4cfad559da170508f96879bc12d039765befcf3e
30989 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
2bd8040174 |
Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.12 kernel cycle.
Core changes:
- Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
This was a much discussed change. It affects use cases where people
write drivers that might or might not be using GPIO resources. I
have decided that this is the lesser evil right now.
- Make gpiod_count() behave consistently across different hardware
descriptions.
- Fix the syntax around open drain/open source to not infer active
high/low semantics.
New drivers:
- A new single-register fixed-direction framework driver for hardware
that have lines controlled by a single register that just work in
one direction (out or in), including IRQ support.
- Support the Fintek F71889A GPIO SuperIO controller.
- Support the National NI 169445 MMIO GPIO.
- Support for the X-Gene derivative of the DWC GPIO controller
- Support for the Rohm BD9571MWV-M PMIC GPIO controller.
- Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
and replace both the Gemini and the Moxa ART custom drivers with
this driver.
Driver improvements:
- A whole slew of drivers have their spinlocks chaned to raw
spinlocks as they provide irqchips, and thus we are progressing on
realtime compliance.
- Use devm_irq_alloc_descs() in a slew of drivers, getting managed
resources.
- Support for the embedded PWM controller inside the MVEBU driver.
- Debounce, open source and open drain support for the Aspeed driver.
- Misc smaller fixes like spelling and syntax and whatnot"
* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: f7188x: Add a missing break
gpio: omap: return error if requested debounce time is not possible
gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
gpio: gpio-wcove: fix GPIO IRQ status mask
gpio: DT bindings, move tca9554 from pcf857x to pca953x
gpio: move tca9554 from pcf857x to pca953x
gpio: arizona: Correct check whether the pin is an input
gpio: Add XRA1403 DTS binding documentation
dt-bindings: add exar to vendor prefixes list
gpio: gpio-wcove: fix irq pending status bit width
gpio: dwapb: use dwapb_read instead of readl_relaxed
gpio: aspeed: Add open-source and open-drain support
gpio: aspeed: Add debounce support
gpio: aspeed: dt: Add optional clocks property
gpio: aspeed: dt: Fix description alignment in bindings document
gpio: mvebu: Add limited PWM support
gpio: Use unsigned int for interrupt numbers
gpio: f7188x: Add F71889A GPIO support.
gpio: core: Decouple open drain/source flag with active low/high
gpio: arizona: Correct handling for reading input GPIOs
...
|
||
Joerg Roedel
|
2c0248d688 | Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', 'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next | ||
Sean Paul
|
3c390df333 |
Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux into drm-misc-next
Backmerging Dave's 'drm-for-v4.12' pull request now that it's landed. There are a bunch of non-drm changes which are just random bits we hadn't yet picked up in misc-next. main drm pull request for 4.12 kernel Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0jHgzG18zOr5CYODyTqZfH55kOCOFqNnXiWnTb_uNWw@mail.gmail.com |
||
Shawn Guo
|
cd4b298334 |
dt-bindings: display: add support for ZTE VGA device
It adds bindings doc for ZTE VOU VGA output device. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491490870-6330-4-git-send-email-shawnguo@kernel.org |
||
|
Linus Torvalds
|
4c174688ee |
Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features for this release:
- Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
- The rewrite was needed to add plugins to be unique to tracing
instances. i.e. mkdir instance/foo; cd instances/foo; echo
do_IRQ:stacktrace > set_ftrace_filter The old way was written very
hacky. This removes a lot of those hacks.
- New "function-fork" tracing option. When set, pids in the
set_ftrace_pid will have their children added when the processes
with their pids listed in the set_ftrace_pid file forks.
- Exposure of "maxactive" for kretprobe in kprobe_events
- Allow for builtin init functions to be traced by the function
tracer (via the kernel command line). Module init function tracing
will come in the next release.
- Added more selftests, and have selftests also test in an instance"
* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
ring-buffer: Return reader page back into existing ring buffer
selftests: ftrace: Allow some event trigger tests to run in an instance
selftests: ftrace: Have some basic tests run in a tracing instance too
selftests: ftrace: Have event tests also run in an tracing instance
selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
selftests: ftrace: Allow some tests to be run in a tracing instance
tracing/ftrace: Allow for instances to trigger their own stacktrace probes
tracing/ftrace: Allow for the traceonoff probe be unique to instances
tracing/ftrace: Enable snapshot function trigger to work with instances
tracing/ftrace: Allow instances to have their own function probes
tracing/ftrace: Add a better way to pass data via the probe functions
ftrace: Dynamically create the probe ftrace_ops for the trace_array
tracing: Pass the trace_array into ftrace_probe_ops functions
tracing: Have the trace_array hold the list of registered func probes
ftrace: If the hash for a probe fails to update then free what was initialized
ftrace: Have the function probes call their own function
ftrace: Have each function probe use its own ftrace_ops
ftrace: Have unregister_ftrace_function_probe_func() return a value
ftrace: Add helper function ftrace_hash_move_and_update_ops()
ftrace: Remove data field from ftrace_func_probe structure
...
|
||
|
Linus Torvalds
|
dd23f273d9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: - a few misc things - most of MM - KASAN updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) kasan: separate report parts by empty lines kasan: improve double-free report format kasan: print page description after stacks kasan: improve slab object description kasan: change report header kasan: simplify address description logic kasan: change allocation and freeing stack traces headers kasan: unify report headers kasan: introduce helper functions for determining bug type mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page mm: hwpoison: call shake_page() unconditionally mm/swapfile.c: fix swap space leak in error path of swap_free_entries() mm/gup.c: fix access_ok() argument type mm/truncate: avoid pointless cleancache_invalidate_inode() calls. mm/truncate: bail out early from invalidate_inode_pages2_range() if mapping is empty fs/block_dev: always invalidate cleancache in invalidate_bdev() fs: fix data invalidation in the cleancache during direct IO zram: reduce load operation in page_same_filled zram: use zram_free_page instead of open-coded zram: introduce zram data accessor ... |
||
Mike Kravetz
|
70bc0dc578 |
Documentation: vm, add hugetlbfs reservation overview
Adding a brief overview of hugetlbfs reservation design and implementation as an aid to those making code modifications in this area. Link: http://lkml.kernel.org/r/1491586995-13085-1-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
9a4caf1e9f |
mm: memcontrol: provide shmem statistics
Cgroups currently don't report how much shmem they use, which can be useful data to have, in particular since shmem is included in the cache/file item while being reclaimed like anonymous memory. Add a counter to track shmem pages during charging and uncharging. Link: http://lkml.kernel.org/r/20170221164343.32252-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Chris Down <cdown@fb.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Shaohua Li
|
cf8496ea80 |
proc: show MADV_FREE pages info in smaps
Show MADV_FREE pages info of each vma in smaps. The interface is for diganose or monitoring purpose, userspace could use it to understand what happens in the application. Since userspace could dirty MADV_FREE pages without notice from kernel, this interface is the only place we can get accurate accounting info about MADV_FREE pages. [mhocko@kernel.org: update Documentation/filesystems/proc.txt] Link: http://lkml.kernel.org/r/89efde633559de1ec07444f2ef0f4963a97a2ce8.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
1684096b1e |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"More exchaustive description of primary updates in this release:
- Lots of driver fixes and misc fixes across the board.
- I had to base on a net-next tree because the IPoIB Accelorator
patches needed it.
Unfortunately, it was known to Mellanox that there would need to be
an IPoIB accelorator patch to the net tree (which left some
functions turned off by an #ifdef construct to avoid warnings about
defined but unused functions), then one to the RDMA tree, then a
fixup that went back and re-enabled the functions in the net tree
and enabled their use in the rdma tree
Also, a sparse fix was sent to the net tree after I did my pull,
and the fixup patch conflicts quite directly with that sparse fix,
so I'm going to submit the fixup patch towards the end of the merge
window by itself and based upon your master branch at the time.
- Two separate rounds of hfi1 fixes, one that got dropped from last
release because it came in just a day or two before the end of the
merge window and then the one from this release cycle.
Of note is that I now have a third series that just landed from
Intel yesterday. It is not included in this pull request, but I may
submit it by the end of the week. I'll talk to Intel about
improving the timing of thier submissions for my workflow.
- Changes to our idr usage in the RDMA subsystem that will tie into
our cgroup management and also into the upcoming changes for the
RDMA kernel<->userspace API.
- Addition of support for a netdev to be tied to an RDMA device at
the core level
- Addition of the VNIC driver from Intel.
While IPoIB provides IP over InfiniBand (and *only* IP, no lower
layer protocol headers are allowed or supported), the VNIC driver
presents a virtual Ethernet device with support for things like
varying Ethertypes, VLANs, priorities and other features of
Ethernet.
The virtual devices are centrally managed by the OPA fabric
manager, making this (for the time being) a strictly OPA specific
feature.
- Improvements to the On-Demand Paging support in the RDMA subsystem.
- Addition of three significant OPA changes.
While we added OPA support some time ago (via the hfi1 driver), the
RDMA subsystem has so far glossed over the areas where OPA and
InfiniBand differ.
With this release we are starting to add support for the OPA
extensions into the RDMA core in the following area: Extended port
information for OPA is now supported, extended Address Handle
attributes for OPA are now supported, and extended SA Queries to
get OPA specific subnet information is now supported.
Concise summary from the tag:
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (191 commits)
infiniband: avoid dereferencing uninitialized dst on error path
IB/SA: Add OPA addr header
IB/mlx5: Add port_xmit_wait to counter registers read
IB/ocrdma: fix out of bounds access to local buffer
IB/mlx4: Fix incorrect order of formal and actual parameters
IB/mlx4: Change flush logic so it adheres to the variable name
mlx5: Fix mlx5_ib_map_mr_sg mr length
IB/rxe: Don't clamp residual length to mtu
IB/SA: Add support to query OPA path records
IB/SA: Add OPA path record type
IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields
IB/SA: Introduce path record specific types
IB/SA: Rename ib_sa_path_rec to sa_path_rec
IB/CM: Add braces when using sizeof
IB/core: Define 'opa' rdma_ah_attr type
IB/core: Define 'ib' and 'roce' rdma_ah_attr types
IB/core: Use rdma_ah_attr accessor functions
IB/core: Add accessor functions for rdma_ah_attr fields
IB/PVRDMA: Rename ib_ah_attr related functions
IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr
...
|
||
|
Linus Torvalds
|
16a12fa9ae |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ... |
||
|
Linus Torvalds
|
d25e436c4b |
Merge tag 'spi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's quite a lot of small driver specific fixes and enhancements in
this release but the main activity has been around the loopback and
spidev test drivers which is good to see as it should hopefully help
improve the quality of all the drivers as people start to make use of
the new code:
- Additional tests in the loopback test driver for vmalloc()
compatibility and around delays together with fixes for existing
tests.
- Support for testing continuous data transfer for use in soak
testing.
- Device property support for board info platforms.
- Support for registering empty sets of devices via board info
(useful when writing code to enumerate hardware automatically)"
* tag 'spi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
spi: cadence: Allow for GPIO pins to be used as chipselects
spi-imx: Implements handling of the SPI_READY mode flag.
spi: tegra: fix spelling mistake: "trasfer" -> "transfer"
spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
spi: Add can_dma like interface for spi_flash_read
spi: dw: Disable clock after unregistering the host
spi: double time out tolerance
spi: atmel: add deepest PM support to SAMA5D2
spi: atmel: factorize reusable code for SPI controller init
spi: orion: add LSB support
spi: pl022: don't use uninitialized variable
spi: loopback-test: fix spelling mistake: "minimam" -> "minimum"
spi: dynamycally allocated message initialization
spi: spi-ti-qspi: Remove unused dma_dev variable
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
spi: spi-ti-qspi: Use dma_engine wrapper for dma memcpy call
spi: spidev_test: add option to continuously transfer data
spi: loopback-test: fix potential integer overflow on multiple
spi: sun6i: update max transfer size reported
spi: pl022: Document property values
...
|
||
|
Linus Torvalds
|
a90f0e9ebb |
Merge tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a lot going on with the regulator API for this release, much
more in the core than in the drivers for a change:
- Fixes for voltage change propagation through dumb power switches.
- A notification when regulators are enabled.
- A new settling time property for regulators where the time taken to
move to a new voltage is not related to the size of the change.
- Some reorganization of the Arizona drivers in preparation for
sharing the code with the next generation devices they've been
integrated with.
- Support for newer Freescale chips in the Anatop regulator.
- A new driver for voltage controlled regulators to cope with some
exciting ChromeOS hardware designs.
- Support for Rohm BD9571MWV-M and TI TPS65132"
* tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits)
regulator: Add ROHM BD9571MWV-M PMIC regulator driver
regulator: arizona-ldo1: Factor out generic initialization
regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona
regulator: arizona-ldo1: Move pdata into a separate structure
regulator: arizona-micsupp: Factor out generic initialization
regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona
regulator: arizona-micsupp: Move pdata into a separate structure
regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators
regulator: anatop: make regulator name property required
regulator: tps65023: Fix inverted core enable logic.
regulator: anatop: make sure regulator name is properly defined
regulator: core: Allow dummy regulators for supplies
regulator: core: Only propagate voltage changes to if it can change voltages
regulator: vctrl: Fix out of bounds array access for vctrl->vtable
regulator: tps65132: fix platform_no_drv_owner.cocci warnings
regulator: tps65132: Fix off-by-one for .max_register setting
regulator: anatop: set default voltage selector for pcie
regulator: tps65132: add device-tree binding
regulator: tps65132: add regulator driver for TI TPS65132
regulator: anatop: remove unneeded name field of struct anatop_regulator
...
|
||
|
Linus Torvalds
|
14b730723a |
Merge branch 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wilfram Sang:
"I2C has the following updates for you:
- an immutable cross-subsystem branch fixing PMIC access on Intel
Baytrail
- bigger driver updates to the designware, meson, exynos5 drivers
- new i2c_acpi_new_device() function to create devices from ACPI
- struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to
allow custom IRQ mapping in case the default does not fit
- mux subsystem centralized error messages in its core
- new driver for ltc4306 i2c mux
- usual set of small updates"
* 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
i2c: thunderx: Enable HWMON class probing
i2c: rcar: clarify PM handling with more comments
i2c: rcar: fix resume by always initializing registers before transfer
i2c: tegra: fix spelling mistake: "contoller" -> "controller"
i2c: exynos5: use core helper to get driver data
i2c: exynos5: de-duplicate error logs on clock setup
i2c: exynos5: simplify clock frequency handling
i2c: exynos5: simplify timings calculation
i2c: designware-baytrail: fix potential null pointer dereference on dev
i2c: designware: Get selected speed mode sda-hold-time via ACPI
[media] cx231xx: stop double error reporting
i2c: core: Allow drivers to disable i2c-core irq mapping
i2c: core: Add new i2c_acpi_new_device helper function
i2c: core: Allow getting ACPI info by index
i2c: img-scb: use setup_timer
i2c: i2c-scmi: add a MS HID
i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch
i2c: mux: reg: stop double error reporting
i2c: mux: pinctrl: stop double error reporting
...
|
||
|
Linus Torvalds
|
d26f552ebb |
Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ... |
||
|
Linus Torvalds
|
e897f267c5 |
Merge tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones: "New Arctic Sand ARC2C0608 LED Backlight driver" * tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: Add support for Arctic Sand LED backlight driver chips dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight |
||
|
Linus Torvalds
|
221656e7c4 |
Merge tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a relatively calm development cycle, and no scaring changes are
seen in both core and driver sides. Here are some highlights:
ASoC:
- A new API for hooking up jacks more generically and easily
- Card longname is set based on DMI for a unique UCM profile
- Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960,
Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86
systems with DA7213
HD-audio:
- Many new quirks to support headset for various devices (mostly ASUS
ones) as usual
- Support for dual codecs on some Gigabyte mobos and Lenovo laptop
- Improvement on PCM position reporting for Skylake and newer
FireWire:
- New drivers for MOTU and RME Fireface series
- Updates for Digidesign Digi00x and TASCAM series
- Support for tracepoints
Others:
- USB-audio: improved support for quirk_alias option
- Cleanups, constification allover the places"
* tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
ASoC: codec: wm8960: Relax bit clock computation when using PLL
ASoC: codec: wm9860: avoid maybe-uninitialized warning
ASoC: nau8824: leave Class D gain at chip default
ASoC: nau8824: rename controls to match DAPM controls
ASoC: Intel: Skylake: Return negative error code
ASoC: Intel: Skylake: Fix unused variable warning
ASoC: Intel: Skylake: fix uninitialized pointer use
ASoC: sti: Fix error handling if of_clk_get() fails
ASoC: cs4271: configure reset GPIO as output
ASoC: dwc: Disallow building designware_pcm as a module
ALSA: ali5451: fix spelling mistake in "ali_capture_preapre"
ASoC: stm32: add SAI driver
ASoC: stm32: add bindings for SAI
ASoC: Intel: Skylake: Add loadable module support on KBL platform
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version
ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake
ASoC: Intel: Skylake: Modify arguments to reuse module transfer function
ASoC: Intel: Skylake: Commonize library load
ASoC: Intel: Skylake: Move sst common initialization to a helper function
ASoC: nau8824: new driver
...
|
||
|
Linus Torvalds
|
2f34c1231b |
Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux
Pull drm u pdates from Dave Airlie: "This is the main drm pull request for v4.12. Apart from two fixes pulls, everything should have been in drm-next for at least 2 weeks. The biggest thing in here is AMD released the public headers for their upcoming VEGA GPUs. These as always are quite a sizeable chunk of header files. They've also added initial non-display support for those GPUs, though they aren't available in production yet. Otherwise it's pretty much normal. New bridge drivers: - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++ - generic LVDS bridge support. Core: - Displayport link train failure reporting to userspace - debugfs interface cleaned up - subsystem TODO in kerneldoc now - Extended fbdev support (flipping and vblank wait) - drm_platform removed - EDP CRC support in helper - HF-VSDB SCDC support in EDID parser - Lots of code cleanups and header extraction - Thunderbolt external GPU awareness - Atomic helper improvements - Documentation improvements panel: - Sitronix and Samsung new panel support amdgpu: - Preliminary vega10 support - Multi-level page table support - GPU sensor support for userspace - PRT support for sparse buffers - SR-IOV improvements - Non-contig VRAM CPU mapping i915: - Atomic modesetting enabled by default on Gen5+ - LSPCON improvements - Atomic state handling for cdclk - GPU reset improvements - In-kernel unit tests - Geminilake improvements and color manager support - Designware i2c fixes - vblank evasion improvements - Hotplug safe connector iterators - GVT scheduler QoS support - GVT Kabylake support nouveau: - Acceleration support for Pascal (GP10x). - Rearchitecture of code handling proprietary signed firmware - Fix GTX 970 with odd MMU configuration - GP10B support - GP107 acceleration support vmwgfx: - Atomic modesetting support for vmwgfx omapdrm: - Support for render nodes - Refactor omapdss code - Fix some probe ordering issues - Fix too dark RGB565 rendering sunxi: - prelim rework for multiple pipes. mali-dp: - Color management support - Plane scaling - Power management improvements imx-drm: - Prefetch Resolve Engine/Gasket on i.MX6QP - Deferred plane disabling - Separate alpha support mediatek: - Mediatek SoC MT2701 support rcar-du: - Gen3 HDMI support msm: - 4k support for newer chips - OPP bindings for gpu - prep work for per-process pagetables vc4: - HDMI audio support - fixes qxl: - minor fixes. dw-hdmi: - PHY improvements - CSC fixes - Amlogic GX SoC support" * tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits) drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine drm: mali-dp: use div_u64 for expensive 64-bit divisions drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support ... |
||
|
Linus Torvalds
|
d35a878ae1 |
Merge tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer: - A major update for DM cache that reduces the latency for deciding whether blocks should migrate to/from the cache. The bio-prison-v2 interface supports this improvement by enabling direct dispatch of work to workqueues rather than having to delay the actual work dispatch to the DM cache core. So the dm-cache policies are much more nimble by being able to drive IO as they see fit. One immediate benefit from the improved latency is a cache that should be much more adaptive to changing workloads. - Add a new DM integrity target that emulates a block device that has additional per-sector tags that can be used for storing integrity information. - Add a new authenticated encryption feature to the DM crypt target that builds on the capabilities provided by the DM integrity target. - Add MD interface for switching the raid4/5/6 journal mode and update the DM raid target to use it to enable aid4/5/6 journal write-back support. - Switch the DM verity target over to using the asynchronous hash crypto API (this helps work better with architectures that have access to off-CPU algorithm providers, which should reduce CPU utilization). - Various request-based DM and DM multipath fixes and improvements from Bart and Christoph. - A DM thinp target fix for a bio structure leak that occurs for each discard IFF discard passdown is enabled. - A fix for a possible deadlock in DM bufio and a fix to re-check the new buffer allocation watermark in the face of competing admin changes to the 'max_cache_size_bytes' tunable. - A couple DM core cleanups. * tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits) dm bufio: check new buffer allocation watermark every 30 seconds dm bufio: avoid a possible ABBA deadlock dm mpath: make it easier to detect unintended I/O request flushes dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit() dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH dm: introduce enum dm_queue_mode to cleanup related code dm mpath: verify __pg_init_all_paths locking assumptions at runtime dm: verify suspend_locking assumptions at runtime dm block manager: remove an unused argument from dm_block_manager_create() dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue() dm mpath: delay requeuing while path initialization is in progress dm mpath: avoid that path removal can trigger an infinite loop dm mpath: split and rename activate_path() to prepare for its expanded use dm ioctl: prevent stack leak in dm ioctl call dm integrity: use previously calculated log2 of sectors_per_block dm integrity: use hex2bin instead of open-coded variant dm crypt: replace custom implementation of hex2bin() dm crypt: remove obsolete references to per-CPU state dm verity: switch to using asynchronous hash crypto API dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues ... |
||
|
Linus Torvalds
|
e5021876c9 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD updates from Shaohua Li: - Add Partial Parity Log (ppl) feature found in Intel IMSM raid array by Artur Paszkiewicz. This feature is another way to close RAID5 writehole. The Linux implementation is also available for normal RAID5 array if specific superblock bit is set. - A number of md-cluser fixes and enabling md-cluster array resize from Guoqing Jiang - A bunch of patches from Ming Lei and Neil Brown to rewrite MD bio handling related code. Now MD doesn't directly access bio bvec, bi_phys_segments and uses modern bio API for bio split. - Improve RAID5 IO pattern to improve performance for hard disk based RAID5/6 from me. - Several patches from Song Liu to speed up raid5-cache recovery and allow raid5 cache feature disabling in runtime. - Fix a performance regression in raid1 resync from Xiao Ni. - Other cleanup and fixes from various people. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (84 commits) md/raid10: skip spare disk as 'first' disk md/raid1: Use a new variable to count flighting sync requests md: clear WantReplacement once disk is removed md/raid1/10: remove unused queue md: handle read-only member devices better. md/raid10: wait up frozen array in handle_write_completed uapi: fix linux/raid/md_p.h userspace compilation error md-cluster: Fix a memleak in an error handling path md: support disabling of create-on-open semantics. md: allow creation of mdNNN arrays via md_mod/parameters/new_array raid5-ppl: use a single mempool for ppl_io_unit and header_page md/raid0: fix up bio splitting. md/linear: improve bio splitting. md/raid5: make chunk_aligned_read() split bios more cleanly. md/raid10: simplify handle_read_error() md/raid10: simplify the splitting of requests. md/raid1: factor out flush_bio_list() md/raid1: simplify handle_read_error(). Revert "block: introduce bio_copy_data_partial" md/raid1: simplify alloc_behind_master_bio() ... |
||
|
Linus Torvalds
|
0302e28dee |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
IMA:
- provide ">" and "<" operators for fowner/uid/euid rules
KEYS:
- add a system blacklist keyring
- add KEYCTL_RESTRICT_KEYRING, exposes keyring link restriction
functionality to userland via keyctl()
LSM:
- harden LSM API with __ro_after_init
- add prlmit security hook, implement for SELinux
- revive security_task_alloc hook
TPM:
- implement contextual TPM command 'spaces'"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (98 commits)
tpm: Fix reference count to main device
tpm_tis: convert to using locality callbacks
tpm: fix handling of the TPM 2.0 event logs
tpm_crb: remove a cruft constant
keys: select CONFIG_CRYPTO when selecting DH / KDF
apparmor: Make path_max parameter readonly
apparmor: fix parameters so that the permission test is bypassed at boot
apparmor: fix invalid reference to index variable of iterator line 836
apparmor: use SHASH_DESC_ON_STACK
security/apparmor/lsm.c: set debug messages
apparmor: fix boolreturn.cocci warnings
Smack: Use GFP_KERNEL for smk_netlbl_mls().
smack: fix double free in smack_parse_opts_str()
KEYS: add SP800-56A KDF support for DH
KEYS: Keyring asymmetric key restrict method with chaining
KEYS: Restrict asymmetric key linkage using a specific keychain
KEYS: Add a lookup_restriction function for the asymmetric key type
KEYS: Add KEYCTL_RESTRICT_KEYRING
KEYS: Consistent ordering for __key_link_begin and restrict check
KEYS: Add an optional lookup_restriction hook to key_type
...
|
||
Christophe Leroy
|
726bd22310 |
powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
This patch allows the use of IRQ to notify the change of GPIO status
on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs
in the Device Tree.
Ex:
CPM1_PIO_C: gpio-controller@960 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-c";
reg = <0x960 0x10>;
fsl,cpm1-gpio-irq-mask = <0x0fff>;
interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
interrupt-parent = <&CPM_PIC>;
gpio-controller;
};
The property 'fsl,cpm1-gpio-irq-mask' defines which of the 16 GPIOs
have the associated interrupts defined in the 'interrupts' property.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
||
|
Linus Torvalds
|
89c9fea3c8 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: tty: fix comment for __tty_alloc_driver() init/main: properly align the multi-line comment init/main: Fix double "the" in comment Fix dead URLs to ftp.kernel.org drivers: Clean up duplicated email address treewide: Fix typo in xml/driver-api/basics.xml tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall" selftests/timers: Spelling s/privledges/privileges/ HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/ net: phy: dp83848: Fix Typo UBI: Fix typos Documentation: ftrace.txt: Correct nice value of 120 priority net: fec: Fix typo in error msg and comment treewide: Fix typos in printk |
||
|
Linus Torvalds
|
76f1948a79 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces |
||
|
Linus Torvalds
|
7af4c727c7 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem updates from Jiri Kosina: - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been growing dramatically during past years, so the time has come to switch over the default, and perform the pro-active reading only in cases where it's really needed (multitouch, wacom). The only place where this behavior is (in some form) preserved is hiddev so that we don't introduce userspace-visible change of behavior. From Benjamin Tissoires - HID++ support for power_supply / baterry reporting. From Benjamin Tissoires and Bastien Nocera - Vast improvements / rework of DS3 and DS4 in Sony driver. From Roderick Colenbrander - Improvment (in terms of getting closer to the Microsoft's interpretation of slightly ambiguous specification) of logical range interpretation in case null-state is set in the rdesc. From Valtteri Heikkilä and Tomasz Kramkowski - A lot of newly supported device IDs and small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits) HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch HID: asus: support backlight on USB keyboards HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq HID: wacom: generic: sync pad events only for actual packets HID: sony: remove redundant check for -ve err HID: sony: Make sure to unregister sensors on failure HID: sony: Make DS4 bt poll interval adjustable HID: sony: Set proper bit flags on DS4 output report HID: sony: DS4 use brighter LED colors HID: sony: Improve navigation controller axis/button mapping HID: sony: Use DS3 MAC address as unique identifier on USB HID: logitech-hidpp: add a sysfs file to tell we support power_supply HID: logitech-hidpp: enable HID++ 1.0 battery reporting HID: logitech-hidpp: add support for battery status for the K750 HID: logitech-hidpp: battery: provide CAPACITY_LEVEL HID: logitech-hidpp: rename battery level into capacity HID: logitech-hidpp: battery: provide ONLINE property HID: logitech-hidpp: notify battery on connect HID: logitech-hidpp: return an error if the queried feature is not present HID: logitech-hidpp: create the battery for all types of HID++ devices ... |
||
|
Linus Torvalds
|
68fed41e0f |
Merge tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.12 cycle.
The extra week before the merge window actually resulted in some of
the type of fixes that usually arrive after the merge window already
starting to trickle in from eager developers using -next, I'm
impressed.
I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
with the onset of Samsung patches. It works great.
Apart from that it is a boring round, just incremental updates and
fixes all over the place, no serious core changes or anything exciting
like that. The most pleasing to see is Julia Cartwrights work to audit
the irqchip-providing drivers for realtime locking compliance. It's
one of those "I should really get around to looking into that" things
that have been on my TODO list since forever.
Summary:
Core changes:
- add bi-directional and output-enable pin configurations to the
generic bindings and generic pin controlling core.
New drivers or subdrivers:
- Armada 37xx SoC pin controller and GPIO support.
- Axis ARTPEC-6 SoC pin controller support.
- AllWinner A64 R_PIO controller support, and opening up the
AllWinner sunxi driver for ARM64 use.
- Rockchip RK3328 support.
- Renesas R-Car H3 ES2.0 support.
- STM32F469 support in the STM32 driver.
- Aspeed G4 and G5 pin controller support.
Improvements:
- a whole slew of realtime improvements to drivers implementing
irqchips: BCM, AMD, SiRF, sunxi, rockchip.
- switch meson driver to get the GPIO ranges from the device tree.
- input schmitt trigger support on the Rockchip driver.
- enable the sunxi (AllWinner) driver to also be used on ARM64
silicon.
- name the Qualcomm QDF2xxx GPIO lines.
- support GMMR GPIO regions on the Intel Cherryview. This fixes a
serialization problem on these platforms.
- pad retention support for the Samsung Exynos 5433.
- handle suspend-to-ram in the AT91-pio4 driver.
- pin configuration support in the Aspeed driver.
Cleanups:
- the final name of Rockchip RK1108 was RV1108 so rename the driver
and variables to stay consistent"
* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mediatek: Add missing pinctrl bindings for mt7623
pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
pinctrl: artpec6: Remove .owner field for driver
pinctrl: tegra: xusb: Silence sparse warnings
ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
pinctrl: make artpec6 explicitly non-modular
pinctrl: aspeed: g5: Add pinconf support
pinctrl: aspeed: g4: Add pinconf support
pinctrl: aspeed: Add core pinconf support
pinctrl: aspeed: Document pinconf in devicetree bindings
pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
pinctrl: stm32: Add STM32F469 MCU support
Documentation: dt: Remove ngpios from stm32-pinctrl binding
pinctrl: stm32: replace device_initcall() with arch_initcall()
pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
pinctrl: armada-37xx: Add gpio support
pinctrl: armada-37xx: Add pin controller support for Armada 37xx
pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
pinctrl: core: Make pinctrl_init_controller() static
pinctrl: generic: Add bi-directional and output-enable
...
|
||
|
Linus Torvalds
|
be580e7522 |
Merge tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups" * tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits) mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY mmc: sdhci-xenon: Fix the work flow in xenon_remove(). MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data() mmc: cavium: Use module_pci_driver to simplify the code mmc: cavium: Add MMC support for Octeon SOCs. mmc: cavium: Fix detection of block or byte addressing. mmc: core: Export API to allow hosts to get the card address mmc: sdio: Fix sdio wait busy implement limitation mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card clk: apn806: fix spelling mistake: "mising" -> "missing" mmc: sdhci-of-esdhc: add delay between tuning cycles mmc: sdhci: Control the delay between tuning commands mmc: sdhci-of-esdhc: add tuning support mmc: sdhci-of-esdhc: add support for signal voltage switch mmc: sdhci-of-esdhc: add peripheral clock support mmc: sdhci-pci: Allow for 3 bytes from Intel DSM mmc: cavium: Fix a shift wrapping bug ... |
||
|
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
||
|
Linus Torvalds
|
5a0387a8a8 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ... |
||
|
Linus Torvalds
|
c58d4055c0 |
Merge tag 'docs-4.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet: "A reasonably busy cycle for documentation this time around. There is a new guide for user-space API documents, rather sparsely populated at the moment, but it's a start. Markus improved the infrastructure for converting diagrams. Mauro has converted much of the USB documentation over to RST. Plus the usual set of fixes, improvements, and tweaks. There's a bit more than the usual amount of reaching out of Documentation/ to fix comments elsewhere in the tree; I have acks for those where I could get them" * tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits) docs: Fix a couple typos docs: Fix a spelling error in vfio-mediated-device.txt docs: Fix a spelling error in ioctl-number.txt MAINTAINERS: update file entry for HSI subsystem Documentation: allow installing man pages to a user defined directory Doc/PM: Sync with intel_powerclamp code behavior zr364xx.rst: usb/devices is now at /sys/kernel/debug/ usb.rst: move documentation from proc_usb_info.txt to USB ReST book convert philips.txt to ReST and add to media docs docs-rst: usb: update old usbfs-related documentation arm: Documentation: update a path name docs: process/4.Coding.rst: Fix a couple of document refs docs-rst: fix usb cross-references usb: gadget.h: be consistent at kernel doc macros usb: composite.h: fix two warnings when building docs usb: get rid of some ReST doc build errors usb.rst: get rid of some Sphinx errors usb/URB.txt: convert to ReST and update it usb/persist.txt: convert to ReST and add to driver-api book usb/hotplug.txt: convert to ReST and add to driver-api book ... |
||
|
Linus Torvalds
|
b68e7e952f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky: - three merges for KVM/s390 with changes for vfio-ccw and cpacf. The patches are included in the KVM tree as well, let git sort it out. - add the new 'trng' random number generator - provide the secure key verification API for the pkey interface - introduce the z13 cpu counters to perf - add a new system call to set up the guarded storage facility - simplify TASK_SIZE and arch_get_unmapped_area - export the raw STSI data related to CPU topology to user space - ... and the usual churn of bug-fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits) s390/crypt: use the correct module alias for paes_s390. s390/cpacf: Introduce kma instruction s390/cpacf: query instructions use unique parameters for compatibility with KMA s390/trng: Introduce s390 TRNG device driver. s390/crypto: Provide s390 specific arch random functionality. s390/crypto: Add new subfunctions to the cpacf PRNO function. s390/crypto: Renaming PPNO to PRNO. s390/pageattr: avoid unnecessary page table splitting s390/mm: simplify arch_get_unmapped_area[_topdown] s390/mm: make TASK_SIZE independent from the number of page table levels s390/gs: add regset for the guarded storage broadcast control block s390/kvm: Add use_cmma field to mm_context_t s390/kvm: Add PGSTE manipulation functions vfio: ccw: improve error handling for vfio_ccw_mdev_remove vfio: ccw: remove unnecessary NULL checks of a pointer s390/spinlock: remove compare and delay instruction s390/spinlock: use atomic primitives for spinlocks s390/cpumf: simplify detection of guest samples s390/pci: remove forward declaration s390/pci: increase the PCI_NR_FUNCTIONS default ... |
||
Jiri Kosina
|
4d6ca227c7 | Merge branch 'for-4.12/asus' into for-linus | ||
|
Jiri Kosina
|
800f3eef8e | Merge branch 'for-4.12/sony' into for-linus | ||
|
Jiri Kosina
|
18fc2163b8 | Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', 'for-4.12/cp2112', 'for-4.12/hid-core-null-state-handling', 'for-4.12/hiddev', 'for-4.12/i2c-hid', 'for-4.12/innomedia', 'for-4.12/logitech-hidpp-battery-power-supply', 'for-4.12/multitouch', 'for-4.12/nti', 'for-4.12/upstream' and 'for-4.12/wacom' into for-linus | ||
|
Linus Torvalds
|
d3b5d35290 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
|
||
Takashi Iwai
|
a5c3b32a11 |
Merge tag 'asoc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.12 A quiet release for the core, but lots of new drivers this time around: - A new, generalized, API for hooking up jacks which makes it easier to write generic machine drivers for simple cases. - Continuing fixes for issues with the x86 CPU drivers. - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213 |
||
|
Linus Torvalds
|
7d6a31c394 |
Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar:
"The biggest update is the addition of USB3 debug port based
early-console.
Greg was fine with the USB changes and with the routing of these
patches:
https://www.spinics.net/lists/linux-usb/msg155093.html"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
usb/doc: Add document for USB3 debug port usage
usb/serial: Add DBC debug device support to usb_debug
x86/earlyprintk: Add support for earlyprintk via USB3 debug port
usb/early: Add driver for xhci debug capability
x86/timers: Add simple udelay calibration
|
||
Christophe Vu-Brugier
|
38d454f0b5 |
Documentation/target: add an example script to configure an iSCSI target
The script illustrates how to interact with configfs to create a very simple LIO iSCSI target with a file or block device backstore. The script can serve as a starting point for people that cannot use targetcli because Python is not available on their machine. Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> |
||
|
Linus Torvalds
|
a52bbaf4a3 |
Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar: "The biggest changes are an extension of the Intel RDT code to extend it with Intel Memory Bandwidth Allocation CPU support: MBA allows bandwidth allocation between cores, while CBM (already upstream) allows CPU cache partitioning. There's also misc smaller fixes and updates" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/intel_rdt: Return error for incorrect resource names in schemata x86/intel_rdt: Trim whitespace while parsing schemata input x86/intel_rdt: Fix padding when resource is enabled via mount x86/intel_rdt: Get rid of anon union x86/cpu: Keep model defines sorted by model number x86/intel_rdt/mba: Add schemata file support for MBA x86/intel_rdt: Make schemata file parsers resource specific x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation x86/intel_rdt: Make information files resource specific x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA) x86/intel_rdt/mba: Memory bandwith allocation feature detect x86/intel_rdt: Add resource specific msr update function x86/intel_rdt: Move CBM specific data into a struct x86/intel_rdt: Cleanup namespace to support multiple resource types Documentation, x86: Intel Memory bandwidth allocation x86/intel_rdt: Organize code properly x86/intel_rdt: Init padding only if a device exists x86/intel_rdt: Add cpus_list rdtgroup file x86/intel_rdt: Cleanup kernel-doc x86/intel_rdt: Update schemata read to show data in tabular format ... |
||
|
Linus Torvalds
|
16b76293c5 |
Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- reworking of the e820 code: separate in-kernel and boot-ABI data
structures and apply a whole range of cleanups to the kernel side.
No change in functionality.
- enable KASLR by default: it's used by all major distros and it's
out of the experimental stage as well.
- ... misc fixes and cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
x86/reboot: Turn off KVM when halting a CPU
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
x86: Enable KASLR by default
boot/param: Move next_arg() function to lib/cmdline.c for later reuse
x86/boot: Fix Sparse warning by including required header file
x86/boot/64: Rename start_cpu()
x86/xen: Update e820 table handling to the new core x86 E820 code
x86/boot: Fix pr_debug() API braindamage
xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
x86/boot/e820: Simplify e820__update_table()
x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
x86/boot/e820: Fix and clean up e820_type switch() statements
x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
x86/boot/e820: Remove unnecessary #include's
x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
x86/boot/e820: Use bool in query APIs
x86/boot/e820: Document e820__reserve_setup_data()
x86/boot/e820: Clean up __e820__update_table() et al
...
|
||
|
Linus Torvalds
|
3dee9fb2a4 |
Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- add the 'Corrected Errors Collector' kernel feature which collect
and monitor correctable errors statistics and will preemptively
(soft-)offline physical pages that have a suspiciously high error
count.
- handle MCE errors during kexec() more gracefully
- factor out and deprecate the /dev/mcelog driver
- ... plus misc fixes and cleanpus"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
ACPI/APEI: Use setup_deferrable_timer()
x86/mce: Update notifier priority check
x86/mce: Enable PPIN for Knights Landing/Mill
x86/mce: Do not register notifiers with invalid prio
x86/mce: Factor out and deprecate the /dev/mcelog driver
RAS: Add a Corrected Errors Collector
x86/mce: Rename mce_log to mce_log_buffer
x86/mce: Rename mce_log()'s argument
x86/mce: Init some CPU features early
x86/mce: Handle broadcasted MCE gracefully with kexec
|
||
|
Linus Torvalds
|
7c8c03bfc7 |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- Kprobes and uprobes changes:
- Make their trampolines read-only while they are used
- Make UPROBES_EVENTS default-y which is the distro practice
- Apply misc fixes and robustization to probe point insertion.
- add support for AMD IOMMU events
- extend hw events on Intel Goldmont CPUs
- ... plus misc fixes and updates.
Tooling side changes:
- support s390 jump instructions in perf annotate (Christian
Borntraeger)
- vendor hardware events updates (Andi Kleen)
- add argument support for SDT events in powerpc (Ravi Bangoria)
- beautify the statx syscall arguments in 'perf trace' (Arnaldo
Carvalho de Melo)
- handle inline functions in callchains (Jin Yao)
- enable sorting by srcline as key (Milian Wolff)
- add 'brstackinsn' field in 'perf script' to reuse the x86
instruction decoder used in the Intel PT code to study hot paths to
samples (Andi Kleen)
- add PERF_RECORD_NAMESPACES so that the kernel can record
information required to associate samples to namespaces, helping in
container problem characterization. (Hari Bathini)
- allow sorting by symbol_size in 'perf report' and 'perf top'
(Charles Baylis)
- in perf stat, make system wide (-a) the default option if no target
was specified and one of following conditions is met:
- no workload specified (current behaviour)
- a workload is specified but all requested events are system wide
ones, like uncore ones. (Jiri Olsa)
- ... plus lots of other updates, enhancements, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits)
perf tools: Fix the code to strip command name
tools arch x86: Sync cpufeatures.h
tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel
tools: Update asm-generic/mman-common.h copy from the kernel
perf tools: Use just forward declarations for struct thread where possible
perf tools: Add the right header to obtain PERF_ALIGN()
perf tools: Remove poll.h and wait.h from util.h
perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
perf tools: Remove stale prototypes from builtin.h
perf tools: Remove string.h from util.h
perf tools: Remove sys/ioctl.h from util.h
perf tools: Remove a few more needless includes from util.h
perf tools: Include sys/param.h where needed
perf callchain: Move callchain specific routines from util.[ch]
perf tools: Add compress.h for the *_decompress_to_file() headers
perf mem: Fix display of data source snoop indication
perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h
perf kvm: Make function only used by 'perf kvm' static
perf tools: Move timestamp routines from util.h to time-utils.h
perf tools: Move units conversion/formatting routines to separate object
...
|
||
|
Linus Torvalds
|
3527d3e951 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- another round of rq-clock handling debugging, robustization and
fixes
- PELT accounting improvements
- CPU hotplug related ->cpus_allowed affinity handling fixes all
around the tree
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
sched/x86: Update reschedule warning text
crypto: N2 - Replace racy task affinity logic
cpufreq/sparc-us2e: Replace racy task affinity logic
cpufreq/sparc-us3: Replace racy task affinity logic
cpufreq/sh: Replace racy task affinity logic
cpufreq/ia64: Replace racy task affinity logic
ACPI/processor: Replace racy task affinity logic
ACPI/processor: Fix error handling in __acpi_processor_start()
sparc/sysfs: Replace racy task affinity logic
powerpc/smp: Replace open coded task affinity logic
ia64/sn/hwperf: Replace racy task affinity logic
ia64/salinfo: Replace racy task affinity logic
workqueue: Provide work_on_cpu_safe()
ia64/topology: Remove cpus_allowed manipulation
sched/fair: Move the PELT constants into a generated header
sched/fair: Increase PELT accuracy for small tasks
sched/fair: Fix comments
sched/Documentation: Add 'sched-pelt' tool
sched/fair: Fix corner case in __accumulate_sum()
sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
...
|
||
Ludovic Barre
|
4ca41cb2ae |
dt-bindings: mtd: Document the STM32 QSPI bindings
This patch adds documentation of device tree bindings for the STM32 QSPI controller. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> |
||
|
Linus Torvalds
|
174ddfd5df |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement delivers:
- more year 2038 rework
- a massive rework of the arm achitected timer
- preparatory patches to allow NTP correction of clock event devices
to avoid early expiry
- the usual pile of fixes and enhancements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
arm64/arch_timer: Mark errata handlers as __maybe_unused
Clocksource/mips-gic: Remove redundant non devicetree init
MIPS/Malta: Probe gic-timer via devicetree
clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource: arm_arch_timer: simplify ACPI support code.
acpi/arm64: Add GTDT table parse driver
clocksource: arm_arch_timer: split MMIO timer probing.
clocksource: arm_arch_timer: add structs to describe MMIO timer
clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
clocksource: arm_arch_timer: refactor arch_timer_needs_probing
clocksource: arm_arch_timer: split dt-only rate handling
x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
um/time: Set ->min_delta_ticks and ->max_delta_ticks
tile/time: Set ->min_delta_ticks and ->max_delta_ticks
score/time: Set ->min_delta_ticks and ->max_delta_ticks
...
|
||
|
Linus Torvalds
|
3cb6653552 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "Nothing exciting from the irq side for this merge window: - a new driver for a Mediatek SoC - ACPI support for ARM GICV3 - support for shared nested interrupts - the usual pile of fixes and updates all over te place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/mbigen: Fix return value check in mbigen_device_probe() irqchip/mips-gic: Replace static map with dynamic irqchip/mips-gic: Remove device IRQ domain irqchip/mips-gic: Separate IPI reservation & usage tracking genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs genirq: Use cpumask_available() for check of cpumask variable cpumask: Add helper cpumask_available() irqchip/irq-imx-gpcv2: Clear OF_POPULATED flag irqchip/atmel-aic5: Handle suspend to RAM irqchip: Add Mediatek mtk-cirq driver dt-bindings: mtk-cirq: Add binding document irqchip/gic-v3-its: Add IORT hook for platform MSI support irqchip/mbigen: Add ACPI support irqchip/mbigen: Introduce mbigen_of_create_domain() irqchip/mbigen: Drop module owner platform-msi: Make platform_msi_create_device_domain() ACPI aware irqchip/gicv3-its: platform-msi: Scan MADT to create platform msi domain irqchip/gicv3-its: platform-msi: Refactor its_pmsi_init() to prepare for ACPI irqchip/gicv3-its: platform-msi: Refactor its_pmsi_prepare() irqchip/gic-v3-its: Keep the include header files in alphabetic order ... |
||
|
Linus Torvalds
|
2dbf3d5c32 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 removal from Hans-Christian Noren Egtvedt: "This will remove support for AVR32 architecture from the kernel and clean away the most obvious architecture related parts. Removing dead code in drivers is the next step" Notes from previous discussion about this: "The AVR32 architecture is not keeping up with the development of the kernel, and since it shares so much of the drivers with Atmel ARM SoC, it is starting to hinder these drivers to develop swiftly. Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now Microchip). Finally, the GCC toolchain is stuck at version 4.2.x, and has not received any patches since the last release from Atmel; 4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this toolchain is no longer able to properly link the network stack. Haavard and I have came to the conclusion that we feel keeping AVR32 on life support offers more obstacles for Atmel ARMs, than it gives joy to AVR32 users. I also suspect there are very few AVR32 users left today, if anybody at all" That discussion was acked by Andy Shevchenko, Boris Brezillon, Nicolas Ferre, and Haavard Skinnemoen. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: mm: remove AVR32 arch special handling in mm/Kconfig lib: remove check for AVR32 arch in test_user_copy lib: remove AVR32 entry in Kconfig.debug compile with frame pointers scripts: remove AVR32 support from checkstack.pl docs: remove all references to AVR32 architecture avr32: remove support for AVR32 architecture |
||
|
Linus Torvalds
|
5fab10041b |
Merge tag 'devprop-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull generic device properties framework updates from Rafael Wysocki:
"These add support for the ports and endpoints concepts, based on the
existing DT support for them, to the generic device properties
framework and update the ACPI _DSD properties code to recognize ports
and endpoints accordingly.
Specifics:
- Extend the ACPI _DSD properties code and the generic device
properties framework to support the concept of remote endponts
(Mika Westerberg, Sakari Ailus).
- Document the support for ports and endpoints in _DSD properties and
extend the generic device properties framework to make it more
suitable for the handling of ports and endpoints (Sakari Ailus)"
* tag 'devprop-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Read strings using string array reading functions
device property: fwnode_property_read_string_array() returns nr of strings
device property: Fix reading pset strings using array access functions
device property: fwnode_property_read_string_array() may return -EILSEQ
ACPI / DSD: Document references, ports and endpoints
device property: Add fwnode_get_next_parent()
device property: Add support for fwnode endpoints
device property: Make dev_fwnode() public
of: Add of_fwnode_handle() to convert device nodes to fwnode_handle
device property: Add fwnode_handle_get()
device property: Add support for remote endpoints
ACPI / property: Add support for remote endpoints
device property: Add fwnode_get_named_child_node()
ACPI / property: Add fwnode_get_next_child_node()
device property: Add fwnode_get_parent()
ACPI / property: Add possiblity to retrieve parent firmware node
|
||
|
Linus Torvalds
|
08be881064 |
Merge tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are some device enumeration code changes, updates of the AC and
battery drivers to help them avoid attaching to devices that cannot be
handled by them, new operation region driver for the Intel CHT Whiskey
Cove PMIC, new sysfs entries for CPPC performance capabilities, a new
_REV quirk blacklist entry and a couple of assorted minor fixes and
cleanups.
Specifics:
- Update the core device enumeration code to make it more internally
consistent and robust and drop the force_remove sysfs attribute
that could be used to tell it to ignore errors on device
hot-removal which was dangerous in general and no real and still
relevant use cases for it could be found (Rafael Wysocki, Michal
Hocko).
- Make the core device enumeration code use _PXM to associate
platform devices created by it with specific NUMA nodes (Shanker
Donthineni).
- Extend the CPPC library by adding more sysfs entries for
performance capabilities to it and making it use the lowest
nonlinear performance parameter (Prashanth Prakash).
- Make the CPU online more consistent with CPU initialization in the
ACPI processor driver (Prashanth Prakash).
- Update the AC and battery drivers to help them avoid attaching to
devices that cannot be handled by them and update the
axp288_charger power supply driver to work correctly on ACPI
systems without the INT3496 device (Hans de Goede).
- Add an ACPI operation region driver for the Intel CHT Whiskey Cove
PMIC and update the xpower operation region driver to work without
IIO which isn't really necessary for it to work (Hans de Goede).
- Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
(Kai Heng Feng).
- Make the code in the ACPI video driver easier to follow by adding
symbols and comments to it (Dmitry Frank).
- Update ACPI documentation and drop a function that has no users
from the tables-handling code (Cao jin, Baoquan He)"
* tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
ACPI / scan: Avoid enumerating devices more than once
ACPI / scan: Apply default enumeration to devices with ACPI drivers
power: supply: axp288_charger: Only wait for INT3496 device if present
ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
ACPI / utils: Add new acpi_dev_present helper
ACPI / video: add comments about subtle cases
ACPI / video: get rid of magic numbers and use enum instead
ACPI / doc: linuxized-acpica.txt: fix typos
ACPI / blacklist: add _REV quirk for Dell Inspiron 7537
ACPI / tables: Drop acpi_parse_entries() which is not used
ACPI / CPPC: add sysfs entries for CPPC perf capabilities
ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()
ACPI / platform: Update platform device NUMA node based on _PXM method
ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()
ACPI / scan: Drop support for force_remove
|
||
|
Linus Torvalds
|
0e285e9088 |
Merge tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This time the majority of changes go to the cpufreq subsystem (and to
the intel_pstate driver in particular) and there are some updates in
the generic power domains framework, cpuidle, tools and a couple of
other places.
One thing worth mentioning is that the intel_pstate's sysfs interface
has been reworked to be more consistent with the general expectations
of the cpufreq core and less confusing, hopefully for the better.
Also, we have a new cpufreq driver for Tegra186 and new hardware
support in intel_pstata and the Mediatek cpufreq driver.
Apart from that, the AnalyzeSuspend utility for system suspend
profiling gets a companion called AnalyzeBoot for the analogous
profiling of system boot and they both go into one place under
tools/power/pm-graph/.
The rest is mostly fixes, cleanups and code reorganization.
Specifics:
- Rework the intel_pstate driver's sysfs interface to make it more
straightforward and more intuitive (Rafael Wysocki).
- Make intel_pstate support all processors which advertise HWP
(hardware-managed P-states) to the kernel in all operation modes
and make it use the load-based P-state selection algorithm on a
wider range of systems in the active mode (Rafael Wysocki).
- Add cpufreq driver for Tegra186 (Mikko Perttunen).
- Add support for Gemini Lake SoCs to intel_pstate (David Box).
- Add support for MT8176 and MT817x to the Mediatek cpufreq driver
and clean up that driver a bit (Daniel Kurtz).
- Clean up intel_pstate and optimize it slightly (Rafael Wysocki).
- Update the schedutil cpufreq governor, mostly to fix a couple of
issues with it related to specific workloads, and rework its sysfs
tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).
- Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
(Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
YuanTian Tang).
- Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
Uytterhoeven).
- Add support for "always on" power domains to the genpd (generic
power domains) framework and clean up that code somewhat (Ulf
Hansson, Lina Iyer, Viresh Kumar).
- Fix minor issues in the powernv cpuidle driver and clean it up
(Anton Blanchard, Gautham Shenoy).
- Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add
an analogous boot-profiling utility called AnalyzeBoot to it (Todd
Brandt).
- Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
Scaling) driver (David Wu).
- Fix minor issues in the cpuidle core, the intel_pstate_tracer
utility, the devfreq framework and the PM core documentation
(Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)"
* tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
PM / runtime: Document autosuspend-helper side effects
PM / runtime: Fix autosuspend documentation
tools: power: pm-graph: Package makefile and man pages
tools: power: pm-graph: AnalyzeBoot v2.0
tools: power: pm-graph: AnalyzeSuspend v4.6
cpufreq: Add Tegra186 cpufreq driver
cpufreq: imx6q: Fix error handling code
cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
cpuidle: powernv: Don't continually set thread priority in snooze_loop()
cpuidle: powernv: Don't bounce between low and very low thread priority
cpuidle: cpuidle-cps: remove unused variable
tools/power/x86/intel_pstate_tracer: Adjust directory ownership
cpufreq: schedutil: Use policy-dependent transition delays
cpufreq: schedutil: Reduce frequencies slower
PM / devfreq: Move struct devfreq_governor to devfreq directory
PM / Domains: Ignore domain-idle-states that are not compatible
cpufreq: intel_pstate: Add support for Gemini Lake
powernv-cpuidle: Validate DT property array size
...
|