The bmc150-accel-i2c.c driver has an "_accel" suffix for the
compatibles of BMC150 and BMI055. This is necessary because BMC150
contains both accelerometer (bosch,bmc150_accel) and magnetometer
(bosch,bmc150_magn) and therefore "bosch,bmc150" would be ambiguous.
However, the binding documentation suggests using "bosch,bmc150".
Add the "_accel" suffix for BMC150 and BMI055 so the binding docs
match what is expected by the driver.
Fixes: 6259551cf1 ("iio: accel: bmc150-accel: Add DT bindings")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201202083551.7753-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Discovery controllers usually don't support smart log page command.
So when we connect to the discovery controller we see this warning:
nvme nvme0: Failed to read smart log (error 24577)
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Introduce a new helper to understand if the controller is a discovery
controller and use this helper to skip nvme_init_hwmon (also use it in
other places that we check if the controller is a discovery controller).
Fixes: 400b6a7b13 ("nvme: Add hardware monitoring support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a bio merges, we can get a request that spans multiple
bios, and the overall request payload size is the sum of
all bios. When we calculate how much we need to send
from the existing bio (and bvec), we did not take into
account the iov_iter byte count cap.
Since multipage bvecs support, bvecs can split in the middle
which means that when we account for the last bvec send we
should also take the iov_iter byte count cap as it might be
lower than the last bvec size.
Reported-by: Hao Wang <pkuwangh@gmail.com>
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Tested-by: Hao Wang <pkuwangh@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We shouldn't call smp_processor_id() in a preemptible
context, but this is advisory at best, so instead
call __smp_processor_id().
Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When setting port traddr to INADDR_ANY, the listening cm_id->device
is NULL. The associate IB device is known only when a connect request
event arrives, so checking T10-PI device capability should be done
at this stage.
Fixes: b09160c399 ("nvmet-rdma: add metadata/T10-PI support")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull HID fixes from Jiri Kosina:
- memory leak fix for Wacom driver (Ping Cheng)
- various trivial small fixes, cleanups and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
HID: Ignore battery for Elan touchscreen on ASUS UX550
HID: logitech-dj: add the G602 receiver
HID: wiimote: remove h from printk format specifier
HID: uclogic: remove h from printk format specifier
HID: sony: select CONFIG_CRC32
HID: sfh: fix address space confusion
HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
HID: wacom: Fix memory leakage caused by kfifo_alloc
[Why]
Find out when we try to disable CRC calculation, crc generation is still
enabled. Main reason is that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cited patch below blocked the TLS TX device offload unless HW_CSUM
is set. This broke devices that use IP_CSUM && IP6_CSUM.
Here we fix it.
Note that the single HW_TLS_TX feature flag indicates support for
both IPv4/6, hence it should still be disabled in case only one of
(IP_CSUM | IPV6_CSUM) is set.
Fixes: ae0b04b238 ("net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reported-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Link: https://lore.kernel.org/r/20210114151215.7061-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make maintainers' lives easier we're trying to nudge people
towards CCing all the relevant folks on patches, in an attempt
to improve review rate. We have a check in patchwork which validates
the CC list against get_maintainers.pl. It's a little awkward, however,
to force people to CC maintainers who we haven't seen on the mailing
list for years. This series removes from maintainers folks who didn't
provide any tag (incl. authoring a patch) in the last 5 years.
To ensure reasonable signal to noise ratio we only considered
MAINTAINERS entries which had more than 100 patches fall under
them in that time period.
All this is purely a process-greasing exercise, I hope nobody
sees this series as an affront. Most folks are moved to CREDITS,
a couple entries are simply removed.
The following inactive maintainers are kept, because they indicated
the intention to come back in the near future:
- Veaceslav Falico (bonding)
- Christian Benvenuti (Cisco drivers)
- Felix Fietkau (mtk-eth)
- Mirko Linder (skge/sky2)
Patches in this series contain report from a script which did
the analysis. Big thanks to Jonathan Corbet for help and writing
the script (although I feel like I used it differently than Jon
may have intended ;)). The output format is thus:
Subsystem $name
Changes $reviewed / $total ($percent%) // how many changes to the subsystem had at least one ack/review
Last activity: $date_of_most_recent_patch
$maintainer/reviewer1:
Author $last_commit_authored_by_the_person $how_many_in_5yrs
Committer $last_committed $how_many
Tags $last_tag_like_review_signoff_etc $how_many
$maintainer/reviewer2:
Author $last_commit_authored_by_the_person $how_many_in_5yrs
Committer $last_committed $how_many
Tags $last_tag_like_review_signoff_etc $how_many
Top reviewers: // Top 3 reviewers (who are not listed in MAINTAINERS)
[$count_of_reviews_and_acks]: $email
INACTIVE MAINTAINER $name // maintainer / reviewer who has done nothing in last 5yrs
v2:
- keep Felix and Mirko
Link: https://lore.kernel.org/r/20210114014912.2519931-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As far as I can tell we haven't heard from Gerrit for roughly
5 years now. DCCP patch would really benefit from some review.
Gerrit was the last maintainer so mark this entry as orphaned.
Subsystem DCCP PROTOCOL
Changes 38 / 166 (22%)
(No activity)
Top reviewers:
[6]: kstewart@linuxfoundation.org
[6]: allison@lohutok.net
[5]: edumazet@google.com
INACTIVE MAINTAINER Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both virtio net and napi_get_frags() allocate skbs
with a very small skb->head
While using page fragments instead of a kmalloc backed skb->head might give
a small performance improvement in some cases, there is a huge risk of
under estimating memory usage.
For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations
per page (order-3 page in x86), or even 64 on PowerPC
We have been tracking OOM issues on GKE hosts hitting tcp_mem limits
but consuming far more memory for TCP buffers than instructed in tcp_mem[2]
Even if we force napi_alloc_skb() to only use order-0 pages, the issue
would still be there on arches with PAGE_SIZE >= 32768
This patch makes sure that small skb head are kmalloc backed, so that
other objects in the slab page can be reused instead of being held as long
as skbs are sitting in socket queues.
Note that we might in the future use the sk_buff napi cache,
instead of going through a more expensive __alloc_skb()
Another idea would be to use separate page sizes depending
on the allocated length (to never have more than 4 frags per page)
I would like to thank Greg Thelen for his precious help on this matter,
analysing crash dumps is always a time consuming task.
Fixes: fd11a83dd3 ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a
certain limit. As a result, a taprio qdisc configuration with a small
base time (for example when treating the base time as a simple phase
offset) is not applied by the hardware and silently ignored.
This was observed on an NXP i.MX8MPlus device, but likely affects all
TSN-variants of the MAC.
Fix the issue by making sure the base time is in the future, pushing it by
an integer amount of cycle times if needed. (a similar check is already
done in several other taprio implementations, see for example
drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or
drivers/net/dsa/sja1105/sja1105_ptp.h#L39).
Fixes: b60189e039 ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP
i.MX8MPlus device, the effective cycle time differed from the requested one
by N*96ns, with N number of entries in the Qbv Gate Control List. This is
because the driver was adding a 96ns margin to each interval of the GCL,
apparently to account for the IPG. The problem was observed on NXP
i.MX8MPlus devices but likely affected all devices relying on the same
configuration callback (dwmac 4.00, 4.10, 5.10 variants).
Fix the issue by removing the margins, and simply setup the MAC with the
provided cycle time value. This is the behavior expected by the user-space
API, as altering the Qbv schedule timings would break standards conformance.
This is also the behavior of several other Ethernet MAC implementations
supporting taprio, including the dwxgmac variant of stmmac.
Fixes: 504723af0d ("net: stmmac: Add basic EST support for GMAC5+")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A function has a different name between their prototype
and its kernel-doc markup:
../net/tipc/link.c:2551: warning: expecting prototype for link_reset_stats(). Prototype was for tipc_link_reset_stats() instead
../net/tipc/node.c:1678: warning: expecting prototype for is the general link level function for message sending(). Prototype was for tipc_node_xmit() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$',
make it so and fix the following two make dtbs_check warnings:
arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Fixes: ac68793f49 ("ARM: dts: stm32: Add DHCOM based PicoITX board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
rounddown_pow_of_two() is undefined when the input is 0. Therefore we need
to avoid it in ib_umem_find_best_pgsz and return 0. Otherwise, it could
result in not rejecting an invalid page size which eventually causes a
kernel oops due to the logical inconsistency.
Fixes: 3361c29e92 ("RDMA/umem: Use simpler logic for ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20210113121703.559778-2-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Clang warns in both mt7615 and mt7915:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:271:9: warning: implicit
conversion from enumeration type 'enum mt76_mcuq_id' to different
enumeration type 'enum mt76_txq_id' [-Wenum-conversion]
txq = MT_MCUQ_FWDL;
~ ^~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:278:9: warning: implicit
conversion from enumeration type 'enum mt76_mcuq_id' to different
enumeration type 'enum mt76_txq_id' [-Wenum-conversion]
txq = MT_MCUQ_WA;
~ ^~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:282:9: warning: implicit
conversion from enumeration type 'enum mt76_mcuq_id' to different
enumeration type 'enum mt76_txq_id' [-Wenum-conversion]
txq = MT_MCUQ_WM;
~ ^~~~~~~~~~
3 warnings generated.
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:238:9: warning: implicit
conversion from enumeration type 'enum mt76_mcuq_id' to different
enumeration type 'enum mt76_txq_id' [-Wenum-conversion]
qid = MT_MCUQ_WM;
~ ^~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:240:9: warning: implicit
conversion from enumeration type 'enum mt76_mcuq_id' to different
enumeration type 'enum mt76_txq_id' [-Wenum-conversion]
qid = MT_MCUQ_FWDL;
~ ^~~~~~~~~~~~
2 warnings generated.
Use the proper type for the queue ID variables to fix these warnings.
Additionally, rename the txq variable in mt7915_mcu_send_message to be
more neutral like mt7615_mcu_send_message.
Fixes: e637763b60 ("mt76: move mcu queues to mt76_dev q_mcu array")
Link: https://github.com/ClangBuiltLinux/linux/issues/1229
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201229211548.1348077-1-natechancellor@gmail.com
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
The initial change breaking the logic is
commit 3d1f08b032 ("mtd: spinand: Use the external ECC engine logic")
It inadvertently dropped proper OOB support while doing something
else.
Shortly later, half of it got re-integrated by
commit 868cbe2a6d ("mtd: spinand: Fix OOB read")
(pointing by the way to a more early change which had nothing to do
with the issue). Problem is, this commit failed to revert the faulty
change entirely and missed the logic handling MTD_OPS_AUTO_OOB
requests.
Let's fix this mess by re-inserting the missing part now.
Fixes: 868cbe2a6d ("mtd: spinand: Fix OOB read")
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210107083813.24283-1-miquel.raynal@bootlin.com
The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its
product ID to the table so we can get battery monitoring support.
(The hid-logitech-hidpp driver already recognizes it when connected via
a Unifying Receiver.)
[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
