Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, the bulk of work in the SoC tree goes into DT files, this
time with a roughly even split between 32-bit and 64-bit SoCs rather
than the usual mostly 64-bit changes.
New SoCs:
- Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
platform based on the older SAMA5 series.
- Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
phone SoCs.
- Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
SoCs.
New boards:
- Marvell CN913x reference boards
- ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
and Fuji server boards.
- Snapdragon 665 based Sony Xperia 10II
- Snapdragon MSM8916 based Xiaomi Redmi 2
- Snapdragon MSM8226 based Samsung Galaxy S3 Neo
- NXP i.MX based 32-bit boards:
- DHCOM based PicoITX
- DHSOM based DRC0ỉ
- SolidRun SolidSense
- SKOV i.MX6 boards.
- NXP i.MX based 64-bit boards:
- Nitrogen8 SoM and MNT Reform2
- LS1088A based Traverse Ten64
- i.MX8M based GW7902.
- NVIDIA Jetson TX2 NX Developer Kit
- 4KOpen STiH418-b2264 development board
- ux500 based Samsung phones: Gavini, Codina and Kyle
- TI AM335x based Sancloud BBE Lite
- ixp4xx dts files to replace all old board files
Other changes:
- Treewide fixes for dtc warnings
- Rockchips i/o domain support
- TI OMAP/AM3 CPSW switch driver support
- Improved device support for allwinner, aspeed, qualcomm, NXP,
nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
OMAP and actions"
* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
ARM: dts: rockchip: Add SFC to RV1108
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
dt-bindings: vendor-prefixes: add Traverse Technologies
arm64: dts: add device tree for Traverse Ten64 (LS1088A)
arm64: dts: ls1088a: add missing PMU node
arm64: dts: ls1088a: add internal PCS for DPMAC1 node
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
arm64: dts: imx8mq-reform2: add sound support
arm64: dts: imx8m: drop interrupt-affinity for pmu
arm64: dts: imx8qxp: update pmu compatible
arm64: dts: imx8mm: update pmu compatible
...
The i.MX8MM integrates a CSI bridge IP core, as the i.MX7. There seems
to be no difference between the two SoCs according to the reference
manual, but as documentation may not be accurate, add a compatible
string for the i.MX8MM, with a fallback on the compatible i.MX7.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Captured NTSC video would be out of sync when using the adv7280 with
the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) need to
be configured properly to ensure BT.656-4 compatibility.
Introduce the 'adv,force-bt656-4' property to allow the ADV7280
behavior to be consistent with the ADV7180, where BT.656-4 timing
is used by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add two more compatibles: "nxp,imx8qm-jpgdec" and " nxp,imx8qm-jpgenc".
Also update the compatible property to ensure mutually exclusive usage of
encoder and decoder compatibles.
Update examples.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull devicetree updates from Rob Herring:
- Refine reserved memory nomap handling
- Merge some PCI and non-PCI address handling implementations
- Simplify of_address.h header ifdefs
- Improve printk handling of some 64-bit types
- Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
to DT schema
- Convert mux and mux controller bindings to schema. This includes MDIO
IIO, and I2C muxes.
- Add Arm PL031 RTC binding schema
- Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd
- Fix some stale doc references
- Remove stale property-units.txt. Superseded by schema in dt-schema
repo.
- Fixes for 'unevaluatedProperties' handling (enabled with experimental
json-schema support)
- Drop redundant usage of minItems and maxItems across the tree
- Update some examples to use bindings with a schema
* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
dt-bindings: display: renesas,du: Fix 'ports' reference
dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
dt-bindings: crypto: ccree: Convert to json-schema
dt-bindings: fpga: zynq: convert bindings to YAML
dt-bindings: rtc: zynqmp: convert bindings to YAML
dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
of: of_reserved_mem: mark nomap memory instead of removing
of: of_reserved_mem: only call memblock_free for normal reserved memory
dt-bindings: Drop redundant minItems/maxItems
dt-bindings: spmi: Correct 'reg' schema
of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
dt-bindings: clk: vc5: Fix example
dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
of: Remove superfluous casts when printing u64 values
of: Fix truncation of memory sizes on 32-bit platforms
dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
dt-bindings: pwm: Use examples with documented/matching schema
...
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
Document the RK3228 compatible for rockchip-vdec.
Also add the optional assigned-clocks and assigned-clock-rates
properties.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add compatibles for RK3036, RK3066, RK3188 and RK3228. Also reflect the
changes to the additional clocks for RK3066/RK3188.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The mt8192 iommu support 0~16GB iova. We separate it to four banks:
0~4G; 4G~8G; 8G~12G; 12G~16G.
The "dma-ranges" could be used to adjust the bank we locate.
If we don't set this property. The default range always is 0~4G.
This is optional and only needed in mt8192, the dma ranges should
not cross 4G/8G/12G.
Here we don't have actual bus/parent concept here. And the iova
requirement is for our HW. Thus put the property in our node.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is an NEC remote control device shipped with some Toshiba TVs.
Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document support for the VIN module in the Renesas V3U (r8a779a0) SoC.
The V3U is different from other SoCs as it have 32 instead of 8 (most of
Gen3) or 16 (V3H) VIN instances. The VIN instances are also connected to
a new IP the R-Car ISP Channel Selector.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for Renesas R-Car ISP Channel Selector IP. The ISP is
responsible for filtering the MIPI CSI-2 bus and directing the different
CSI-2 virtual channels to different R-Car VIN instances (DMA engines)
for capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
The i.MX8MM integrates a newer version of the CSIS CSI-2 receiver as the
i.MX7 family. Differences in integration are are:
- An additional clock is required
- Up to 4 data lanes are supported
- No reset or PHY supply is present
Support it in the DT binding.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
Add the obvious compatible name to the existing IR binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.
On the way use enums to group all compatible devices together.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Updates binding document since the avc and vp8 hardware encoder in
MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
"mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc".
This patch is not a compatible change, but we must do this modifaction
because MediaTek IOMMU add the device_link between the smi-larb
device and venc_device, if the venc device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
There is a bit of backward compatibility for avc encoder, the avc
encoder device node still has compatible "mediatek,mt8173-vcodec-enc".
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
