Pull MMC fixes from Ulf Hansson
"MMC core:
- Clear flags before allowing to retune
MMC host:
- sdhci: Clear unused bounce buffer at DMA mmap error path
- sdhci: Fix warning message when accessing RPMB in HS400 mode
- sdhci-of-arasan: Use clock-frequency property to update clk_xin
- mtk-sd: Fixup compatible string for MT8195"
* tag 'mmc-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
dt-bindings: mmc: change compatiable string for MT8195 mmc host IP
mmc: sdhci: Clear unused bounce buffer at DMA mmap error path
phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP
mmc: sdhci-of-arasan: Use clock-frequency property to update clk_xin
mmc: core: clear flags before allowing to retune
Pull devicetree updates from Rob Herring:
- Refine reserved memory nomap handling
- Merge some PCI and non-PCI address handling implementations
- Simplify of_address.h header ifdefs
- Improve printk handling of some 64-bit types
- Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
to DT schema
- Convert mux and mux controller bindings to schema. This includes MDIO
IIO, and I2C muxes.
- Add Arm PL031 RTC binding schema
- Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd
- Fix some stale doc references
- Remove stale property-units.txt. Superseded by schema in dt-schema
repo.
- Fixes for 'unevaluatedProperties' handling (enabled with experimental
json-schema support)
- Drop redundant usage of minItems and maxItems across the tree
- Update some examples to use bindings with a schema
* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
dt-bindings: display: renesas,du: Fix 'ports' reference
dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
dt-bindings: crypto: ccree: Convert to json-schema
dt-bindings: fpga: zynq: convert bindings to YAML
dt-bindings: rtc: zynqmp: convert bindings to YAML
dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
of: of_reserved_mem: mark nomap memory instead of removing
of: of_reserved_mem: only call memblock_free for normal reserved memory
dt-bindings: Drop redundant minItems/maxItems
dt-bindings: spmi: Correct 'reg' schema
of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
dt-bindings: clk: vc5: Fix example
dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
of: Remove superfluous casts when printing u64 values
of: Fix truncation of memory sizes on 32-bit platforms
dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
dt-bindings: pwm: Use examples with documented/matching schema
...
MT8195 mmc host IP is compatible with MT8183, and currently it shows:
properties:
compatible:
oneOf:
...
- items:
- const: mediatek,mt8192-mmc
- const: mediatek,mt8195-mmc
- const: mediatek,mt8183-mmc
which means the compatible string in the device tree would be:
compatible = "mediatek,mt8192-mmc", "mediatek,mt8195-mmc",
"mediatek,mt8183-mmc";
The bindings is wrong and that isn't the result we want.
instead we want:
properties:
compatible:
oneOf:
...
- items:
- const: mediatek,mt8192-mmc
- const: mediatek,mt8183-mmc
- items:
- const: mediatek,mt8195-mmc
- const: mediatek,mt8183-mmc
which would give us:
compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
and
compatible = "mediatek,mt8195-mmc", "mediatek,mt8183-mmc";
Fixes: eb9cb7227e (dt-bindings: mmc: Add compatible for Mediatek MT8195)
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1623726033-16073-2-git-send-email-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The "sdhci" compatible is not documented though used as a fallback in a
few cases. It is also not supported by a Linux driver. Just remove the
example as part of ridding examples of undocumented bindings.
The "brcm,bcm43xx-fmac" compatible is also not documented. Update the
example to use one of the correct ones, "brcm,bcm4329-fmac", instead and
use a device class based nodename.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210519153712.3146025-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
HS400 requires a data strobe line in addition to the usual MMC signal
lines. If a board design neglects to wire up this signal, HS400 mode is
not available, even if both the controller and the eMMC are claiming to
support this mode. Add a DT flag to allow boards to disable the HS400
support in this case.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210510190400.105162-1-l.stach@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit 7c7905df68 ("dt-bindings: mmc: sdhci-am654: fix compatible
for j7200") switched the compatible property from a regular enum to an
more appropriate combinatorial oneOf convention, and in the process has
introduced a duplicate ti,j721e-sdhci-4bit.
This generated the following warning on J721E boards that use the
ti,j721e-sdhci-4bit for two nodes:
"mmc@4fb0000: compatible: More than one condition true in oneOf schema"
"mmc@4f98000: compatible: More than one condition true in oneOf schema"
Remove the duplicate to fix this.
Fixes: 7c7905df68 ("dt-bindings: mmc: sdhci-am654: fix compatible for j7200")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210428230500.19214-1-s-anna@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
On TI J7200 SoC the SDHCI controller compatible defined as
"ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit"
or
"ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit"
which causes dtbs_check warnings:
mmc@4f80000: compatible: ['ti,j7200-sdhci-8bit', 'ti,j721e-sdhci-8bit'] is too long
mmc@4f80000: compatible: Additional items are not allowed ('ti,j721e-sdhci-8bit' was unexpected)
mmc@4fb0000: compatible:0: 'ti,j7200-sdhci-4bit' is not one of ['ti,am654-sdhci-5.1', 'ti,j721e-sdhci-8bit',
'ti,j721e-sdhci-4bit', 'ti,j7200-sdhci-8bit', 'ti,j721e-sdhci-4bit', 'ti,am64-sdhci-8bit', 'ti,am64-sdhci-4bit']
mmc@4fb0000: compatible: ['ti,j7200-sdhci-4bit', 'ti,j721e-sdhci-4bit'] is too long
mmc@4fb0000: compatible: Additional items are not allowed ('ti,j721e-sdhci-4bit' was unexpected)
Fix it by adding missing compatible strings and their combinations.
Fixes: 407d0c2cdd ("dt-bindings: mmc: sdhci-am654: Convert sdhci-am654 controller documentation to json schema")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210115193218.5809-1-grygorii.strashko@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Another round of wack-a-mole. The json-schema default is additional
unknown properties are allowed, but for DT all properties should be
defined.
Signed-off-by: Rob Herring <robh@kernel.org>
