric.c:154:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
{ 0 },
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding new test that process metrics code and checks the expected
results. Starting with easy ipc metric.
Committer testing:
# perf test "Parse and process metrics"
67: Parse and process metrics : Ok
#
# perf test -v "Parse and process metrics"
67: Parse and process metrics :
--- start ---
test child forked, pid 103402
metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
found event inst_retired.any
found event cpu_clk_unhalted.thread
adding {inst_retired.any,cpu_clk_unhalted.thread}:W
test child finished with 0
---- end ----
Parse and process metrics: Ok
#
Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:
tests/parse-metric.c:135:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
{ 0 },
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
