We have a clock controller for the Gemini SoC, so make use of the
driver and add clocks to the peripherals. Remove the hard-coded
frequency from the UART and add switch the timer compatible to the
generic that uses the clock framework for clock speed look-up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds the Gemini reset controller to the Gemini SoC
DTSI file and also adds the reset references to all existing
blocks already in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the file arch/x86/mm/pat.c, there's a '__pat_enabled' variable. The
variable is set to 1 by default and the function pat_init() sets
__pat_enabled to 0 if the CPU doesn't support PAT.
However, on AMD K6-3 CPUs, the processor initialization code never calls
pat_init() and so __pat_enabled stays 1 and the function pat_enabled()
returns true, even though the K6-3 CPU doesn't support PAT.
The result of this bug is that a kernel warning is produced when attempting to
start the Xserver and the Xserver doesn't start (fork() returns ENOMEM).
Another symptom of this bug is that the framebuffer driver doesn't set the
K6-3 MTRR registers:
x86/PAT: Xorg:3891 map pfn expected mapping type uncached-minus for [mem 0xe4000000-0xe5ffffff], got write-combining
------------[ cut here ]------------
WARNING: CPU: 0 PID: 3891 at arch/x86/mm/pat.c:1020 untrack_pfn+0x5c/0x9f
...
x86/PAT: Xorg:3891 map pfn expected mapping type uncached-minus for [mem 0xe4000000-0xe5ffffff], got write-combining
To fix the bug change pat_enabled() so that it returns true only if PAT
initialization was actually done.
Also, I changed boot_cpu_has(X86_FEATURE_PAT) to
this_cpu_has(X86_FEATURE_PAT) in pat_ap_init(), so that we check the PAT
feature on the processor that is being initialized.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1704181501450.26399@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have been a little loose with our intermediate VMCR representation
where we had a 'ctlr' field, but we failed to differentiate between the
GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping
the wrong bits into the individual fields of the ICH_VMCR_EL2 when
emulating a GICv2 on a GICv3 system.
Fix this by using explicit fields for the VMCR bits instead.
Cc: Eric Auger <eric.auger@redhat.com>
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Jones and Steven Rostedt reported unwinder warnings like the
following:
WARNING: kernel stack frame pointer at ffff8800bda0ff30 in sshd:1090 has bad value 000055b32abf1fa8
In both cases, the unwinder was attempting to unwind from an ftrace
handler into entry code. The callchain was something like:
syscall entry code
C function
ftrace handler
save_stack_trace()
The problem is that the unwinder's end-of-stack logic gets confused by
the way ftrace lays out the stack frame (with fentry enabled).
I was able to recreate this warning with:
echo call_usermodehelper_exec_async:stacktrace > /sys/kernel/debug/tracing/set_ftrace_filter
(exit login session)
I considered fixing this by changing the ftrace code to rewrite the
stack to make the unwinder happy. But that seemed too intrusive after I
implemented it. Instead, just add another check to the unwinder's
end-of-stack logic to detect this special case.
Side note: We could probably get rid of these end-of-stack checks by
encoding the frame pointer for syscall entry just like we do for
interrupt entry. That would be simpler, but it would also be a lot more
intrusive since it would slightly affect the performance of every
syscall.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: live-patching@vger.kernel.org
Fixes: c32c47c68a ("x86/unwind: Warn on bad frame pointer")
Link: http://lkml.kernel.org/r/671ba22fbc0156b8f7e0cfa5ab2a795e08bc37e1.1495553739.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Petr Mladek reported the following warning when loading the livepatch
sample module:
WARNING: CPU: 1 PID: 3699 at arch/x86/kernel/stacktrace.c:132 save_stack_trace_tsk_reliable+0x133/0x1a0
...
Call Trace:
__schedule+0x273/0x820
schedule+0x36/0x80
kthreadd+0x305/0x310
? kthread_create_on_cpu+0x80/0x80
? icmp_echo.part.32+0x50/0x50
ret_from_fork+0x2c/0x40
That warning means the end of the stack is no longer recognized as such
for newly forked tasks. The problem was introduced with the following
commit:
ff3f7e2475 ("x86/entry: Fix the end of the stack for newly forked tasks")
... which was completely misguided. It only partially fixed the
reported issue, and it introduced another bug in the process. None of
the other entry code saves the frame pointer before calling into C code,
so it doesn't make sense for ret_from_fork to do so either.
Contrary to what I originally thought, the original issue wasn't related
to newly forked tasks. It was actually related to ftrace. When entry
code calls into a function which then calls into an ftrace handler, the
stack frame looks different than normal.
The original issue will be fixed in the unwinder, in a subsequent patch.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: live-patching@vger.kernel.org
Fixes: ff3f7e2475 ("x86/entry: Fix the end of the stack for newly forked tasks")
Link: http://lkml.kernel.org/r/f350760f7e82f0750c8d1dd093456eb212751caa.1495553739.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We cannot use bits from configuration registers as API between
platforms and driver like this, abstract it out to two enums
and mimic the stuff passed as device tree data.
This is done to make it possible for the driver to generate the
ccfg word on-the-fly so we can support more PL08x derivatives.
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Multiple line formats are not preferred as the second and
subsequent lines may not have timestamps.
Lacking timestamps makes reading the output a bit difficult.
This also makes arm/arm64 output more similar.
Previous:
[ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
sp : ecdd7e20 ip : 00000000 fp : ffffffff
New:
[ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
[ 1514.105316] sp : ecdd7e20 ip : 00000000 fp : ffffffff
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit 9da5ac236d ("ARM: soft-reboot into same mode that we entered
the kernel") added support to enter the new kernel in the same processor
mode as the previous one when we soft-reboot from one kernel into
another by pass a flag to cpu_reset() so it knows what to do exactly.
However it missed to make similar changes in MCPM code. Due to the
missing flag, the CPUs enter HYP mode which is not supported with MCPM.
MCPM works only in secure mode as it manages CCI.
This patch aligns the cpu_reset call in MCPM with other changes in the
above mentioned commit by making phys_reset_t to follow the prototype
of cpu_reset().
Fixes: 9da5ac236d ("ARM: soft-reboot into same mode that we entered the kernel")
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The description of the connection between the dwmmc (SDIO) controller and
the Wifi chip, which is attached to the SDIO bus is wrong. Currently the
SDIO card can't be detected and thus the Wifi doesn't work.
Let's fix this by assigning the correct vmmc supply, which is the always on
regulator VDD_3V3 and remove the WLAN enable regulator altogether. Then to
properly deal with the power on/off sequence, add a mmc-pwrseq node to
describe the resources needed to detect the SDIO card.
Except for the WLAN enable GPIO and its corresponding assert/de-assert
delays, the mmc-pwrseq node also contains a handle to a clock provided by
the hi655x pmic. This clock is also needed to be able to turn on the WiFi
chip.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Move the board specific descriptions for the dwmmc nodes in the hi6220 SoC
dtsi, into the hikey dts as it's there these belongs.
While changing this, let's take the opportunity to drop the use of the
"ti,non-removable" binding for one of the dwmmc device nodes, as it's not a
valid binding and not used. Drop also the unnecessary use of "num-slots =
<0x1>" for all of the dwmmc nodes, as there is no need to set this since
when default number of slots is one.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add these regulators to better describe the HW, but also because those is
needed in following changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The regulator is a part of the hikey board, therefore let's move it from
the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the
regulator according to the datasheet (5V_HUB) to better reflect the HW.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The hi655x PMIC provides the regulators but also a clock. The latter is
missing so let's add it. This clock is used by WiFi/Bluetooth chip, but
that connection is done in a separate change on top of this one.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
We don't need to stop a specific VCPU when changing the active state,
because private IRQs can only be modified by a running VCPU for the
VCPU itself and it is therefore already stopped.
However, it is also possible for two VCPUs to be modifying the active
state of SPIs at the same time, which can cause the thread being stuck
in the loop that checks other VCPU threads for a potentially very long
time, or to modify the active state of a running VCPU. Fix this by
serializing all accesses to setting and clearing the active state of
interrupts using the KVM mutex.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make full use of 32 regions and increase IORESOURCE_MEM_64
so that we could have more chance to support PCIe switch with
more endpoints attached to our RC.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to support multiple hierarchy of PCIe buses,
for instance, PCIe switch, we need to extent bus-ranges
to as max as possible. We have 32 regions and could support
up to 31 buses except bus 0 for our root bridge.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add qos setting reg for some peripheral like sd, usb, pcie.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The newly introduced wrapper function only has one caller,
and this one is conditional, causing a harmless warning when
CONFIG_CPU_FREQ is disabled:
arch/x86/kernel/tsc.c:189:13: error: 'set_cyc2ns_scale' defined but not used [-Werror=unused-function]
My first idea was to move the wrapper inside of that #ifdef,
but on second thought it seemed nicer to remove it completely
again and rename __set_cyc2ns_scale back to set_cyc2ns_scale,
but leaving the extra argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 615cd03373 ("x86/tsc: Fix sched_clock() sync")
Link: http://lkml.kernel.org/r/20170517203949.2052220-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the SMIs are visible to all performance counters, because
many users want to measure everything including SMIs. But in some
cases, the SMI cycles should not be counted - for example, to calculate
the cost of an SMI itself. So a knob is needed.
When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance
counters will be effected. There is no way to do per-counter freeze
on SMI. So it should not use the per-event interface (e.g. ioctl or
event attribute) to set FREEZE_WHILE_SMM bit.
Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM
bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages
while in SMM.
Value has to be 0 or 1. It will be applied to all processors.
Also serialize the entire setting so we don't get multiple concurrent
threads trying to update to different values.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: bp@alien8.de
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When using the "aes-asm" implementation of AES (*not* the AES-NI
implementation) on an x86_64, v4.12-rc1 kernel with lockdep enabled, the
following warning was reported, along with a long unwinder dump:
WARNING: kernel stack regs at ffffc90000643558 in kworker/u4:2:155 has bad 'bp' value 000000000000001c
The problem is that aes_enc_block() and aes_dec_block() use %rbp as a
temporary register, which breaks stack traces if an interrupt occurs.
Fix this by replacing %rbp with %r9, which was being used to hold the
saved value of %rbp. This required rearranging the AES round macro
slightly since %r9d cannot be used as the target of a move from %ah-%dh.
Performance is essentially unchanged --- actually about 0.2% faster than
before. Interestingly, I also measured aes-generic as being nearly 7%
faster than aes-asm, so perhaps aes-asm has outlived its usefulness...
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All the drivers for the various hardware elements of the jz4740 SoC have
been modified to use the pinctrl framework for their pin configuration
needs.
As such, this platform code is now unused and can be deleted.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We set the pin configuration for the jz4780-nand and jz4780-uart
drivers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We set the pin configuration for the jz4740-nand, jz4740-mmc,
jz4740-fb, jz4740-pwm and jz4740-uart drivers.
This will permit those drivers to be cleaned out of the custom GPIO code
that they currently use.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For a description of the devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
For a description of the gpio devicetree nodes, please read
Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For a description of the pinctrl devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
For a description of the gpio devicetree nodes, please read
Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a pinctrl driver for each of the Ingenic SoCs supported by the
upstream Linux kernel. In order to switch away from the old GPIO
platform code, we now enable the pinctrl drivers by default for the
Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Split off support for Salvator-X boards with the ES1.x revision of the
R-Car H3 SoC into a separate file. The main r8a7795-salvator-x.dts file
now corresponds to Salvator-X with R-Car H3 ES2.0 or later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
