Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas Gigabit Ethernet Controller on R-Car V3H, as used on the
Condor and V3HSK boards,
- Sony IMX219 and OmniVision OV5645 cameras, as used on the
AISTARVISION MIPI Adapter V2.1,
- Analog Devices ADV7511 HDMI audio, as used on various boards
(Condor, Draak, Eagle, Ebisu, V3HSK, and V3MSK).
All of the above are modular, except for Ethernet support (HDMI Audio
support is an optional feature of the modular ADV7511 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200630171500.11438-1-geert+renesas@glider.be
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards,
- Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards,
- Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach
audiocamera shield expansion board,
- Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the
Koelsch and Lager boards,
- Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1
boards.
All of the above are modular (CEC support is an optional feature of the
modular ADV7604 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
uio_pdrv_genirq and uio_dmem_genirq interrupts are handled in
userspace. So the condition for the interrupt hasn't normally not been
cleared when top half returns. disable_irq_nosync is called in top half,
but since that normally is lazy the irq isn't actually disabled.
For level triggered interrupts this will always result in a spurious
additional fire since the level in to the interrupt controller still is
active. The actual interrupt handler isn't run though since this
spurious irq is just recorded, and later on discared (for level).
This commit disables lazy masking for level triggered interrupts. It
leaves edge triggered interrupts as before, because they work with the
lazy scheme.
All other UIO drivers already seem to clear the interrupt cause at
driver levels.
Example of double fire. First goes all the way up to
uio_pdrv_genirq_handler, second is terminated in handle_fasteoi_irq and
marked as pending.
<idle>-0 [000] d... 8.245870: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245873: uio_pdrv_genirq_handler: disable irq 29
<idle>-0 [000] d... 8.245878: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245880: handle_fasteoi_irq: irq 29 PENDING
HInt-34 [001] d... 8.245897: uio_pdrv_genirq_irqcontrol: enable irq 29
Tested on 5.7rc2 using uio_pdrv_genirq and a custom Xilinx MPSoC board.
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Link: https://lore.kernel.org/r/20200628141229.16121-1-thommyj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to the changes made in 270579d95f ("uio_mf624: Align memory
regions to page size and set correct offsets"), this will allow
uio_pdrv_genirq devices to expose memory regions that is not page-aligned,
requiring the users to respect the offset sysfs attribute (as implemented
in libuio).
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20200701145659.3978-4-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While e3a3c3a205 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt") added support for using uio_pdrv_genirq for devices without
interrupt for device tree platforms, the removal of uio_pdrv in
26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
broke the support for non device tree platforms.
This change fixes this, so that uio_pdrv_genirq can be used without
interrupt on all platforms.
This still leaves the support that uio_pdrv had for custom interrupt
handler lacking, as uio_pdrv_genirq does not handle it (yet).
Fixes: 26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the sysfs attributes serialnr and
mkvps for cex2c and cex3c cards. These sysfs attributes
are available for cex4c and higher since
commit 7c4e91c095 ("s390/zcrypt: new sysfs attributes serialnr and mkvps")'
and this patch now provides the same for the older cex2
and cex3 cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is a state machine held for each ap queue device.
The states and functions related to this where somethimes
noted with _sm_ somethimes without. This patch clarifies
and renames all the ap queue state machine related functions,
enums and defines to have a _sm_ in the name.
There is no functional change coming with this patch - it's
only beautifying code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The zcrpyt_unlocked_ioctl() function has become large. So split away
into new static functions the 4 ioctl ICARSAMODEXPO, ICARSACRT,
ZSECSENDCPRB and ZSENDEP11CPRB. This makes the code more readable and
is a preparation step for further improvements needed on these ioctls.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Some beautifications related to the internal only used
struct ap_message and related code. Instead of one int carrying
only the special flag now a u32 flags field is used.
At struct CPRBX the pointers to additional data are now marked
with __user. This caused some changes needed on code, where
these structs are also used within the zcrypt misc functions.
The ica_rsa_* structs now use the generic types __u8, __u32, ...
instead of char, unsigned int.
zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
When multiple interface on different channels are in use. It is
necessary to advertise the AP that the device is no more awake before to
switch to the other channel.
Until now, PS-Poll was the preferred mechanism for that. However. The
new firmwares (>= 3.7) now nicely support FastPS.
FastPS improves bandwidth and compatibility with AP.
This patch drop the complex and rarely used mechanism introduced in the
commit dd5eba1bb5 ("staging: wfx: fix support for AP that do not
support PS-Poll") and use FastPS as soon as it is possible.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some advanced usage or debug scenarios, it could interesting to
change the value of ps_timeout or eventually to force use of PS-Poll
frames.
The wext API (used by iwconfig) provide a way to change ps_timeout.
However, this API is obsolete and it seems a little weird to use (it
seems it does apply the change, so the user have to disable then
re-enable de power save)
On side of nl80211, there is no way to change the ps_timeout.
This patch provides a file in debugfs to change the value of ps_timeout.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To enable the TKIP/CCMP replay protection, the frames has to be
processed in the right order. However, the device is not able to
re-order the frames during BlockAck sessions.
Mac80211 is able to reorder the frames, but it need the information
about the BlockAck sessions start and stop. Unfortunately, since the
BlockAck is fully handled by the hardware, these frames were not
forwarded to the host. So, if the driver ask to mac80211 to apply the
replay protection, it drop all misordered frames.
So, until now, the driver explicitly asked to mac80211 to not apply
the CCMP/TKIP replay protection.
The situation has changed with the API 3.4 of the device firmware. The
firmware forward the BlockAck information. Mac80211 is now able to
correctly reorder the frames. There is no more reasons to drop
cryptographic data.
This patch also impact the older firmwares. There will be a performance
impact on these firmware (since the misordered frames will dropped).
However, we can't keep the replay protection disabled.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that in the old days, the RSSI information could be missing. In
this case, in order to not pollute the RSSI stats, the frame was
dropped (!).
It is far better to mark the frame with the flag RX_FLAG_NO_SIGNAL_VAL.
In add, the problem seems now fixed in the firmware (at least, it has
not been encountered with recent firmwares).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a station go to sleep, the driver receive the status REQUEUE and
forward this answer to mac80211. So, neither the driver, neither the
hardware buffer the frames. So the call to ieee80211_sta_set_buffered is
useless.
In add, it seems that mac80211 does not expect to receive
ieee80211_sta_set_buffered(false) after the station is asleep(). When
the device send data to a station, the following sequence can be
observed:
- Mac80211 call wfx_sta_notify(awake).
- The driver calls ieee80211_sta_set_buffered(true). Since the
station is awake, its TIM is not set.
- Mac80211 receive a power save notification from the station, so it
calls wfx_sta_notify(asleep).
- Then, since the driver has declared it has buffered some frames,
the TIM of the station should be set. This action is delayed by
mac80211.
- The device also notice the station go to sleep. It replies the
REQUEUE status for the buffered frames. The driver forward this
status to mac80211.
- There is no more frames in queues, so the driver call
ieee80211_sta_set_buffered(false).
- Mac80211 updates the TIM but since there is no frames buffered by
the driver, it set the TIM for the station to 0.
Anyway, correctly use the ieee80211_sta_set_buffered() API solves the
problem.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the loading of the firmware, the WFX_DCA_GET register provide the
number available bytes in the receiving buffer. It is not necessary to
access to the WFX_DCA_GET after sent of each firmware fragment.
This patch allows to send the firmware:
- in 64ms instead of 130ms using SDIO bus
- in 78ms instead of 115ms using SPI bus
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device is able to send multiple Tx confirmations in the one reply.
In this case, there is only one vif identifier for all the
confirmations.
Unfortunately, to generate this kind of messages the device squashes all
the confirmations whatever their vif ID and use the vif ID of the first
confirmation. So, the driver cannot rely on the vif ID mentioned in the
header. Fortunately, using the packet_id, the driver can retrieve the Tx
request and the associated vif.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.
This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value of 'maxsize' has not been checked since commit 729cac693e
("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but
unused variable, which fixes the following W=1 kernel build warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’:
drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable]
885 | u32 maxsize = 0;
| ^~~~~~~
Cc: Minas Harutyunyan <hminas@synopsys.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file has a HUGE debugging sysfs file that spews out a lot of
information all at once, which violates the one-value-per-file rule for
sysfs. If this is really needed, it should go into debugfs, but given
the age of this driver, I strongly doubt anyone is using it anymore.
So just remove the file entirely, it was never documented, so obviously,
no one actually needed it :)
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20200702072914.1072878-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we assign 'epnum' during the declaration we can also avoid "ISO
C90 forbids mixed declarations" issues. So it does looks like we
can have our cake and eat it in this scenario.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’:
drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable]
2040 | struct ehci_qtd *qtd;
| ^~~
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: "Eurotech S.p.A" <info@eurtech.it>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
