On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is
not stable (resulting in large block tiling noise in some applications).
Disabling GFXOFF via the quirk list fixes the problems for me.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since for sriov, baco happens on host side, no need and meaning
to judge is baco.
also, since kiq reads strap0 in here, if kiq is not ready
or gpu reset(kiq resume) happens after this read, would fail
to read and wrongly set baco as true(1).
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We recorded the dependencies for WAIT_FOR_SUBMIT in order that we could
correctly perform priority inheritance from the parallel branches to the
common trunk. However, for the purpose of timeslicing and reset
handling, the dependency is weak -- as we the pair of requests are
allowed to run in parallel and not in strict succession.
The real significance though is that this allows us to rearrange
groups of WAIT_FOR_SUBMIT linked requests along the single engine, and
so can resolve user level inter-batch scheduling dependencies from user
semaphores.
Fixes: c81471f5e9 ("drm/i915: Copy across scheduler behaviour flags across submit fences")
Testcase: igt/gem_exec_fence/submit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507155109.8892-1-chris@chris-wilson.co.uk
(cherry picked from commit 6b6cd2ebd8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 0b718ba1e8.
There are still some residual issues with asynchronous binding and
execution, but since commit 92581f9fb9 ("drm/i915: Immediately execute
the fenced work") we prefer not to use asynchronous binds, and the
remaining issues do not seem restricted to Cherryview [at least the ones
seen over a few dozen CI runs, less frequent issues are sure to be
discovered!]
These issues seem to be mitigated, if not eliminated entirely, by the
previous commit 84eac0c659 ("drm/i915/gt: Force pte cacheline to main
memory").
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-3-chris@chris-wilson.co.uk
Presumably the intent here was that hmm_range_fault() could put the data
into some HW specific format and thus avoid some work. However, nothing
actually does that, and it isn't clear how anything actually could do that
as hmm_range_fault() provides CPU addresses which must be DMA mapped.
Perhaps there is some special HW that does not need DMA mapping, but we
don't have any examples of this, and the theoretical performance win of
avoiding an extra scan over the pfns array doesn't seem worth the
complexity. Plus pfns needs to be scanned anyhow to sort out any
DEVICE_PRIVATE pages.
This version replaces the uint64_t with an usigned long containing a pfn
and fixed flags. On input flags is filled with the HMM_PFN_REQ_* values,
on successful output it is filled with HMM_PFN_* values, describing the
state of the pages.
amdgpu is simple to convert, it doesn't use snapshot and doesn't use
per-page flags.
nouveau uses only 16 hmm_pte entries at most (ie fits in a few cache
lines), and it sweeps over its pfns array a couple of times anyhow. It
also has a nasty call chain before it reaches the dma map and hardware
suggesting performance isn't important:
nouveau_svm_fault():
args.i.m.method = NVIF_VMM_V0_PFNMAP
nouveau_range_fault()
nvif_object_ioctl()
client->driver->ioctl()
struct nvif_driver nvif_driver_nvkm:
.ioctl = nvkm_client_ioctl
nvkm_ioctl()
nvkm_ioctl_path()
nvkm_ioctl_v0[type].func(..)
nvkm_ioctl_mthd()
nvkm_object_mthd()
struct nvkm_object_func nvkm_uvmm:
.mthd = nvkm_uvmm_mthd
nvkm_uvmm_mthd()
nvkm_uvmm_mthd_pfnmap()
nvkm_vmm_pfn_map()
nvkm_vmm_ptes_get_map()
func == gp100_vmm_pgt_pfn
struct nvkm_vmm_desc_func gp100_vmm_desc_spt:
.pfn = gp100_vmm_pgt_pfn
nvkm_vmm_iter()
REF_PTES == func == gp100_vmm_pgt_pfn()
dma_map_page()
Link: https://lore.kernel.org/r/5-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.com
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_vma_walk->last is supposed to be updated after every write to the
pfns, so that it can be returned by hmm_range_fault(). However, this is
not done consistently. Fortunately nothing checks the return code of
hmm_range_fault() for anything other than error.
More importantly last must be set before returning -EBUSY as it is used to
prevent reading an output pfn as an input flags when the loop restarts.
For clarity and simplicity make hmm_range_fault() return 0 or -ERRNO. Only
set last when returning -EBUSY.
Link: https://lore.kernel.org/r/2-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.com
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As i915 won't allocate extra PDP for current default PML4 table,
so for 3-level ppgtt guest, we would hit kernel pointer access
failure on extra PDP pointers. So this trys to bypass that now.
It won't impact real shadow PPGTT setup, so guest context still
works.
This is verified on 4.15 guest kernel with i915.enable_ppgtt=1
to force on old aliasing ppgtt behavior.
Fixes: 4f15665ccb ("drm/i915: Add ppgtt to GVT GEM context")
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200506095918.124913-1-zhenyuw@linux.intel.com
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor
Init value of some display vregs rea inherited from host pregs. When
host display in different status, i.e. all monitors unpluged, different
display configurations, etc., GVT virtual display setup don't consistent
thus may lead to guest driver consider display goes malfunctional.
The added init vreg values are based on PRMs and fixed by calcuation
from current configuration (only PIPE_A) and the virtual EDID.
Fixes: 04d348ae3f ("drm/i915/gvt: vGPU display virtualization")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200508060506.216250-1-colin.xu@intel.com
[Why]
We're sending the drm vblank event a frame too early in the case where
the pageflip happens close to VUPDATE and ends up blocking the signal.
The implementation in DM was previously correct *before* we started
sending vblank events from VSTARTUP unconditionally to handle cases
where HUBP was off, OTG was ON and userspace was still requesting some
DRM planes enabled. As part of that patch series we dropped VUPDATE
since it was deemed close enough to VSTARTUP, but there's a key
difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be
blocked if we're holding the pipe lock.
There was a fix recently to revert the unconditional behavior for the
DCN VSTARTUP vblank event since it was sending the pageflip event on
the wrong frame - once again, due to blocking VUPDATE and having the
address start scanning out two frames later.
The problem with this fix is it didn't update the logic that calls
drm_crtc_handle_vblank(), so the timestamps are totally bogus now.
[How]
Essentially reverts most of the original VSTARTUP series but retains
the behavior to send back events when active planes == 0.
Some refactoring/cleanup was done to not have duplicated code in both
the handlers.
Fixes: 16f17eda8b ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Fixes: 3a2ce8d66a ("drm/amd/display: Disable VUpdate interrupt for DCN hardware")
Fixes: 2b5aed9ac3 ("drm/amd/display: Fix pageflip event race condition for DCN.")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-and-Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.6.x
Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.
Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to set DPM_FLAG_NEVER_SKIP for the legacy ATPX
BOCO case. D3cold and BACO work as expected.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking whether the driver enabled runtime pm
rather than whether the asic supports BOCO or BACO. That said
in general they are equivalent unless the user has disabled
runpm or it has been disabled for a specific asic.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
