The SEAD-3 board doesn't & never has configured the GIC frequency.
Remove the timer node from the DT in order to avoid attempting to probe
the GIC clocksource/clockevent driver which will produce error messages
such as these during boot:
[ 0.000000] GIC frequency not specified.
[ 0.000000] Failed to initialize '/interrupt-controller@1b1c0000/timer': -22
[ 0.000000] clocksource_probe: no matching clocksources found
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16188/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.
Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a61 ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.
Invert the branch condition to fix that particular issue.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce the I6500 PRID & probe it just the same way as I6400. The MIPS
I6500 is the latest in Imagination Technologies' I-Class range of CPUs,
with a focus on scalability & heterogeneity. It introduces the notion of
multiple clusters to the MIPS Coherent Processing System, allowing for a
far higher total number of cores & threads in a system when compared
with its predecessors. Clusters don't need to be identical, and may
contain differing numbers of cores & IOCUs, or cores with differing
properties.
This patch alone adds the basic support for booting Linux on an I6500
CPU without support for any of its new functionality, for which support
will be introduced in further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16190/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Recent CPUs from Imagination Technologies such as the I6400 or P6600 are
able to speculatively fetch data from memory into caches. This means
that if used in a system with non-coherent DMA they require that caches
be invalidated after a device performs DMA, and before the CPU reads the
DMA'd data, in order to ensure that stale values weren't speculatively
prefetched.
Such CPUs also introduced Memory Accessibility Attribute Registers
(MAARs) in order to control the regions in which they are allowed to
speculate. Thus we can use the presence of MAARs as a good indication
that the CPU requires the above cache maintenance. Use the presence of
MAARs to determine the result of cpu_needs_post_dma_flush() in the
default case, in order to handle these recent CPUs correctly.
Note that the return type of cpu_needs_post_dma_flush() is changed to
bool, such that it's clearer what's happening when cpu_has_maar is cast
to bool for the return value. If this patch were backported to a
pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int
we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is
currently 1ull<<30, so when truncated to an int gives a non-zero value
anyway, but even so the implicit conversion from long long int to bool
makes it clearer to understand what will happen than the implicit
conversion from long long int to int would. The bool return type also
fits this usage better semantically, so seems like an all-round win.
Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting
the return type change.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Ed Blake <ed.blake@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Instead of doing a linear search through the insn_table for each
instruction, use the opcode as direct index into the table. This will
give constant time lookup performance as the number of supported
opcodes increases. Make the tables const as they are only ever read.
For uasm-mips.c sort the table alphabetically, and remove duplicate
entries, uasm-micromips.c was already sorted and duplicate free.
There is a small savings in object size as struct insn loses a field:
$ size arch/mips/mm/uasm-mips.o arch/mips/mm/uasm-mips.o.save
text data bss dec hex filename
10040 0 0 10040 2738 arch/mips/mm/uasm-mips.o
9240 1120 0 10360 2878 arch/mips/mm/uasm-mips.o.save
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16365/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we hit an error whilst processing a reloc then we would return early
from apply_relocate & potentially not free entries in r_mips_hi16_list,
thereby leaking memory. Fix this by ensuring that we always run the code
to free r_mipps_hi16_list when errors occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 861667dc82 ("MIPS: Fix race condition in module relocation code.")
Fixes: 04211a5746 ("MIPS: Bail on unsupported module relocs")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
azx_codec_configure() loops over the codecs found on the given
controller via a linked list. The code used to work in the past, but
in the current version, this may lead to an endless loop when a codec
binding returns an error.
The culprit is that the snd_hda_codec_configure() unregisters the
device upon error, and this eventually deletes the given codec object
from the bus. Since the list is initialized via list_del_init(), the
next object points to the same device itself. This behavior change
was introduced at splitting the HD-audio code code, and forgotten to
adapt it here.
For fixing this bug, just use a *_safe() version of list iteration.
Fixes: d068ebc25e ("ALSA: hda - Move some codes up to hdac_bus struct")
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We were reading the no-implicit sync flag the wrong way around,
synchronizing too much for the explicit case, and not at all for the
implicit case. Oops.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The addition of the flags member to etnaviv_gem_submit structure didn't
take into account that the last member of this structure is a variable
length array.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Problem : While running IGT kms_atomic_transition test suite i encountered
a hang in drmHandleEvent immediately following an atomic_commit.
After dumping the atomic state I relized that in this case there was
not even one CRTC attached to the state and only disabled
planes. This probably due to a commit which hadn't changed any property
which would require attaching crtc state. This means drmHandleEvent
will never wake up from read since without CRTC in atomic state
the event fd will not be signaled.
Fix: Protect against this issue by failing atomic_commit early in
drm_mode_atomic_commit where such probelm can be identified.
v2:
Fix typos and extra newlines.
Change-Id: I3ee28ffae35fd1e8bfe553146c44da53da02e6f8
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497981426-27203-1-git-send-email-Andrey.Grodzovsky@amd.com
In prior commits the selected clock frequency does not propagate
correctly to what is written to the TRF7970A_MODULATOR_SYS_CLK_CTRL
register.
Signed-off-by: Geoff Lansberry <geoff@kuvee.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Just three minor fixups for stuff in -next.
* tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Clear execbuf's vma backpointer upon release
drm/i915: Pass the right flags to i915_vma_move_to_active()
drm/i915/cnl: Fix RMW on ddi vswing sequence.
- a fix from Eric for synchronization with etnaviv exported dma-bufs
- thermal throttle support for newer GPU cores
- updated module clock gating to work around GPU errata
- a fix to restore userspace buffer cache performance
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: restore ETNA_PREP_NOSYNC behaviour
drm/etnaviv: implement cooling support for new GPU cores
drm/etnaviv: update MLCG disables with info from newer Vivante driver
drm/etnaviv: update common.xml.h
drm/etnaviv: Expose our reservation object when exporting a dmabuf.
Just a few minor fixes. Important one is the execbuf async fix (aka
ANDROID_native_sync). There was another patch for a display coherency
corner case on APL, but we've random-walked in that space too much,
and the cherry-pick looked really invasive.
* tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
drm/i915: Retire the VMA's fence tracker before unbinding
Single vmwgfx fix
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
In the commit 3d774d5ef0 ("ALSA: seq: Allow the tristate build of
OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a
couple of places were forgotten, namely, opl3 and emux Makefile.
These contain the line like
snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
and this doesn't work any longer as expected because snd-opl3-synth
can be built-in while CONFIG_SND_SEQUENCER_OSS=m.
This patch fixes these places to build properly for the new kconfig
dependency. In the end, we had to use ifneq() to satisfy the
requirement. It's a bit ugly, but lesser evil.
Fixes: 3d774d5ef0 ("ALSA: seq: Allow the tristate build of OSS emulation")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a device is offline it can still be set to read-only via the bus id
through sysfs. Only the read-only feature flag for the ccw_device is
then set. If the device is online the corresponding block device needs
to be set to read-only as well (via set_disk_ro()).
The check whether there is a device to do so, however, happens after the
feature flag was set. This leads to an unnecessary "no such device"
error in the offline case.
This bug was introduced by commit 7571cb1c8e3cc ("s390/dasd: Make use of
dasd_set_feature() more often"). Fix this by simply returning count if
no device is available.
Fixes: 7571cb1c8e3cc ("s390/dasd: Make use of dasd_set_feature() more often")
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When uid checking is enabled firmware guarantees uniqueness of the uids
and we use them for device enumeration. Tests have shown that uid checking
can be toggled at runtime. This is unfortunate since it can lead to name
clashes.
Recognize these name clashes by allocating bits in zpci_domain even for
firmware provided ids.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In contrast to other hotplug events PEC 0x306 isn't about a single
but multiple devices. Also there's no information on what happened
to these devices. We correctly handled hotplug that way but failed
to handle hot-unplug. This patch addresses that and implements
hot-unplug of multiple devices via PEC 306.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
PCI hotplug events basically notify about the new state of a
function. Unfortunately some hypervisors implement hotplug
events in a way where it is not clear what the new state of
the function should be.
Use clp_get_state to find the current state of the function
and handle accordingly.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Code handling pci hotplug needs to determine the configuration
state of a pci function. Implement clp_get_state as a wrapper
for list pci functions.
Also change enum zpci_state to match the configuration state
values.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cleanup in zpci_fmb_enable_device when fmb registration fails. Also
don't free the fmb when deregistration fails in zpci_fmb_disable_device
but handle error situations when a function was hot-unplugged.
Also remove the mod_pci helper since it is no longer used.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
DMA tables are freed in zpci_dma_exit_device regardless of the return
code of zpci_unregister_ioat. This could lead to a use after free. On
the other hand during function hot-unplug, zpci_unregister_ioat will
always fail since the function is already gone.
So let zpci_unregister_ioat report success when the function is gone
but don't cleanup the dma table when a function could still have it
in access.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When we ask a function to stop creating interrupts this may fail
due to the function being already gone (e.g. after hot-unplug).
Consequently we don't free associated resources like summary bits
and bit vectors used for irq processing. This could lead to
situations where we ran out of these resources and fail to setup
new interrupts.
The fix is to just ignore the errors in cases where we can be
sure no new interrupts are generated.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After failures in arch_setup_msi_irqs common code calls
arch_teardown_msi_irqs. Thus, remove cleanup code from
arch_setup_msi_irqs.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".
Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.
Fixes: 3a65bcdc57 ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds some explaination on how the vmemmap based struct page layout's
physical mapping is allocated and tracked through linked list. It
also keeps note of a possible race condition.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add some explaination to the layout of vmemmap virtual address
space and how physical page mapping is only used for valid PFNs
present at any point on the system.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
nr_cpu_ids can be limited by nr_cpus boot parameter, whereas NR_CPUS is a
compile time constant, which shouldn't be compared against during cpu kick.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During secondary start, we do not need to BUG_ON if an invalid CPU number
is passed. We already print an error if secondary cannot be started, so
just return an error instead.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A memory barrier is not required after the task wakes up,
only if we clear the polling flag before waking. The case
where we have work to do is the important one, so optimise
for it.
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
