In bio_endio if bio doesn't have bi_end_io (should be an error case),
we set bio to NULL and continue silently without freeing the bio. It
would be good to have a WARN and free the bio to avoid memory leak.
Signed-off-by: Muthukumar Ratty <muthur@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds four new fields to directory leaf blocks.
The intent is not to use them in the kernel itself, although
perhaps we may be able to use them as hints at some later date,
but instead to provide more information for debug/fsck use.
One new field adds a pointer to the inode to which the leaf
belongs. This can be useful if the pointer to the leaf block
has become corrupt, as it will allow us to know which inode
this block should be associated with. This field is set when
the leaf is created and never changed over its lifetime.
The second field is a "distance from the hash table" field.
The meaning is as follows:
0 = An old leaf in which this value has not been set
1 = This leaf is pointed to directly from the hash table
2+ = This leaf is part of a chain, pointed to by another leaf
block, the value gives the position in the chain.
The third and fourth fields combine to give a time stamp of
the most recent directory insertion or deletion from this
leaf block. The time stamp is not updated when a new leaf
block is chained from the current one. The code is currently
written such that the timestamp on the dir inode will match
that of the leaf block for the most recent insertion/deletion.
For backwards compatibility, any of these new fields which is
zero should be considered to be "unknown".
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For most cases, only a single new block is needed when we reach
the point of converting from stuffed to exhash directory. The
exception being when the file name is so long that it will not
fit within the new leaf block.
So this patch adds a simple test for that situation so that we
do not need to request the full reservation size in this case.
Potentially we could calculate more accurately the value to use
in other cases too, but that is much more complicated to do and
it is doubtful that the benefit would outweigh the extra cost
in code complexity.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Previously during SSR and GC, the maximum number of retrials to find a victim
segment was hard-coded by MAX_VICTIM_SEARCH, 4096 by default.
This number makes an effect on IO locality, when SSR mode is activated, which
results in performance fluctuation on some low-end devices.
If max_victim_search = 4, the victim will be searched like below.
("D" represents a dirty segment, and "*" indicates a selected victim segment.)
D1 D2 D3 D4 D5 D6 D7 D8 D9
[ * ]
[ * ]
[ * ]
[ ....]
This patch adds a sysfs entry to control the number dynamically through:
/sys/fs/f2fs/$dev/max_victim_search
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When considering a bunch of data writes with very frequent fsync calls, we
are able to think the following performance regression.
N: Node IO, D: Data IO, IO scheduler: cfq
Issue pending IOs
D1 D2 D3 D4
D1 D2 D3 D4 N1
D2 D3 D4 N1 N2
N1 D3 D4 N2 D1
--> N1 can be selected by cfq becase of the same priority of N and D.
Then D3 and D4 would be delayed, resuling in performance degradation.
So, when processing the fsync call, it'd better give higher priority to data IOs
than node IOs by assigning WRITE and WRITE_SYNC respectively.
This patch improves the random wirte performance with frequent fsync calls by up
to 10%.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As a temporary fix, nfsd was breaking all leases on unlink, link,
rename, and setattr.
Now that we can distinguish between leases and delegations, we can be
nicer and break only the delegations, and not bother lease-holders with
operations they don't care about.
And we get to delete some code while we're at it.
Note that in the presence of delegations the vfs calls here all return
-EWOULDBLOCK instead of blocking, so nfsd threads will not get stuck
waiting for delegation returns.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is harmless, since ext4_walk_page_buffers only passes the handle
onto the callback function, and in this call site the function in
question, bput_one(), doesn't actually use the handle. But there's no
point passing in an invalid handle, and it creates a Coverity warning,
so let's just clean it up.
Addresses-Coverity-Id: #1091168
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A missing cast means that when we are truncating a file which is less
than 60 bytes, we don't clear the correct area of memory, and in fact
we can end up truncating the next inode in the inode table, or worse
yet, some other kernel data structure.
Addresses-Coverity-Id: #751987
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
This patch fixed several typo in printk from various
part of kernel source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch calls get_write_access in function gfs2_setattr_chown,
which merely increases inode->i_writecount for the duration of the
function. That will ensure that any file closes won't delete the
inode's multi-block reservation while the function is running.
It also ensures that a multi-block reservation exists when needed
for quota change operations during the chown.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If failed after calling alloc_session but before init_session, nfsd will call __free_session to
free se_slots in session. But, session->se_fchannel.maxreqs is not initialized (value is zero).
So that, the memory malloced for slots will be lost in free_session_slots for maxreqs is zero.
This path sets the information for channel in alloc_session after mallocing slots succeed,
instead in init_session.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The VFS allows an anonymous temporary file to be named at a later
time via a linkat() syscall. The inodes for O_TMPFILE files are
are marked with a special flag I_LINKABLE and have a zero link count.
To support this in XFS, xfs_link() detects if this flag I_LINKABLE
is set and behaves appropriately when detected. So in this case,
its transaciton reservation takes into account the additional
overhead of removing the inode from the unlinked list. Then the
inode is removed from the unlinked list and the directory entry
is added. Finally its link count is bumped accordingly.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add two functions xfs_create_tmpfile() and xfs_vn_tmpfile()
to support O_TMPFILE file creation.
In contrast to xfs_create(), xfs_create_tmpfile() has a different
log reservation to the regular file creation because there is no
directory modification, and doesn't check if an entry can be added
to the directory, but the reservation quotas is required appropriately,
and finally its inode is added to the unlinked list.
xfs_vn_tmpfile() add one O_TMPFILE method to VFS interface and directly
invoke xfs_create_tmpfile().
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
It will be reused by the O_TMPFILE creation function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:
<snip>
XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c
<snip>
Call Trace:
[<ffffffff816f0042>] dump_stack+0x45/0x56
[<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs]
[<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460
[<ffffffff81097230>] ? wake_up_state+0x20/0x20
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs]
[<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs]
[<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs]
[<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs]
[<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs]
[<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs]
[<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs]
[<ffffffff811df9b2>] generic_setxattr+0x62/0x80
[<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0
[<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10
[<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0
[<ffffffff811e054e>] setxattr+0x12e/0x1c0
[<ffffffff811c6e82>] ? final_putname+0x22/0x50
[<ffffffff811c708b>] ? putname+0x2b/0x40
[<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90
[<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0
[<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0
[<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0
[<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f
Tests:
setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile
This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The function has a bit non-standard (for ext4) error recovery in that it
used a mix of 'out' labels and testing for 'handle' being NULL. There
isn't a good reason for that in the function so clean it up a bit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Similarly as other ->write_begin functions in ext4, also
ext4_da_write_inline_data_begin() should retry allocation if the
conversion failed because of ENOSPC. This avoids returning ENOSPC
prematurely because of uncommitted block deletions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After applied this commit (d23142c6), ext4 has supported punch hole for
a file system with bigalloc feature. But we forgot to enable it. This
commit fixes it.
Cc: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit f5a44db5d2 introduced a regression on filesystems created with
the bigalloc feature (cluster size > blocksize). It causes xfstests
generic/006 and /013 to fail with an unexpected JBD2 failure and
transaction abort that leaves the test file system in a read only state.
Other xfstests run on bigalloc file systems are likely to fail as well.
The cause is the accidental use of a cluster mask where a cluster
offset was needed in ext4_ext_map_blocks().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Without CONFIG_NFSD_V3, compile will get warning as,
fs/nfsd/nfssvc.c: In function 'nfsd_svc':
>> fs/nfsd/nfssvc.c:246:60: warning: array subscript is above array bounds [-Warray-bounds]
return (nfsd_versions[2] != NULL) || (nfsd_versions[3] != NULL);
^
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we look to see if there is enough space to add a dir
entry without allocation, we have then been repeating the
same search later when we do the actual insertion. This
patch caches the details of the location in the gfs2_diradd
structure, so that we do not have to repeat the search.
This will provide a performance improvement which will be
greater as the size of the directory increases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There are three cases where we need to calculate the number of
blocks to reserve in a transaction involving linking an inode
into a directory. The one in rename is a bit more complicated,
but the basis of it is the same as for link and create. So it
makes sense to move this calculation into a single function
rather than repeating it three times.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The intent is that this structure will hold the information
required when adding entries to a directory (linking). To
start with, it will contain only the number of blocks which
are required to link the new entry into the directory. The
current calculation returns either 0 or the maximim number of
blocks that can ever be requested by such a transaction.
The intent is that in a later patch, we can update the dir
code to calculate this value more accurately. In addition
further patches will also add further fields to the new
structure to increase its utility.
In addition this patch fixes a bug where the link used during
inode creation was adding requesting too many blocks in
some cases. This is harmless unless the fs is close to being
full.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is a case which could read inline page data not from first page.
1. write inline data
2. lseek to offset 4096
3. read 4096 bytes from offset 4096
(read_inline_data read inline data page to non-first page,
And previously VFS has add this page to page cache)
4. ftruncate offset 8192
5. read 4096 bytes from offset 4096
(we meet this updated page with inline data in cache)
So we should leave this page with inited data and uptodate flag
for this case.
Change log from v1:
o fix a deadlock bug
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o reduce unneeded memset in __f2fs_convert_inline_data
>From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001
From: Chao Yu <chao2.yu@samsung.com>
Date: Mon, 30 Dec 2013 09:21:33 +0800
Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read
inline data
We left uninitialized data in the tail of page when we read an inline data
page. So let's initialize left part of the page excluding inline data region.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The get_dnode_of_data nullifies inode and node page when error is occurred.
There are two cases that passes inode page into get_dnode_of_data().
1. make_empty_dir()
-> get_new_data_page()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
2. f2fs_convert_inline_data()
-> __f2fs_convert_inline_data()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
This patch adds correct error handling codes when get_dnode_of_data() returns
an error.
At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block
returns an error.
So, the rule of f2fs_reserve_block() is to nullify inode page when there is any
error internally.
Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode()
appropriately if they got an error since successful f2fs_reserve_block().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds the number of inline_data files into the status information.
Note that the number is reset whenever the filesystem is newly mounted.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu.
This patch refactors f2fs_convert_inline_data to check a couple of conditions
internally for deciding whether it needs to convert inline_data or not.
So, the new f2fs_convert_inline_data initially checks:
1) f2fs_has_inline_data(), and
2) the data size to be changed.
If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA,
then we don't need to convert the inline_data with data allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs_write_begin(), if f2fs_conver_inline_data() returns an error like
-ENOSPC, f2fs should call f2fs_put_page().
Otherwise, it is remained as a locked page, resulting in the following bug.
[<ffffffff8114657e>] sleep_on_page+0xe/0x20
[<ffffffff81146567>] __lock_page+0x67/0x70
[<ffffffff81157d08>] truncate_inode_pages_range+0x368/0x5d0
[<ffffffff81157ff5>] truncate_inode_pages+0x15/0x20
[<ffffffff8115804b>] truncate_pagecache+0x4b/0x70
[<ffffffff81158082>] truncate_setsize+0x12/0x20
[<ffffffffa02a1842>] f2fs_setattr+0x72/0x270 [f2fs]
[<ffffffff811cdae3>] notify_change+0x213/0x400
[<ffffffff811ab376>] do_truncate+0x66/0xa0
[<ffffffff811ab541>] vfs_truncate+0x191/0x1b0
[<ffffffff811ab5bc>] do_sys_truncate+0x5c/0xa0
[<ffffffff811ab78e>] SyS_truncate+0xe/0x10
[<ffffffff81756052>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the punch_hole(), let's convert inline_data all the time for simplicity and
to avoid potential deadlock conditions.
It is pretty much not a big deal to do this.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
A fileid in NFS is a uint64. There are some occurrences where dprintk()
outputs a signed fileid. This leads to confusion and more difficult to
read debugging (negative fileids matching positive inode numbers).
Signed-off-by: Niels de Vos <ndevos@redhat.com>
CC: Santosh Pradhan <spradhan@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The correct way to check on IPV6_ADDR_SCOPE_LINKLOCAL is to check with
the ipv6_addr_src_scope function.
Currently this can't be work, because ipv6_addr_scope returns a int with
a mask of IPV6_ADDR_SCOPE_MASK (0x00f0U) and IPV6_ADDR_SCOPE_LINKLOCAL
is 0x02. So the condition is always false.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When starting without nfsv2 and nfsv3, nfsd does not need to start
lockd (and certainly doesn't need to fail because lockd failed to
register with the portmapper).
Reported-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 clients can contact port 2049 directly instead of needing the
portmapper.
Therefore a failure to register to the portmapper when starting an
NFSv4-only server isn't really a problem.
But Gareth Williams reports that an attempt to start an NFSv4-only
server without starting portmap fails:
#rpc.nfsd -N 2 -N 3
rpc.nfsd: writing fd to kernel failed: errno 111 (Connection refused)
rpc.nfsd: unable to set any sockets for nfsd
Add a flag to svc_version to tell the rpc layer it can safely ignore an
rpcbind failure in the NFSv4-only case.
Reported-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
the length for backchannel checking should be multiplied by sizeof(__be32).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
check_forechannel_attrs gets drc memory, so nfsd must put it when
check_backchannel_attrs fails.
After many requests with bad back channel attrs, nfsd will deny any
client's CREATE_SESSION forever.
A new test case named CSESS29 for pynfs will send in another mail.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit 5b6feee960 forgot
recording the back channel attrs in nfsd4_session.
nfsd just check the back channel attars by check_backchannel_attrs,
but do not record it in nfsd4_session in the latest kernel.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
