Siena needs four TX queues (csum * highpri), EF10 needs two (csum),
and EF100 only needs one (as checksumming is controlled entirely by
the transmit descriptor). Rather than having various bits of ad-hoc
code to decide which queues to set up etc., put the knowledge of how
many TXQs a channel has in one place.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of exposing this old module parameter on the new driver (thus
having to keep it forever after for compatibility), let's confine it
to the old one; if we find later that we need the feature, we ought
to support it properly, with ethtool set-channels.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
EF100 only supports MSI-X, so there's no need for the new driver to
expose this old module parameter.
Since it's now visible to the linker, we have to rename it internally
to efx_interrupt_mode to avoid symbol collisions in non-modular
builds.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All NICs supported by this driver are capable of MSI-X interrupts (only
Falcon A1 wasn't, and that's now hived off into its own driver), so no
need for a nic-type parameter. Besides, the code that checked it was
buggy anyway (the following assignment that checked min_interrupt_mode
overrode it).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unprivileged functions (such as VFs) may set their MTU by use of the
'control' field of MC_CMD_SET_MAC_EXT, as used in efx_mcdi_set_mtu().
If calling efx_ef10_mac_reconfigure() from efx_change_mtu(), and the
NIC supports the above (SET_MAC_ENHANCED capability), use it rather
than efx_mcdi_set_mac().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable act is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I would like that Claudiu becomes co-maintainer of the Cadence macb
driver. He's already participating to lots of reviews and enhancements
to this driver and knows the different versions of this controller.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: simplify endpoint programming
Add tests to functions so they don't update undefined endpoint
registers, rather than requiring the caller to avoid calling them.
Move the call to a workaround function required when suspending
inside the function that puts an endpoint into suspend mode. This
requires moving a few functions (which are otherwise unchanged).
Then simplify ipa_endpoint_program() to call essentially all
endpoint register update functions unconditionally.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Have functions that write endpoint configuration registers return
immediately if they are not valid for the direction of transfer for
the endpoint. This allows most of the calls in ipa_endpoint_program()
to be made unconditionally. Reorder the register writes to match
the order of their definition (based on offset).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.0+ does not support endpoint suspend. Put a test at
the top of ipa_endpoint_program_suspend() that returns immediately
if suspend is not supported rather than making that check in the caller.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 3.5.1 has a hardware quirk that requires special
handling if an RX endpoint is suspended while aggregation is active.
This handling is implemented by ipa_endpoint_suspend_aggr().
Have ipa_endpoint_program_suspend() be responsible for calling
ipa_endpoint_suspend_aggr() if suspend mode is being enabled on
an endpoint. If the endpoint does not support aggregation, or if
aggregation isn't active, this call will continue to have no effect.
Move the definition of ipa_endpoint_suspend_aggr() up in the file so
its definition precedes the new earlier reference to it. This
requires ipa_endpoint_aggr_active() and ipa_endpoint_force_close()
to be moved as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.2 has a hardware quirk that affects endpoint delay
mode, so it isn't used there. Isolate the test that avoids using
delay mode for that version inside ipa_endpoint_program_delay(),
rather than making that check in the caller.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain configurations without power management support, the
following warnings happen:
drivers/net/ethernet/mellanox/mlx4/main.c:4388:12:
warning: 'mlx4_resume' defined but not used [-Wunused-function]
4388 | static int mlx4_resume(struct device *dev_d)
| ^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx4/main.c:4373:12: warning:
'mlx4_suspend' defined but not used [-Wunused-function]
4373 | static int mlx4_suspend(struct device *dev_d)
| ^~~~~~~~~~~~
Mark these functions as __maybe_unused to make it clear to the
compiler that this is going to happen based on the configuration,
which is the standard for these types of functions.
Fixes: 0e3e206a3e ("mlx4: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain configurations without power management support, gcc report
the following warning:
drivers/net/ethernet/micrel/ksz884x.c:7182:12: warning:
'pcidev_suspend' defined but not used [-Wunused-function]
7182 | static int pcidev_suspend(struct device *dev_d)
| ^~~~~~~~~~~~~~
Mark pcidev_suspend() as __maybe_unused to make it clear.
Fixes: 64120615d1 ("ksz884x: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea says:
====================
net: macb: few code cleanups
Patches in this series cleanup a bit macb code.
Changes in v2:
- in patch 2/4 use hweight32() instead of hweight_long()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove is_udp variable that is used in only one place and use
ip_hdr(skb)->protocol == IPPROTO_UDP check instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bit 0 of queue_mask is set at the beginning of
macb_probe_queues() function. Do not set it again after reading
DGFG6 but instead use "|=" operator.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today xenbus_map_ring_valloc() can return either a negative errno
value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as
e.g -ENOMEM and GNTST_eagain have the same numeric value.
Fix that by turning all grant mapping errors into -ENOENT. This is
no problem as all callers of xenbus_map_ring_valloc() only use the
return value to print an error message, and in case of mapping errors
the grant status value has already been printed by __xenbus_map_ring()
before.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xenbus_map_ring_valloc() and its sub-functions are putting quite large
structs and arrays on the stack. This is problematic at runtime, but
might also result in build failures (e.g. with clang due to the option
-Werror,-Wframe-larger-than=... used).
Fix that by moving most of the data from the stack into a dynamically
allocated struct. Performance is no issue here, as
xenbus_map_ring_valloc() is used only when adding a new PV device to
a backend driver.
While at it move some duplicated code from pv/hvm specific mapping
functions to the single caller.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Horatiu Vultur says:
====================
bridge: mrp: Add support for getting the status
This patch series extends the MRP netlink interface to allow the userspace
daemon to get the status of the MRP instances in the kernel.
v3:
- remove misleading comment
- fix to use correctly the RCU
v2:
- fix sparse warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the function br_fill_ifinfo to return also the MRP
status for each instance on a bridge. It also adds a new filter
RTEXT_FILTER_MRP to return the MRP status only when this is set, not to
interfer with the vlans. The MRP status is return only on the bridge
interfaces.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MRP attribute IFLA_BRIDGE_MRP_INFO to allow the userspace to get the
current state of the MRP instances. This is a nested attribute that
contains other attributes like, ring id, index of primary and secondary
port, priority, ring state, ring role.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This essentially reverts commit 7212303268 ("tcp: md5: reject TCP_MD5SIG
or TCP_MD5SIG_EXT on established sockets")
Mathieu reported that many vendors BGP implementations can
actually switch TCP MD5 on established flows.
Quoting Mathieu :
Here is a list of a few network vendors along with their behavior
with respect to TCP MD5:
- Cisco: Allows for password to be changed, but within the hold-down
timer (~180 seconds).
- Juniper: When password is initially set on active connection it will
reset, but after that any subsequent password changes no network
resets.
- Nokia: No notes on if they flap the tcp connection or not.
- Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until
both sides are ok with new passwords.
- Meta-Switch: Expects the password to be set before a connection is
attempted, but no further info on whether they reset the TCP
connection on a change.
- Avaya: Disable the neighbor, then set password, then re-enable.
- Zebos: Would normally allow the change when socket connected.
We can revert my prior change because commit 9424e2e7ad ("tcp: md5: fix potential
overestimation of TCP option space") removed the leak of 4 kernel bytes to
the wire that was the main reason for my patch.
While doing my investigations, I found a bug when a MD5 key is changed, leading
to these commits that stable teams want to consider before backporting this revert :
Commit 6a2febec33 ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Commit e6ced831ef ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers")
Fixes: 7212303268 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we have "ti,no-idle" specified for a module we must not disable
the the module on suspend to keep things backwards compatible.
Fixes: 386cb76681 ("bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init")
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Avoid waking up the device and taking stale locks if we know that the
object is not currently mmapped. This is particularly useful as not many
object are actually mmapped and so we can destroy them without waking
the device up, and gives us a little more freedom of workqueue ordering
during shutdown.
v2: Pull the release_mmap() into its single user in freeing the objects,
where there can not be any race with a concurrent user of the freed
object. Or so one hopes!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-2-chris@chris-wilson.co.uk
bio_alloc_bioset references current->bio_list[1], so we need to
initialize it for the blk-mq submission path as well.
Fixes: ff93ea0ce7 ("block: shortcut __submit_bio_noacct for blk-mq drivers")
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a race condition where ib_nl_make_request() inserts the request
data into the linked list but the timer in ib_nl_request_timeout() can see
it and destroy it before ib_nl_send_msg() is done touching it. This could
happen, for instance, if there is a long delay allocating memory during
nlmsg_new()
This causes a use-after-free in the send_mad() thread:
[<ffffffffa02f43cb>] ? ib_pack+0x17b/0x240 [ib_core]
[ <ffffffffa032aef1>] ib_sa_path_rec_get+0x181/0x200 [ib_sa]
[<ffffffffa0379db0>] rdma_resolve_route+0x3c0/0x8d0 [rdma_cm]
[<ffffffffa0374450>] ? cma_bind_port+0xa0/0xa0 [rdma_cm]
[<ffffffffa040f850>] ? rds_rdma_cm_event_handler_cmn+0x850/0x850 [rds_rdma]
[<ffffffffa040f22c>] rds_rdma_cm_event_handler_cmn+0x22c/0x850 [rds_rdma]
[<ffffffffa040f860>] rds_rdma_cm_event_handler+0x10/0x20 [rds_rdma]
[<ffffffffa037778e>] addr_handler+0x9e/0x140 [rdma_cm]
[<ffffffffa026cdb4>] process_req+0x134/0x190 [ib_addr]
[<ffffffff810a02f9>] process_one_work+0x169/0x4a0
[<ffffffff810a0b2b>] worker_thread+0x5b/0x560
[<ffffffff810a0ad0>] ? flush_delayed_work+0x50/0x50
[<ffffffff810a68fb>] kthread+0xcb/0xf0
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
[<ffffffff816f25a7>] ret_from_fork+0x47/0x90
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
The ownership rule is once the request is on the list, ownership transfers
to the list and the local thread can't touch it any more, just like for
the normal MAD case in send_mad().
Thus, instead of adding before send and then trying to delete after on
errors, move the entire thing under the spinlock so that the send and
update of the lists are atomic to the conurrent threads. Lightly reoganize
things so spinlock safe memory allocations are done in the final NL send
path and the rest of the setup work is done before and outside the lock.
Fixes: 3ebd2fd0d0 ("IB/sa: Put netlink request into the request list before sending")
Link: https://lore.kernel.org/r/1592964789-14533-1-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix sparse build warning:
block/bio-integrity.c:27:6: warning:
symbol '__bio_integrity_free' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around
5 intel_dport
36 dport
479 intel_dig_port
352 dig_port
Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.
v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
Pull NVMe fixes from Christoph.
* 'nvme-5.8' of git://git.infradead.org/nvme:
nvme: fix a crash in nvme_mpath_add_disk
nvme: fix identify error status silent ignore
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with RTC probe:
BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:1736
...
(sysc_quirk_rtc) from [<c060d01c>] (sysc_write_sysconfig+0x1c/0x60)
(sysc_write_sysconfig) from [<c060d9f4>] (sysc_enable_module+0x11c/0x274)
(sysc_enable_module) from [<c060f37c>] (sysc_probe+0xe9c/0x1380)
(sysc_probe) from [<c06e9384>] (platform_drv_probe+0x48/0x98)
Fixes: e8639e1c98 ("bus: ti-sysc: Handle module unlock quirk needed for some RTC")
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have support for emulating a number of deprecated instructions in the
kernel with individual Kconfig options enabling this support per
instruction. In addition to the Kconfig options we also provide runtime
control via sysctls but this is not currently mentioned in the Kconfig so
not very discoverable for users. This is particularly important for
SWP/SWPB since this is disabled by default at runtime and must be enabled
via the sysctl, causing considerable frustration for users who have enabled
the config option and are then confused to find that the instruction is
still faulting.
Add a reference to the sysctls in the help text for each of the config
options, noting that SWP/SWPB is disabled by default, to improve the
user experience.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200625131507.32334-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.
However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.
Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.
Fixes: d0899892ed ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com
Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with
wakeirqs and serial console idled:
BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:242
...
(sysc_wait_softreset) from [<c0606894>] (sysc_enable_module+0x48/0x274)
(sysc_enable_module) from [<c0606c5c>] (sysc_runtime_resume+0x19c/0x1d8)
(sysc_runtime_resume) from [<c0606cf0>] (sysc_child_runtime_resume+0x58/0x84)
(sysc_child_runtime_resume) from [<c06eb7bc>] (__rpm_callback+0x30/0x12c)
(__rpm_callback) from [<c06eb8d8>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c06eb434>] (rpm_resume+0x638/0x7fc)
(rpm_resume) from [<c06eb658>] (__pm_runtime_resume+0x60/0x9c)
(__pm_runtime_resume) from [<c06edc08>] (handle_threaded_wake_irq+0x24/0x60)
(handle_threaded_wake_irq) from [<c01befec>] (irq_thread_fn+0x1c/0x78)
(irq_thread_fn) from [<c01bf30c>] (irq_thread+0x140/0x26c)
We have __pm_runtime_resume() call the sysc_runtime_resume() with spinlock
held and interrupts disabled.
Fixes: d46f9fbec7 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
