The "stream" pointer can't be NULL and it's dereferenced on the line
before so the check doesn't make sense.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"u64 *wptr" points to the the wptr value in write back buffer and
"*wptr = (*wptr) >> 2;" results in the value being overwritten each time
when ->get_wptr() is called.
umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and
decode ring content and it is affected by this issue.
fix and simplify the logic similar as sdma_v4_0_ring_get_wptr().
v2: fix for sdma5.2 as well
Suggested-by: Le Ma <le.ma@amd.com>
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CRC capture doesn't work when the active plane count is 0 since we
currently tie both vblank and pageflip interrupts to active_plane_count
greater than 0.
[How]
The frontend is what generates the vblank interrupts while the backend
is what generates pageflip interrupts. Both have a requirement for
the CRTC to be active, so control the overall interrupt state based
on that instead.
Pageflip interrupts need to be enabled based on active plane count, but
we actually rely on power gating to take care of disabling the interrupt
for us on pipes that can be power gated.
For pipes that can't be power gated it's still fine to leave it enabled
since the interrupt only triggers after the address has been written
to that particular pipe - which we won't be doing without an active
plane.
The issue we had before with this setup was that we couldn't force
the state back on. We were essentially manipulating the refcount
to enable or disable as needed in a two pass approach.
However, there is a function that solves this problem more elegantly:
amdgpu_irq_update() will unconditionally call the set based on what it
thinks the current enablement state is.
This leaves two future TODO items for our IRQ handling:
- Disabling IRQs in commit tail instead of atomic commit
- Mapping the pageflip interrupt to VUPDATE or something that's tied to
the frontend instead of the backend since the mapping to CRTC is not
correct
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When enabling the debugfs for CRC capture we hit assertions caused by
register address and field masks and shifts missing.
[How]
We want these registers programmed, so add in the SRI/SF entries for
this register.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our validation is a known mess with actual validation mixed with
topology configuration. This change makes sure topolgical validation is
completed before any topology changes are made so we do not run into
issues where we merge and split a pipe over the course of a single call.
v2: Squash in compilation fix
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
new calculated dispclk, dppclk are stored in
context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk,
dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth
compute new dispclk, dppclk. dispclk will put in use after
optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are
two places for dppclk be put in use. One location is the same as the
location as dispclk. Another is within update_dchubp_dpp which happens
between pre_bandwidth and optimize_bandwidth. dppclk updated within
update_dchubp_dpp will cause new clock values of dispclk and dppclk not
be in use at the same time. when clocks are decreased, this may cause
dppclk is lower than current configuration and let pipe stuck. for
example, eDP + external dp, change resolution of DP from 1920x1080x144hz
to 1280x960x60hz.
before change: dispclk = 337889 dppclk = 337889
change mode, dcn_validate_bandwidth calculate
dispclk = 143122 dppclk = 143122
update_dchubp_dpp be executed before dispclk be updated,
dispclk = 337889, but dppclk use new value dispclk /2 =
168944. this will cause pipe pstate warning issue.
[How]
between pre_bandwidth and optimize_bandwidth, while dispclk is going to
be decreased, keep dppclk = dispclk
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated
for very connector. Real eDP caps will be overwritten by other external
display. For OLED panel, caps->aux_support is set to 1 for OLED pnael.
after external connected, caps+.aux_support is set to 0. This causes
OLED backlight adjustment not work.
[How]
within update_conector_ext_caps, backlight caps will be updated only for
eDP connector.
Cc: stable@vger.kernel.org
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when ppt disabled, the watermark doesn't get fine tune causing
underflow.
[How]
It is a temporary solution to reduce sr_xxx_time by 3 us when ppt
disable.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In headless systems, if set mode is not called, hardware will not be
powered down on boot, causing HW/SW discrepancies. Powering down
hardware on boot will ensure SW state is accurate.
[HOW]
Set a timer callback on boot for 10 seconds. If set mode is not called
within that time, power down hardware. Otherwise, do not power down.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 0428ab013f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Gives us proper nonblocking support for free, and a pile of other
things. The tilcdc code is simply old enough that it was never
converted over, but was stuck forever with the copypasta from when it
was initially merged.
The riskiest thing with this conversion is maybe that there's an issue
with the vblank handling or vblank event handling, which will upset
the modern commit support in atomic helpers. But from a cursory review
drm_crtc_vblank_on/off is called in the right places, and the event
handling also seems to exist (albeit with much hand-rolling and
probably some races, could perhaps be converted over to
drm_crtc_arm_vblank_event without any real loss).
Motivated by me not having to hand-roll the dma-fence annotations for
this.
v2: Clear out crtc_state->event when we're handling the event, to
avoid upsetting the helpers (reported by Jyri).
v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a
bit like conversion to simple display helpers would work out really
nice.
Tested-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708142050.530240-1-daniel.vetter@ffwll.ch
Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().
During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.
The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
The assignment of metadata overwrote the new display resolution values,
hence we'd miss the size actually changed and wouldn't redefine the
surface. This would then lead to command buffer error when trying to
update the screen target (due to the size mismatch), and result in a
VM with black screen.
Fixes: 504901dbb0 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Cc: stable@vger.kernel.org
So far, max dot clock rate for MST mode rely on physcial
bandwidth limitation. It would caused compatibility issue
if source display resolution exceed MST hub output ability.
For example, source DUT had DP 1.2 output capability.
And MST docking just support HDMI 1.4 spec. When a HDMI 2.0
monitor connected. Source would retrieve EDID from external
and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps
because it did not surpass DP physical bandwidth limitation.
Do modeset to 4k@60fps, source output display data but MST
docking can't output HDMI properly due to this resolution
already over HDMI 1.4 spec.
Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn
instead of available_pbn for bandwidth checks").
Source driver should refer to full_pbn to evaluate sink
output capability. And filter out the resolution surpass
sink output limitation.
Changes since v1:
* Using mgr->base.lock to protect full_pbn.
Changes since v2:
* Add ctx lock.
Changes since v3:
* s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/
intel_dp_mst_mode_clock_exceeds_pbn_bw/
* Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe
down the drm_modeset_acquire_ctx that the probe helpers are using, so
we can safely grab &mgr->base.lock without deadlocking
Changes since v4:
* Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn
check
* Fix the bpp we use in drm_dp_calc_pbn_mode()
* Drop leftover (!mgr) check
* Don't check for if full_pbn is unset. To be clear - it _can_ be unset,
but if it is then it's certainly a bug in DRM or a non-compliant sink
as full_pbn should always be populated by the time we call
->mode_valid_ctx.
We should workaround non-compliant sinks with full_pbn=0, but that
should happen in the DP MST helpers so we can estimate the full_pbn
value as best we can.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-3-lyude@redhat.com
This is just an atomic version of mode_valid, which is intended to be
used for situations where a driver might need to check the atomic state
of objects other than the connector itself. One such example is with
MST, where the maximum possible bandwidth on a connector can change
dynamically irregardless of the display configuration.
Changes since v1:
* Use new drm logging functions
* Make some corrections in the mode_valid_ctx kdoc
* Return error codes or 0 from ->mode_valid_ctx() on fail, and store the
drm_mode_status in an additional function parameter
Changes since v2:
* Don't accidentally assign ret to mode->status on success, or we'll
squash legitimate mode validation results
* Don't forget to assign MODE_OK to status in drm_connector_mode_valid()
if we have no callbacks
* Drop leftover hunk in drm_modes.h around enum drm_mode_status
Changes since v3:
* s/return ret/return 0/ in drm_mode_validate_pipeline()
* Minor cleanup in drm_connector_mode_valid()
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-2-lyude@redhat.com
Preempt-to-busy introduces various fascinating complications in that the
requests may complete as we are unsubmitting them from HW. As they may
then signal after unsubmission, we may find ourselves having to cleanup
the signaling request from within the signaling callback. This causes us
to recurse onto the same i915_request.lock.
However, if the request is already signaled (as it will be before we
enter the signal callbacks), we know we can skip the signaling of that
request during submission, neatly evading the spinlock recursion.
unsubmit(ve.rq0) # timeslice expiration or other preemption
-> virtual_submit_request(ve.rq0)
dma_fence_signal(ve.rq0) # request completed before preemption ack
-> submit_notify(ve.rq1)
-> virtual_submit_request(ve.rq1) # sees that we have completed ve.rq0
-> __i915_request_submit(ve.rq0)
[ 264.210142] BUG: spinlock recursion on CPU#2, sample_multi_tr/2093
[ 264.210150] lock: 0xffff9efd6ac55080, .magic: dead4ead, .owner: sample_multi_tr/2093, .owner_cpu: 2
[ 264.210155] CPU: 2 PID: 2093 Comm: sample_multi_tr Tainted: G U
[ 264.210158] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X212.B01.1909060036 09/06/2019
[ 264.210160] Call Trace:
[ 264.210167] dump_stack+0x98/0xda
[ 264.210174] spin_dump.cold+0x24/0x3c
[ 264.210178] do_raw_spin_lock+0x9a/0xd0
[ 264.210184] _raw_spin_lock_nested+0x6a/0x70
[ 264.210314] __i915_request_submit+0x10a/0x3c0 [i915]
[ 264.210415] virtual_submit_request+0x9b/0x380 [i915]
[ 264.210516] submit_notify+0xaf/0x14c [i915]
[ 264.210602] __i915_sw_fence_complete+0x8a/0x230 [i915]
[ 264.210692] i915_sw_fence_complete+0x2d/0x40 [i915]
[ 264.210762] __dma_i915_sw_fence_wake+0x19/0x30 [i915]
[ 264.210767] dma_fence_signal_locked+0xb1/0x1c0
[ 264.210772] dma_fence_signal+0x29/0x50
[ 264.210871] i915_request_wait+0x5cb/0x830 [i915]
[ 264.210876] ? dma_resv_get_fences_rcu+0x294/0x5d0
[ 264.210974] i915_gem_object_wait_fence+0x2f/0x40 [i915]
[ 264.211084] i915_gem_object_wait+0xce/0x400 [i915]
[ 264.211178] i915_gem_wait_ioctl+0xff/0x290 [i915]
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713141636.29326-1-chris@chris-wilson.co.uk
