Fix a few type issues that cause compile warnings on 64 bit ARM
compiler. The change should not affect 32bit platforms.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We only use read_irqenable() to flush posted write. Instead of having a
separate function for this, do the flush implicitly in write_irqenable().
Thus we can remove read_irqenable().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
At the moment we have ovl_set_channel_out() to configure the output
channel of an overlay. It makes sense to have this configuration as part
of the rest of overlay configuration, and in DSS6+ we need the output
channel when doing the other overlay configuration.
This patch adds a 'channel' parameter to ovl_setup(), so that all
overlay configuration is done via the same function, and removes the
ovl_set_channel_out().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We have been using DRM_MODE_CONNECTOR_Unknown for many of our outputs
because there has not been a proper connector type for them.
We now have connector type for DPI so let's take it into use. At the
same time, add better connector types for the remaining outputs too.
This patch sets the following outputs to use the following connector
types:
DPI -> DPI
DBI -> DPI (MIPI DBI is very similar to DPI at the bus level)
SDI -> LVDS (SDI, TI Flatlink 3G, is a type of LVDS)
VENC -> SVIDEO or Composite
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The SDI platform driver was used for non-DT platforms only. On DT
platforms the SDI port is handled manually. As OMAP display devices are
now instantiated from DT only, remove the SDI platform driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DPI platform driver was used for non-DT platforms only. On DT
platforms the DPI port is handled manually. As OMAP display devices are
now instantiated from DT only, remove the DPI platform driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm exposes the SoC version to userspace through an integer that
contains the OMAP model (e.g. 0x3430 for the OMAP3430). This is an
unfortunate choice of userspace API as it's both conceptually wrong
(userspace nowadays should use /sys/bus/soc/ for that purpose) and
inaccurate as many models with different features are reported with the
same version number.
The only known user of this API is the xomap X11 driver. Even if it has
been deprecated for some time we can't drop the kernel API yet. We can,
however, infer the version number from the SoC family to avoid the need
to pass the version number through platform data.
Do this, which makes the omapdrm platform data not needed anymore, and
ready to be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The default display name is both unused and never set by platform data.
Remove default display name module parameter, platform data field and
runtime infrastructure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The devm_ioremap_resource() call can handle being given a NULL resource,
and prints an error message when mapping fails. Switch the remaining
devm_ioremap() calls to devm_ioremap_resource() and remove all
extraneous resource NULL checks and error messages printed manually by
the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To ensure that neither the GEM object nor the DRM device goes away while
a GEM object exported through dma-buf is still accessible, references
must be taken to both the GEM object and the DRM device at export time.
The dma-buf release handler already releases the GEM object, but the
export handler doesn't take a corresponding reference, which results in
a refcount underflow.
Fix this by replacing the custom implementation by
drm_gem_dmabuf_export() and drm_gem_dmabuf_release() that handle
reference counting for us.
Fixes: 6ad11bc3a0 ("staging: drm/omap: dmabuf/prime support")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The display engine only reads from memory, there's no need to use
bidirectional DMA mappings. Use DMA_TO_DEVICE instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Both coherent (uncached) and non-coherent (cached) buffers can have
their pages mapped to the device through the DMA mapping API. Make sure
to unmap any mapped page when freeing a buffer, regardless of its type.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The is_cache_coherent() function currently returns true when the mapping
is not cache-coherent. This isn't a bug as such as the callers interpret
cache-coherent as meaning that the driver has to handle the coherency
manually, but it is nonetheless very confusing. Fix it and add a bit
more documentation to explain how cached buffers are handled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_gem_cpu_sync() function operates at a page level, while the
omap_gem_dma_sync() function operates at a buffer level. Rename them to
omap_gem_cpu_sync_page() and omap_gem_dma_sync_buffer() respectively to
avoid confusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The fields, variables and functions deal with DMA addresses, name them
accordingly. The omap_gem_get_paddr() and omap_gem_put_paddr() will be
addressed differently separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is always called with the remap argument set to true.
Hardcode that behaviour and remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Create a standard zpos property for every plane as an alias to the
omapdrm-specific zorder property. Unlike the zorder property that has to
be instantiated for both planes and CRTCs due to backward compatibility,
the zpos property is only instantiated for planes. When userspace will
have switched to the zpos property the zorder property will be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The custom plane state only encapsulates the standard plane state with
adding any custom field. Remove it and use the atomic plane helpers
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM core implements a standard "zpos" property to control planes
ordering. The omapdrm driver implements a similar property named
"zorder". Although we can't switch to DRM core handling of the "zpos"
property for backward compatibility reasons, we can store the zorder
value in the drm_plane_state zpos field, saving us from adding a custom
field to the plane state.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm driver uses a custom API to synchronize with the SGX GPU.
This is unusable as such in the mainline kernel as the API is only
partially implemented and requires additional out-of-tree patches.
Furthermore, as no SGX driver is available in the mainline kernel, the
API can't be considered as a stable mainline API.
Now that the driver supports synchronization through fences, remove
legacy buffer synchronization support. The two userspace ioctls are
turned into no-ops to avoid breaking userspace and will be removed in
the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver currently handles vblank events only when updating planes on
an already enabled CRTC. The atomic update API however allows requesting
an event when enabling or disabling a CRTC. This currently leads to
event objects being leaked in the kernel and to events not being sent
out. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DP sink specific quirks
* tag 'topic/dp-quirks-2017-05-31' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
Pull gcc-plugin prepwork from Kees Cook:
"Use designated initializers for mtk-vcodec, powerplay, amdgpu, and
sgi-xp. Use ERR_CAST() to avoid cross-structure cast in ocf2, ntfs,
and NFS.
Christoph Hellwig recommended that I send these fixes now, rather than
waiting for the v4.13 merge window. These are all initializer and cast
fixes needed for the future randstruct plugin that haven't been picked
up by the respective maintainers"
* tag 'gcc-plugins-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mtk-vcodec: Use designated initializers
drm/amd/powerplay: Use designated initializers
drm/amdgpu: Use designated initializers
sgi-xp: Use designated initializers
ocfs2: Use ERR_CAST() to avoid cross-structure cast
ntfs: Use ERR_CAST() to avoid cross-structure cast
NFS: Use ERR_CAST() to avoid cross-structure cast
We are using PSP to resume firmware after suspend, and it is
resumed at where it got suspended, so we'd better save the
the context.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In review, Christian would like to keep the logic
inside amdgpu_vm.c with a cost of slightly slower.
The loop is still optimized out with this patch.
v2: remove the if statement. Now it is not slower.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atm disabling either DP or eDP outputs can generate a spurious short
pulse interrupt. The reason is that after disabling the port the source
will stop sending a valid stream data, while the sink expects either a
valid stream or the idle pattern. Since neither of this is sent the sink
assumes (after an arbitrary delay) that the link is lost and requests
for link retraining with a short pulse.
The spurious pulse is a real problem at least for eDP panels with long
power-off / power-cycle delays: as part of disabling the output we
disable the panel power. The subsequent spurious short pulse handling
will have to turn the power back on, which means the driver has to do a
redundant wait for the power-off and power-cycle delays. During system
suspend this leads to an unnecessary delay up to ~1s on systems with
such panels as reported by Rui.
To fix this put the sink to DPMS D3 state before turning off the port.
According to the DP spec in this state the sink should not request
retraining. This is also what we do already on pre-ddi platforms.
As an alternative I also tried configuring the port to send idle pattern
- which is against BSPec - and leave the port in normal mode before
turning off the port. Neither of these resolved the problem.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496250335-7627-1-git-send-email-imre.deak@intel.com
We accidentally return ERR_PTR(0) which is NULL. The caller is not
expecting that and it leads to an Oops.
Fixes: dd59239a98 ("amdkfd: init aperture once per process")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The A10s has a slightly different display pipeline than the A13, with an
HDMI controller.
Add a compatible for it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.
That HDMI controller is able to do audio and CEC, but those have been left
out for now.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
