I didn't find any use of this macro in the current kernel tree (with git
grep). KTHREAD_SIZE is no longer used for a very very long time. So
let's remove this definition.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The call to kvm_put_kvm was removed from error handling in commit
506cfba9e7 ("KVM: don't use anon_inode_getfd() before possible
failures"), but it is _not_ a memory leak. Reuse Al's explanation
to avoid that someone else makes the same mistake.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the TX data path, prepend a special metadata ethertype which
instructs the hardware to perform cryptography.
In addition, fill Software-Parser segment in TX descriptor so
that the hardware may parse the ESP protocol, and perform TX
checksum offload on the inner payload.
Support GSO, by providing the inverse of gso_size in the metadata.
This allows the FPGA to update the ESP header (seqno and seqiv) on the
resulting packets, by calculating the packet number within the GSO
back from the TCP sequence number.
Note that for GSO SKBs, the stack does not include an ESP trailer,
unlike the non-GSO case.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In RX data path, the hardware prepends a special metadata ethertype
which indicates that the packet underwent decryption, and the result of
the authentication check.
Communicate this to the stack in skb->sp.
Make wqe_size large enough to account for the injected metadata.
Support only Linked-list RQ type.
IPSec offload RX packets may have useful CHECKSUM_COMPLETE information,
which the stack may not be able to use yet.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add Innova IPSec ESP crypto offload configuration paths.
Detect Innova IPSec device and set the NETIF_F_HW_ESP flag.
Configure Security Associations using the API introduced in a previous
patch.
Add Software-parser hardware descriptor layout
Software-Parser (swp) is a hardware feature in ConnectX which allows the
host software to specify protocol header offsets in the TX path, thus
overriding the hardware parser.
This is useful for protocols that the ASIC may not be able to parse on
its own.
Note that due to inline metadata, XDP is not supported in Innova IPSec.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add routines for manipulating the hardware IPSec SA database (SADB).
In Innova IPSec, a Security Association (SA) is added or deleted
via a command message over the SBU connection.
The HW then sends a response message over the same connection.
Add implementation for Innova IPSec (FPGA-based) hardware.
These routines will be used by the IPSec offload support in a later patch
However they may also be used by others such as RDMA and RoCE IPSec.
mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs
to work directly with mlx5_core rather than Innova FPGA or other mlx5
acceleration providers.
In this patchset we add Innova IPSec support and mlx5/accel delegates
IPSec offloads to Innova routines.
In the future, when IPSec/TLS or any other acceleration gets integrated
into ConnectX chip, mlx5/accel layer will provide the integrated
acceleration, rather than the Innova one.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add interface to initialize and interact with Innova FPGA SBU
connections.
A client driver may use these functions to set up a high-speed DMA
connection with its SBU hardware logic, and send/receive messages
over this connection.
A later patch in this patchset will make use of these functions for
Innova IPSec offload in mlx5 Ethernet driver.
Add commands to retrieve Innova FPGA SBU capabilities, and to
read/write Innova FPGA configuration space registers and memory,
over internal I2C.
At high level, the FPGA configuration space is divided such:
0x00000000 - 0x007fffff is reserved for the SBU
0x00800000 - 0xffffffff is reserved for the Shell
0x400000000 - ... is DDR memory
A later patchset will add support for accessing FPGA CrSpace and memory
over a high-speed connection. This is the reason for the ACCESS_TYPE
enumeration, which currently only supports I2C.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The Innova FPGA includes shell hardware and Sandbox-Unit (SBU) hardware.
The shell hardware is handled by mlx5_core itself, while the SBU is
handled by a client driver.
Reset the SBU to a well-known initial state when initializing a new
device, and set the FPGA to bypass mode when uninitializing a device.
This allows the client driver to assume that its device has been
reset when a new device is detected.
During SBU reset, the FPGA is put into SBU-bypass mode. In this mode
packets do not pass through the SBU, so it cannot affect the network
data stream at all.
A factory-image does not have an SBU, so skip these flows.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
An FPGA high-speed connection has two endpoints, an FPGA QP and a
ConnectX QP.
Add library routines to create and connect the endpoints of an
FPGA high-speed connection.
These routines allow creating and interacting with both types of
connections: Shell and Sandbox Unit (SBU).
Shell connection provides an interface to the FPGA's address space,
which includes the configuration space and the DDR.
Use of the shell connection will be introduced in a later patchset.
SBU connection provides a command and/or data interface to the
application-specific logic within the FPGA.
Use of the SBU connection will be introduced in a later patch in
this patchset.
Some struct definitions are added to a new header file sdk.h, which
will be extended in later patches in the patchset.
This header file will contain the in-kernel FPGA client driver API.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The FPGA QP is a high-bandwidth communication channel between the host
CPU and the FPGA device. It allows performing DMA operations between
host memory and the FPGA logic via the ConnectX chip.
Add ConnectX FW commands which create and manipulate FPGA QPs.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The FPGA init and cleanup routines should be called just once per
device.
Move them to the init_once and cleanup_once routines.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
A QP in ConnectX is a concatenation of RQ and SQ which share a QP-number
and work together.
Add support for allocating and managing the work-queue buffer for a QP, in
a similar way to how SQs and RQs are already supported.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move mlx5e_get_cqe routine to wq.h and rename it to
mlx5_cqwq_get_cqe.
This allows it to be used by other CQ users outside of the
ethernet driver code.
A later patch in this patchset will make use of it from
FPGA code for the FPGA high-speed connection.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reserved gids are taken by the mlx5_core, report smaller GID table
size to IB core.
Set mlx5_query_roce_port's return value back to int. In case of
error, return an indication. This rolls back some of the change
in commit 50f22fd8ec ("IB/mlx5: Set mlx5_query_roce_port's return value to void")
Change set_roce_addr to use gid_set function, instead of directly
sending the command.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Previously, only mlx5_ib enabled RoCE on the port, but FPGA needs it as
well.
Add support for counting number of enables, so that FPGA and IB can work
in parallel and independently.
Program the HW to enable RoCE on the first enable call, and program to
disable RoCE on the last disable call.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reserved GIDs are entries in the GID table in use by the mlx5_core
and its submodules (e.g. FPGA, SRIOV, E-Swtich, netdev).
The entries are reserved at the high indexes of the GID table.
A mlx5 submodule may reserve a certain amount of GIDs for its own use
during the load sequence by calling mlx5_core_reserve_gids, and must
also take care to un-reserve these GIDs when it closes.
Reservation is only allowed during the load sequence and before any
interfaces (e.g. mlx5_ib or mlx5_en) are up.
After reservation, a submodule may call mlx5_core_reserved_gid_alloc/
free to allocate entries from the reserved GIDs pool.
Reserve a GID table entry for every supported FPGA QP.
A later patch in the patchset will remove them from being reported to
IB core.
Another such patch will make use of these for FPGA QPs in Innova NIC.
Added lib/mlx5.h to serve as a library for mlx5 submodlues, and to
expose only public mlx5 API, more mlx5 library files will be added in
future submissions.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In load_one, the interface flags are changed from down to up,
only after initializing the interfaces.
In unload_one, the flags are changed from up to down before the
interface cleanup.
Change the cleanup order to be opposite to initialization order.
This fixes flag consistency between init and cleanup.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We have pretty clear evidence that MSIs are getting lost on g4x and
somehow the interrupt logic doesn't seem to recover from that state
even if we try hard to clear the IIR.
Disabling IER around the normal IIR clearing in the irq handler isn't
sufficient to avoid this, so the problem really seems to be further
up the interrupt chain. This should guarantee that there's always
an edge if any IIR bits are set after the interrupt handler is done,
which should normally guarantee that the CPU interrupt is generated.
That approach seems to work perfectly on VLV/CHV, but apparently
not on g4x.
MSI is documented to be broken on 965gm at least. The chipset spec
says MSI is defeatured because interrupts can be delayed or lost,
which fits well with what we're seeing on g4x. Previously we've
already disabled GMBUS interrupts on g4x because somehow GMBUS
manages to raise legacy interrupts even when MSI is enabled.
Since there's such widespread MSI breakahge all over in the pre-gen5
land let's just give up on MSI on these platforms.
Seqno reporting might be negatively affected by this since the legcy
interrupts aren't guaranteed to be ordered with the seqno writes,
whereas MSI interrupts may be? But an occasioanlly missed seqno
seems like a small price to pay for generally working interrupts.
Cc: stable@vger.kernel.org
Cc: Diego Viola <diego.viola@gmail.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101261
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626203051.28480-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that user-space (typically alsa-lib) can specify which protocol
version it supports, we can optimize the kernel code depending on the
reported protocol version.
In this patch, we change the previous hack for enforcing the appl_ptr
sync by disabling status/control mmap. Instead of forcibly disabling
both mmaps, we disable only the control mmap when user-space declares
the supported protocol version new enough. For older user-space,
still both PCM status and control mmaps are disabled when requested by
the driver due to the compatibility reason.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have an ioctl to inform the PCM protocol version the running kernel
supports, but there is no way to know which protocol version the
user-space can understand. This lack of information caused headaches
in the past when we tried to extend the ABI. For example, because we
couldn't guarantee the validity of the reserved bytes, we had to
introduce a new ioctl SNDRV_PCM_IOCTL_STATUS_EXT for assigning a few
new fields in the formerly reserved bits. If we could know that it's
a new alsa-lib, we could assume the availability of the new fields,
thus we could have reused the existing SNDRV_PCM_IOCTL_STATUS.
In order to improve the ABI extensibility, this patch adds a new ioctl
for user-space to inform its supporting protocol version to the
kernel. By reporting the supported protocol from user-space, the
kernel can judge which feature should be provided and which not.
With the addition of the new ioctl, the PCM protocol version is bumped
to 2.0.14, too. User-space checks the kernel protocol version via
SNDRV_PCM_INFO_PVERSION, then it sets the supported version back via
SNDRV_PCM_INFO_USER_PVERSION.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Symbol error during carrier counter from PPCNT was mistakenly reported as
TX carrier errors in get_stats ndo, although it's an RX counter.
Fixes: 269e6b3af3 ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Draining the health workqueue will ignore future health works including
the one that report hardware failure and thus we can't enter error state
Instead cancel the recovery flow and make sure only recovery flow won't
be scheduled.
Fixes: 5e44fca504 ('net/mlx5: Only cancel recovery work when cleaning up device')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When wait for firmware init fails, previous code would mistakenly
return success and cause inconsistency in the driver state.
Fixes: 6c780a0267 ("net/mlx5: Wait for FW readiness before initializing command interface")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pull clockevents updates from Daniel Lezcano:
- Made the tcb_clksrc endianess agnostic as the AVR32 support is gone
(Alexandre Belloni)
- Unmap io region on failure at init time in the fsl_ftm_timer (Arvind Yadav)
- Fix a bad return value for the mips-gic-timer at init time (Christophe
Jaillet)
- Fix invalid iomap check and switch the sun4i timer to use the common timer
init routine (Daniel Lezcano)
Previous patch (c5f228ef6c drm/mediatek: add *driver_data for different
hardware settings) calls devm_kfree() and then devm_kzalloc() to
reallocate color module data structure. But this reallocation cannnot
guarantee the new address is unchanged, but the caller will use the
old address, which is wrong.
Fix it by separate color module from general components, this patch
separate color module to independent files, like mtk_disp_ovl.c and
mtk_disp_rdma.c do
Fixes: c5f228ef6c ("drm/mediatek: add *driver_data for different hardware settings")
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Tested-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek>
If 'devm_kmalloc_array' returns NULL, we should return -ENOMEM as already
done a few lines above instead of deferencing a NULL pointer a few lines
below.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The current message contains a spelling mistake and is not easily
parsable. Re-phrase it to be more understandable.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Use platform_register_drivers instead of open coding the iteration over
component platform drivers in the mtk_drm_drv and mtk_hdmi modules.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
When host connects a crt screen, linux guest will detect two
screens: crt and dp. This is wrong as linux guest has only
one dp.
In order to avoid guest get host crt screen, we should set
ADPA_CRT_HOTPLUG_MONITOR to none. But MMIO_RO(PCH_ADPA) prevent
from that. So MMIO_DH should be used instead of MMIO_RO.
v2: Clear its staus to none at initialize, so guest don't
get host crt.(Zhangyu)
v3: SKL doesn't have this register, limit it to pre_skl.(xiong)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On BDW, when host physical screen and guest virtual screen aren't on
the same DDI port, guest i915 driver prints the following error and
stop running.
[ 6.775873] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000068
[ 6.775928] IP: intel_ddi_clock_get+0x81/0x430 [i915]
[ 6.776206] Call Trace:
[ 6.776233] ? vgpu_read32+0x4f/0x100 [i915]
[ 6.776264] intel_ddi_get_config+0x11c/0x230 [i915]
[ 6.776298] intel_modeset_setup_hw_state+0x313/0xd40 [i915]
[ 6.776334] intel_modeset_init+0xe49/0x18d0 [i915]
[ 6.776368] ? vgpu_write32+0x53/0x100 [i915]
[ 6.776731] ? intel_i2c_reset+0x42/0x50 [i915]
[ 6.777085] ? intel_setup_gmbus+0x32a/0x350 [i915]
[ 6.777427] i915_driver_load+0xabc/0x14d0 [i915]
[ 6.777768] i915_pci_probe+0x4f/0x70 [i915]
The null pointer is guest intel_crtc_state->shared_dpll which is
setted in haswell_get_ddi_pll(). When guest and host screen are
on different DDI port, host driver won't set PORT_CLK_SET(guest_port),
so haswell_get_ddi_pll() will return null and don't set
pipe_config->shared_dpll, once the following program refernce this
structure, it will print the above error.
This patch set the initial val of guest PORT_CLK_SEL(guest_port) to
LCPLL_810. And guest i915 driver will reset this value according to
guest screen mode.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
'clk' is a valid pointer at this point. So calling PTR_ERR on it is
pointess.
Return the error code from 'clk_prepare_enable()' if it fails instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
