Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
DP v1.1+ says:
"The DisplayPort transmitter, which is the driving end for a request
transaction, pre-charges the AUX-CH+ and AUX-CH- to a common mode
voltage by transmitting 10 to 16 consecutive 0’s in Manchester II code.
After the active pre-charge, the transmitter sends an AUX Sync pattern.
The AUX Sync pattern must be as follows:
Start with 16 consecutive 0s in Manchester-II code, which results in
a transition from low to high in the middle of each bit period.
Including active pre-charge pulses, there shall be 26 to 32
consecutive 0s before the end of the AUX_SYNC pattern."
BDW bspec says:
"Used to determine the precharge time for the Aux Channel. During this
time the Aux Channel will drive the SYNC pattern. Every microsecond
gives one additional SYNC pulse beyond the hard coded 26 SYNC pulses.
The value is the number of microseconds times 2. Default is 3 decimal
which gives 6us of precharge which is 6 extra SYN pulses for a total
of 32."
CPT bspec says the same thing apart from:
"... Default is 5 decimal which gives 10us of precharge which is 10
extra SYNC pulses for a total of 36."
So it looks like to match the max of 32 of the DP spec we should just
always program this extra precharge time to 3.
Unfortunately g4x/ibx bspec doesn't have this clarification, but
since the cpt default was still the same 5 as for g4x/ibx let's
assume the behaviour was always the same.
I also did a bit more archaeology and found the following:
commit e3421a1894 ("drm/i915: enable DP/eDP for Sandybridge/Cougarpoint")
added the precharge==3 for snb
commit 092945e11c ("drm/i915/dp: Use auxch precharge value of 5 everywhere")
tried to change it to be 5 for snb
commit 6b4e0a93ff ("Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"")
went back to 3 for snb due to a regression
So I think the value of 5 was just always wrong, but I guess very
few display actually get upset if we do too many SYNCs. Also DP 1.0
did not specify any max value for this, whereas DP 1.1+ added the
max==32 wording.
Additionally I hooked up a scope to a few machines with the following
findings:
- ibx and cpt both give us the expected 32 total sync pulses with
precharge==3
- ctg is a bit different, it has the 10 hardcoded precharge sync
pulses same as later platforms (so we get at least 26 sync
pulses in total). However the additional precharge length (which
is what we're changing here) is not done with sync pulses.
Instead ctg does this part of the precharge with a steady DC
voltage. If we wanted to 100% match DP 1.1+ here we should perhaps
set prechange length to 0, but less precharge might make AUX less
reliable, and so far we're not aware of any problems due to the DC
precharge. Hence I think precharge==3 is probably the best choice
here too to make the total length of precharge consistent with
the later platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318181039.17260-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Next step in the conversion, move everything in drm_dp_dual_mode_helper.c
over to using drm_err() and drm_dbg_kms(). This was done using the
following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(dev, expr);
)
And correcting the indentation of the resulting code by hand.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-17-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that we've added a back-pointer to drm_device to drm_dp_aux, made
drm_dp_aux available to any functions in drm_dp_helper.c which need to
print to the kernel log, and ensured all of our logging uses a consistent
format, let's do the final step of the conversion and actually move
everything over to using drm_err() and drm_dbg_*().
This was done by using the following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(aux->drm_dev, expr);
|
- DRM_DEBUG_DP(expr);
+ drm_dbg_dp(aux->drm_dev, expr);
|
- DRM_DEBUG_ATOMIC(expr);
+ drm_dbg_atomic(aux->drm_dev, expr);
|
- DRM_DEBUG_KMS_RATELIMITED(expr);
+ drm_dbg_kms_ratelimited(aux->drm_dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(aux->drm_dev, expr);
)
Followed by correcting the resulting line-wrapping in the results by hand.
v2:
* Fix indenting in drm_dp_dump_access
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-16-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll
need to be able to access the DRM device in the dual mode DP helpers as
well. Note however that since drm_dp_dual_mode_detect() can be called with
DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down
the drm_device to these functions instead of using drm_dp_aux.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-9-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly
correct, except for the fact that they made the assumption that all AUX
devices were grandchildren of their respective DRM devices. This is the
case for most normal GPUs, but is almost never the case with SoCs and
display bridges. So, let's fix this documentation to clarify when the right
time to use drm_dp_aux_init() or drm_dp_aux_register() is.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-5-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Kconfig dependency is incomplete since DRM_I915_GVT is a 'bool'
symbol that depends on the 'tristate' VFIO_MDEV. This allows a
configuration with VFIO_MDEV=m, DRM_I915_GVT=y and DRM_I915=y that
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `available_instances_show':
gvt.c:(.text+0x67a): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x6a5): undefined reference to `mtype_get_type_group_id'
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `description_show':
gvt.c:(.text+0x76e): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x799): undefined reference to `mtype_get_type_group_id'
Clarify the dependency by specifically disallowing the broken
configuration. If VFIO_MDEV is built-in, it will work, but if
VFIO_MDEV=m, the i915 driver cannot be built-in here.
Fixes: 07e543f4f9 ("vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV")
Fixes: 9169cff168 ("vfio/mdev: Correct the function signatures for the mdev_type_attributes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Message-Id: <20210422133547.1861063-1-arnd@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
Our initial logic for excluding dma-bufs was not quite right. In
particular we want msm_gem_get/put_pages() path used for exported
dma-bufs to increment/decrement the pin-count.
Also, in case the importer is vmap'ing the dma-buf, we need to be
sure to update the object's status, because it is now no longer
potentially evictable.
Fixes: 63f17ef834 drm/msm: Support evicting GEM objects to swap
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210426235326.1230125-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.
Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com
On bochs DRM driver, the execution of "setterm --blank force" results
in a frozen screen instead of a blank screen. It's due to the lack of
the screen blanking support in its code.
Actually, the QEMU bochs vga side can switch to the blanking mode when
the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates
ar_index in QEMU side. So, essentially, we'd just need to clear the
bit at pipe disable callback; that's what this patch does essentially.
However, a tricky part is that the access via VGA_ATT_IW is done in
"flip-flop"; the first write is for index and the second write is for
the data like palette. Meanwhile, in the current bochs DRM driver,
the flip-flop wasn't considered, and it calls only the register update
once with the value 0x20.
The spec and the actual VGA implementation in QEMU suggests that the
flip flop flag is discarded by reading the CRTC index register
(VGA_IS1_RC, 0x3da). So, in this patch, we add the helper to read a
byte and the call to clear the flip flop flag before changing the
blank / unblank setup via VGA_ATT_IW register.
v1->v2:
* discard ar_flip_flop by reading 0x3da, add bochs_vga_readb()
* include video/vga.h for VGA register definitions
* move the blank/unblank code to bochs_hw_blank()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421080859.14869-1-tiwai@suse.de
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
