The qemu-cmd file can contain comments that are not relevant to the
operation of kvm-recheck-lock.sh. This commit therefore strips these
comments before looking for timing information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The qemu-cmd file can contain comments that are not relevant to the
operation of kvm-recheck-scf.sh. This commit therefore strips these
comments before looking for timing information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, each -kcsan run in a torture.sh group of runs has its own
kcsan.sum summary. This works, but there is usually a lot of duplication
between the runs. This commit therefore also creates an overall kcsan.sum
file for the entire torture.sh run, if there was at least one -kcsan run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kcsan-collapse.sh script assumes that it is being run over the output
of a single kvm.sh run, which is less than helpful for torture.sh runs.
This commit therefore changes the kcsan-collapse.sh script's "ls" pattern
with a "find" command to enable a KCSAN summary across all the -kcsan
runs in a full torture.sh run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh accepts --doall on the one hand and --do-none
on the other, which is a bit inconsistent. This commit therefore adds
--do-all and --donone so that a fully consistent test may be used.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds three short tests of the clocksource-watchdog capability
to the torture.sh script, all to avoid otherwise-inevitable bitrot.
While in the area, fix an obsolete comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When run test_tc_tunnel.sh, it complains following error
ipip
encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100
test basic connectivity
nc: cannot use -p and -l
nc man page has:
-l Listen for an incoming connection rather than initiating
a connection to a remote host.Cannot be used together with
any of the options -psxz. Additionally, any timeouts specified
with the -w option are ignored.
Correct nc in server_listen().
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210719223022.66681-1-vincent.mc.li@gmail.com
Allow users to implement shorter delays than a full second by implementing
msleep().
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Simple functional test for the newly exposed features.
Also add an optional stress test for the channel number
update under flood.
RFC v1 -> RFC v2:
- add the stress test
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case to check whether an unsuccessful creation of an outer
map of a BTF-defined map-in-map destroys the inner map.
As bpf_object__create_map() is a static function, we cannot just call it
from the test case and then check whether a map accessible via
map->inner_map_fd has been closed. Instead, we iterate over all maps and
check whether the map "$MAP_NAME.inner" does not exist.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-3-m@lambda.lt
If creating an outer map of a BTF-defined map-in-map fails (via
bpf_object__create_map()), then the previously created its inner map
won't be destroyed.
Fix this by ensuring that the destroy routines are not bypassed in the
case of a failure.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-2-m@lambda.lt
KVM/arm64 fixes for 5.14, take #1
- Fix MTE shared page detection
- Fix selftest use of obsolete pthread_yield() in favour of sched_yield()
- Enable selftest's use of PMU registers when asked to
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de23 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
You can now use it in all perf tools, such as:
perf record -e probe:schedule -aR sleep 1
# perf probe -l
probe:schedule (on schedule@kernel/sched/core.c)
# perf record -e probe:schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
# perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1K of event 'probe:schedule'
# Event count (approx.): 1366
#
# Overhead Command Shared Object Symbol
# ........ ............... ................. ............
#
6.22% migration/0 [kernel.kallsyms] [k] schedule
6.22% migration/1 [kernel.kallsyms] [k] schedule
6.22% migration/2 [kernel.kallsyms] [k] schedule
6.22% migration/3 [kernel.kallsyms] [k] schedule
6.15% migration/10 [kernel.kallsyms] [k] schedule
6.15% migration/11 [kernel.kallsyms] [k] schedule
6.15% migration/12 [kernel.kallsyms] [k] schedule
6.15% migration/13 [kernel.kallsyms] [k] schedule
6.15% migration/14 [kernel.kallsyms] [k] schedule
6.15% migration/15 [kernel.kallsyms] [k] schedule
6.15% migration/4 [kernel.kallsyms] [k] schedule
6.15% migration/5 [kernel.kallsyms] [k] schedule
6.15% migration/6 [kernel.kallsyms] [k] schedule
6.15% migration/7 [kernel.kallsyms] [k] schedule
6.15% migration/8 [kernel.kallsyms] [k] schedule
6.15% migration/9 [kernel.kallsyms] [k] schedule
0.22% rcu_sched [kernel.kallsyms] [k] schedule
...
#
# (Cannot load tips.txt file, please install perf!)
#
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull kunit fixes from Shuah Khan:
"Fixes to kunit tool and documentation:
- fix asserts on older python versions
- fixes to misleading error messages when TAP header format is
incorrect or when file is missing
- documentation fix: drop obsolete information about uml_abort
coverage
- remove unnecessary annotations"
* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Assert the version requirement
kunit: tool: remove unnecessary "annotations" import
Documentation: kunit: drop obsolete note about uml_abort for coverage
kunit: tool: Fix error messages for cases of no tests and wrong TAP header
Pull kselftest fix from Shuah Khan:
"A fix to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl"
* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
__s64 can be defined as either long or long long, depending on the
architecture. On ppc64le it's defined as long, giving this error:
In file included from btf_dump.c:22:
btf_dump.c: In function 'btf_dump_type_data_check_overflow':
libbpf_internal.h:111:22: error: format '%lld' expects argument of
type 'long long int', but argument 3 has type '__s64' {aka 'long int'}
[-Werror=format=]
111 | libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~
libbpf_internal.h:114:27: note: in expansion of macro '__pr'
114 | #define pr_warn(fmt, ...) __pr(LIBBPF_WARN, fmt, ##__VA_ARGS__)
| ^~~~
btf_dump.c:1992:3: note: in expansion of macro 'pr_warn'
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ^~~~~~~
btf_dump.c:1992:32: note: format string is defined here
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ~~~^
| |
| long long int
| %ld
Cast to size_t and use %zu instead.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-3-git-send-email-alan.maguire@oracle.com
If data is packed, data structures can store it outside of usual
boundaries. For example a 4-byte int can be stored on a unaligned
boundary in a case like this:
struct s {
char f1;
int f2;
} __attribute((packed));
...the int is stored at an offset of one byte. Some platforms have
problems dereferencing data that is not aligned with its size, and
code exists to handle most cases of this for BTF typed data display.
However pointer display was missed, and a simple function to test if
"ptr_is_aligned(data, data_sz)" would help clarify this code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-2-git-send-email-alan.maguire@oracle.com
Test various type data dumping operations by comparing expected
format with the dumped string; an snprintf-style printf function
is used to record the string dumped. Also verify overflow handling
where the data passed does not cover the full size of a type,
such as would occur if a tracer has a portion of the 8k
"struct task_struct".
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626362126-27775-4-git-send-email-alan.maguire@oracle.com
Add a BTF dumper for typed data, so that the user can dump a typed
version of the data provided.
The API is
int btf_dump__dump_type_data(struct btf_dump *d, __u32 id,
void *data, size_t data_sz,
const struct btf_dump_type_data_opts *opts);
...where the id is the BTF id of the data pointed to by the "void *"
argument; for example the BTF id of "struct sk_buff" for a
"struct skb *" data pointer. Options supported are
- a starting indent level (indent_lvl)
- a user-specified indent string which will be printed once per
indent level; if NULL, tab is chosen but any string <= 32 chars
can be provided.
- a set of boolean options to control dump display, similar to those
used for BPF helper bpf_snprintf_btf(). Options are
- compact : omit newlines and other indentation
- skip_names: omit member names
- emit_zeroes: show zero-value members
Default output format is identical to that dumped by bpf_snprintf_btf(),
for example a "struct sk_buff" representation would look like this:
struct sk_buff){
(union){
(struct){
.next = (struct sk_buff *)0xffffffffffffffff,
.prev = (struct sk_buff *)0xffffffffffffffff,
(union){
.dev = (struct net_device *)0xffffffffffffffff,
.dev_scratch = (long unsigned int)18446744073709551615,
},
},
...
If the data structure is larger than the *data_sz*
number of bytes that are available in *data*, as much
of the data as possible will be dumped and -E2BIG will
be returned. This is useful as tracers will sometimes
not be able to capture all of the data associated with
a type; for example a "struct task_struct" is ~16k.
Being able to specify that only a subset is available is
important for such cases. On success, the amount of data
dumped is returned.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626362126-27775-2-git-send-email-alan.maguire@oracle.com
Add several test cases for checking update_alu_sanitation_state() under
multiple paths:
# ./test_verifier
[...]
#1061/u map access: known scalar += value_ptr unknown vs const OK
#1061/p map access: known scalar += value_ptr unknown vs const OK
#1062/u map access: known scalar += value_ptr const vs unknown OK
#1062/p map access: known scalar += value_ptr const vs unknown OK
#1063/u map access: known scalar += value_ptr const vs const (ne) OK
#1063/p map access: known scalar += value_ptr const vs const (ne) OK
#1064/u map access: known scalar += value_ptr const vs const (eq) OK
#1064/p map access: known scalar += value_ptr const vs const (eq) OK
#1065/u map access: known scalar += value_ptr unknown vs unknown (eq) OK
#1065/p map access: known scalar += value_ptr unknown vs unknown (eq) OK
#1066/u map access: known scalar += value_ptr unknown vs unknown (lt) OK
#1066/p map access: known scalar += value_ptr unknown vs unknown (lt) OK
#1067/u map access: known scalar += value_ptr unknown vs unknown (gt) OK
#1067/p map access: known scalar += value_ptr unknown vs unknown (gt) OK
[...]
Summary: 1762 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP and other connection oriented sockets have accept()
for each incoming connection on the server side, hence
they can just insert those fd's from accept() to sockmap,
which are of course established.
Now with datagram sockets begin to support sockmap and
redirection, the restriction is no longer applicable to
them, as they have no accept(). So we have to lift this
restriction for them. This is fine, because inside
bpf_sk_redirect_map() we still have another socket status
check, sock_map_redirect_allowed(), as a guard.
This also means they do not have to be removed from
sockmap when disconnecting.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210704190252.11866-3-xiyou.wangcong@gmail.com
kprobes can be placed on most instructions in a function, not
just entry, and ftrace and bpftrace support the function+offset
notification for probe placement. Adding parsing of func_name
into func+offset to bpf_program__attach_kprobe() allows the
user to specify
SEC("kprobe/bpf_fentry_test5+0x6")
...for example, and the offset can be passed to perf_event_open_probe()
to support kprobe attachment.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-8-jolsa@kernel.org
Adding bpf_program__attach_kprobe_opts that does the same
as bpf_program__attach_kprobe, but takes opts argument.
Currently opts struct holds just retprobe bool, but we will
add new field in following patch.
The function is not exported, so there's no need to add
size to the struct bpf_program_attach_kprobe_opts for now.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-7-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs,
so it's now possible to call bpf_get_func_ip from both kprobe and
kretprobe programs.
Taking the caller's address from 'struct kprobe::addr', which is
defined for both kprobe and kretprobe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
Andrii Nakryiko says:
====================
pull-request: bpf 2021-07-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 37 insertions(+), 15 deletions(-).
The main changes are:
1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and
BPF_XDP_CPUMAP programs, from Xuan Zhuo.
2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo.
3) Follow-up fix to subprog poke descriptor use-after-free problem, from
Daniel Borkmann and John Fastabend.
4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King.
5) Fix memory leak in BPF sockmap, from John Fastabend.
6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend
and Jakub Sitnicki.
7) Fix NULL pointer dereference in bpftool, from Tobias Klauser.
8) AF_XDP documentation fixes, from Baruch Siach.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The first of these leaks is related to struct trace fields never being
deallocated.
This patch adds the function trace__exit, which is called at the end of
cmd_trace, replacing the existing deallocation, which is now moved
inside the new function.
This function deallocates:
- ev_qualifier
- ev_qualifier_ids.entries
- syscalls.table
- sctbl
- perfconfig_events
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/de5945ed5c0cb882cbfa3268567d0bff460ff016.1626343282.git.rickyman7@gmail.com
[ Removed needless initialization to zero, missing named initializers are zeroed by the compiler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
