Command line parameters might set static keys. This is true for s390 at
least since commit 6471384af2 ("mm: security: introduce init_on_alloc=1
and init_on_free=1 boot options"). To avoid the following WARN:
static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used
before call to jump_label_init()
call jump_label_init() just before parse_early_param().
jump_label_init() is safe to call multiple times (x86 does that), doesn't
do any memory allocations and hence should be safe to call that early.
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Cc: <stable@vger.kernel.org> # 5.3: d6df52e999: s390/maccess: add no DAT mode to kernel_write
Cc: <stable@vger.kernel.org> # 5.3
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
To be able to patch kernel code before paging is initialized do plain
memcpy if DAT is off. This is required to enable early jump label
initialization.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In usual IPL or hot plug scenarios a zPCI function transitions directly
from reserved (invisible to Linux) to configured state or is configured
by Linux itself using an SCLP, however it can also first go from
reserved to standby and then from standby to configured without
Linux initiative.
In this scenario we first get a PEC event 0x302 and then 0x301. This may
happen for example when the device is deconfigured at another LPAR and
made available for this LPAR. It may also happen under z/VM when
a device is attached while in some inconsistent state.
However when we get the 0x301 the device is already known to zPCI
so calling zpci_create() will add it twice resulting in the below
BUG. Instead we should only enable the existing device and finally
scan it through the PCI subsystem.
list_add double add: new=00000000ed5a9008, prev=00000000ed5a9008, next=0000000083502300.
kernel BUG at lib/list_debug.c:31!
Krnl PSW : 0704c00180000000 0000000082dc2db8 (__list_add_valid+0x70/0xa8)
Call Trace:
[<0000000082dc2db8>] __list_add_valid+0x70/0xa8
([<0000000082dc2db4>] __list_add_valid+0x6c/0xa8)
[<00000000828ea920>] zpci_create_device+0x60/0x1b0
[<00000000828ef04a>] zpci_event_availability+0x282/0x2f0
[<000000008315f848>] chsc_process_crw+0x2b8/0xa18
[<000000008316735c>] crw_collect_info+0x254/0x348
[<00000000829226ea>] kthread+0x14a/0x168
[<000000008319d5c0>] ret_from_fork+0x24/0x2c
Fixes: f606b3ef47 ("s390/pci: adapt events for zbus")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was
hanging silently.
memblock_add() seems not appropriate, since using MAX_NUMNODES
as node id, while memblock_add_node() sets up memory for node id 0.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:
BUG: Bad page state in process swapper pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
[<40088470>] 0x40088470
[<40088504>] 0x40088504
[<40088a12>] 0x40088a12
[<402ca000>] 0x402ca000
[<400a0934>] 0x400a0934
Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Else there may be magic numbers in /sys/kernel/debug/block/*/state.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget to wake up a process to which io_rw_reissue() added
task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To prevent default "trace_printks()" from spamming the top level tracing
ring buffer, only allow trace instances to use trace_array_printk() (which
can be used without the trace_printk() start up warning).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The value of the lapic_timer_always_reliable static variable in
the intel_idle driver reflects the boot_cpu_has(X86_FEATURE_ARAT)
value and so it also reflects the static_cpu_has(X86_FEATURE_ARAT)
value.
Hence, the lapic_timer_always_reliable check in intel_idle() is
redundant and apart from this lapic_timer_always_reliable is only
used in two places in which boot_cpu_has(X86_FEATURE_ARAT) can be
used directly.
Eliminate the lapic_timer_always_reliable variable in accordance
with the above observations.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the kernel panics, one page of kmsg data may be collected and sent to
Hyper-V to aid in diagnosing the failure. The collected kmsg data typically
contains 50 to 100 lines, each of which has a log level prefix that isn't
very useful from a diagnostic standpoint. So tell kmsg_dump_get_buffer()
to not include the log level, enabling more information that *is* useful to
fit in the page.
Requesting in stable kernels, since many kernels running in production are
stable releases.
Cc: stable@vger.kernel.org
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1593210497-114310-1-git-send-email-joseph.salisbury@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
"Result is undefined for negative divisors if the dividend variable
type is unsigned and for negative dividends if the divisor variable
type is unsigned."
In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.
This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.
Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283 ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
The function cpu_power_to_freq is used to find a frequency and set the
cooling device to consume at most the power to be converted. For example,
if the power to be converted is 80mW, and the em table is as follow.
struct em_cap_state table[] = {
/* KHz mW */
{ 1008000, 36, 0 },
{ 1200000, 49, 0 },
{ 1296000, 59, 0 },
{ 1416000, 72, 0 },
{ 1512000, 86, 0 },
};
The target frequency should be 1416000KHz, not 1512000KHz.
Fixes: 349d39dc57 ("thermal: cpu_cooling: merge frequency and power tables")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
After merging tsens-common.c into tsens.c, we can now mark some
functions static so they don't need any prototype declarations. This
fixes the following issue reported by lkp.
>> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes]
385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes]
455 | irqreturn_t tsens_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes]
523 | int tsens_set_trips(void *_sensor, int low, int high)
| ^~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes]
560 | int tsens_enable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes]
573 | void tsens_disable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
Add constants for the prescaler and divisor registers. Document and
name register 0x25, and put the LCR define to more use.
The 0x25 register (CH341_REG_LCR2) is only used by CH341 chips before
version 0x30 and is involved in configuring the line control parameters.
It's not known to the author whether there any such chips in the wild,
and Linux' ch341 driver never supported them. For chip version 0x30 and
above the 0x25 register is always set to zero. The alternative would've
been to not set the register at all, but that may have unintended
effects.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/2e80916d-1be8-dc0f-abf9-adc0feea1803@msgid.hansmi.ch
[ johan: fix up comment ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
(cherry picked from commit 5a7eeb8ba1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Refresh the defconfig for Renesas ARM boards:
- Drop CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 (no longer
needed since commit 39c3e30456 ("ARM: 8984/1: Kconfig: set
default ZBOOT_ROM_TEXT/BSS value to 0x0")),
- Move CONFIG_MEDIA_SUBDRV_AUTOSELECT (moved in commit
1b80d36aeb ("media: Kconfig: move the position of sub-driver
autoselection")),
- Drop CONFIG_MEDIA_CONTROLLER=y and CONFIG_VIDEO_V4L2_SUBDEV_API=y
(auto-enabled since commit 32a363d0b0 ("media: Kconfig files:
use select for V4L2 subdevs and MC")),
- Enable CONFIG_MEDIA_PLATFORM_SUPPORT (needed since commit
06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200624131931.3686-2-geert+renesas@glider.be
generic_file_fsync() exfat used could not guarantee the consistency of
a file because it has flushed not dirty metadata but only dirty data pages
for a file.
Instead of that, use exfat_file_fsync() for files and directories so that
it guarantees to commit both the metadata and data pages for a file.
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We need to commit dirty metadata and pages to disk
before remounting exfat as read-only.
This fixes a failure in xfstests generic/452
generic/452 does the following:
cp something <exfat>/
mount -o remount,ro <exfat>
the <exfat>/something is corrupted. because while
exfat is remounted as read-only, exfat doesn't
have a chance to commit metadata and
vfs invalidates page caches in a block device.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If the second exfat_get_dentry() call fails then we need to release
"old_bh" before returning. There is a similar bug in exfat_move_file().
Fixes: 5f2aa07507 ("exfat: add inode operations")
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Some fsck tool complain that padding part of the FileName field
is not set to the value 0000h. So let's maintain filesystem cleaner,
as exfat's spec. recommendation.
Signed-off-by: Hyeongseok.Kim <Hyeongseok@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
When a DMA coherent pool is depleted, allocation failures may or may not
get reported in the kernel log depending on the allocator.
The admin does have a workaround, however, by using coherent_pool= on the
kernel command line.
Provide some guidance on the failure and a recommended minimum size for
the pools (double the size).
Signed-off-by: David Rientjes <rientjes@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a selftest for the usage of FPU code in kernel mode.
Currently only implemented for x86. In the future, kernel FPU testing
could be unified between the different architectures supporting it.
[ bp:
- Split out from a conglomerate patch, put comments over statements.
- run the test only on debugfs write.
- Add bare-minimum run_test_fpu.sh, run 1000 iterations on all CPUs
by default.
- Add conditionally -msse2 so that clang doesn't generate library
calls.
- Use cc-option to detect gcc 7.1 not supporting -mpreferred-stack-boundary=3 (amluto).
- Document stuff so that we don't forget.
- Fix:
ld: lib/test_fpu.o: in function `test_fpu_get':
>> test_fpu.c:(.text+0x16e): undefined reference to `__sanitizer_cov_trace_cmpd'
>> ld: test_fpu.c:(.text+0x1a7): undefined reference to `__sanitizer_cov_trace_cmpd'
ld: test_fpu.c:(.text+0x1e0): undefined reference to `__sanitizer_cov_trace_cmpd'
]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200624114646.28953-3-bp@alien8.de
Previously, kernel floating point code would run with the MXCSR control
register value last set by userland code by the thread that was active
on the CPU core just before kernel call. This could affect calculation
results if rounding mode was changed, or a crash if a FPU/SIMD exception
was unmasked.
Restore MXCSR to the kernel's default value.
[ bp: Carve out from a bigger patch by Petteri, add feature check, add
FNINIT call too (amluto). ]
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979
Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de
