We have used cz timestamp register to gain a reference time wrt
to residency calculations. The residency counts are in cz clk ticks
(333Mhz clock) but for some reason the cz timestamp register gives
100us units. Perhaps for some other usage, the base-ten based values
are easier, but in residency calculations raw units would have been
the easiest.
As there is not much advantage of using base-ten clock through
a more costly punit access, take our reference times directly from
kernel clock.
v2: use ktime (Chris, Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Use intel_rc6_residency to get benefit for increased resolution
in byt/chv.
v2: output raw and time (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Vlv and chv residency counters are 40 bits in width.
With a control bit, we can choose between upper or lower
32 bit window into this counter.
Lets toggle this bit on and off on and read both parts.
As a result we can push the wrap from 13 seconds to 54
minutes.
v2: commit msg, loop readability, goto elimination (Chris)
v3: bug ref, divide outside runtime pm lock (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=94852
Reported-by: Len Brown <len.brown@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Change the granularity from milliseconds to microseconds
when returning rc6 residencies. This is in preparation
for increased resolution on some platforms.
v2: use 64bit div macro (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Plan is to make generic residency calculation utility
function for usage outside of sysfs. As a first step
move residency calculation into intel_pm.c
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
No one is using the structure imx_drm_component, so let's remove the
definition to save several lines.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Allow the planes to use the PRG/PRE units as linear prefetchers when
possible. This improves DRAM efficiency a bit and reduces the chance
for display underflow when the memory subsystem is under load.
This does not yet support scanning out tiled buffers directly, as this
needs more work, but it already wires up the basic interaction between
imx-drm, the IPUv3 driver and the PRG and PRE drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On i.MX6 QuadPlus the PRG needs to be clocked in order to pass
through the data access requests from the IDMAC. This call is a
no-op for other all other SoCs.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Using non-zero AXI IDs for anything other than the display channels
collides with the PRG AXI snooping, so only do this if there is no
PRG present.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The i.MX6 QuadPlus IPU needs to PRG unit to gain access to the
data bus. Make sure it is present and available to be used.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This adds support for the i.MX6 QUadPlus PRG unit. It glues together the
IPU and the PRE units.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
v4: add missing ipu_soc->prg_priv
On vblank instant-off systems, we can get into a situation where the cost
of enabling and disabling the vblank IRQ around a drmWaitVblank query
dominates. And with the advent of even deeper hardware sleep state,
touching registers becomes ever more expensive. However, we know that if
the user wants the current vblank counter, they are also very likely to
immediately queue a vblank wait and so we can keep the interrupt around
and only turn it off if we have no further vblank requests queued within
the interrupt interval.
After vblank event delivery, this patch adds a shadow of one vblank where
the interrupt is kept alive for the user to query and queue another vblank
event. Similarly, if the user is using blocking drmWaitVblanks, the
interrupt will be disabled on the IRQ following the wait completion.
However, if the user is simply querying the current vblank counter and
timestamp, the interrupt will be disabled after every IRQ and the user
will enabled it again on the first query following the IRQ.
v2: Mario Kleiner -
After testing this, one more thing that would make sense is to move
the disable block at the end of drm_handle_vblank() instead of at the
top.
Turns out that if high precision timestaming is disabled or doesn't
work for some reason (as can be simulated by echo 0 >
/sys/module/drm/parameters/timestamp_precision_usec), then with your
delayed disable code at its current place, the vblank counter won't
increment anymore at all for instant queries, ie. with your other
"instant query" patches. Clients which repeatedly query the counter
and wait for it to progress will simply hang, spinning in an endless
query loop. There's that comment in vblank_disable_and_save:
"* Skip this step if there isn't any high precision timestamp
* available. In that case we can't account for this and just
* hope for the best.
*/
With the disable happening after leading edge of vblank (== hw counter
increment already happened) but before the vblank counter/timestamp
handling in drm_handle_vblank, that step is needed to keep the counter
progressing, so skipping it is bad.
Now without high precision timestamping support, a kms driver must not
set dev->vblank_disable_immediate = true, as this would cause problems
for clients, so this shouldn't matter, but it would be good to still
make this robust against a future kms driver which might have
unreliable high precision timestamping, e.g., high precision
timestamping that intermittently doesn't work.
v3: Patch before coffee needs extra coffee.
Testcase: igt/kms_vblank
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>,
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
Currently ILK-BDW explicitly disable LP1+ watermarks from their
.init_clock_gating() hooks. Unfortunately that hook gets called way too
late since by that time we've already initialized all the watermark
state tracking which then gets out of sync with the hardware state.
We may eventually want to consider killing off the explicit LP1+
disable from .init_clock_gating(). In the meantime however, we can
avoid the problem by reordering the init sequence such that
intel_modeset_init_hw()->intel_init_clock_gating() gets called
prior to the hardware state takeover.
I suppose prior to the two stage watermark programming we were
magically saved by something that forced the watermarks to be
reprogrammed fully after .init_clock_gating() got called. But
now that no longer happens.
Note that the diff might look a bit odd as it kills off one
call of intel_update_cdclk(), but that's fine because
intel_modeset_init_hw() does the exact same thing. Previously
we just did it twice.
Actually even this new init sequence is pretty bogus as
.init_clock_gating() really should be called before any gem
hardware init since it can configure various clock gating
workarounds and whatnot that affect the GT side as well. Also
intel_modeset_init() really should get split up into better
defined init stages. Another "fun" detail is that
intel_modeset_gem_init() is where RPS/RC6 gets configured.
Why that is done from the display code is beyond me. I've
decided to leave all this be for now, and just try to fix
the init sequence enough for watermarks to work.
Cc: stable@vger.kernel.org
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: David Purton <dcpurton@marshwiggle.net>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96645
Fixes: ed4a6a7ca8 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220140443.30891-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315143158.31780-1-ville.syrjala@linux.intel.com
(cherry picked from commit 5be6e33400)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A few amd fixes.
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/amdgpu: Fix debugfs reg read/write address width
drm/amdgpu/si: add dpm quirk for Oland
drm/radeon/si: add dpm quirk for Oland
drm: amd: remove broken include path
drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
drm/amdgpu: fix parser init error path to avoid crash in parser fini
drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
Check that request has not been signaled before acquiring a reference to
the request for signaling later in the interrupt handler.
The loading of the cacheline (for request->fence.flags) should be "free"
when followed by the locked increment of the request->fence.refcount
(which then sets the cacheline to exclusive mode), i.e. the cost of
test_bit prior to an atomic_inc should be negligible. This should
benefit us when we have a pile of bare breadcrumbs (interrupted execbuf)
where we may get interrupts faster than we can get rid of the
intel_wait, or if the device is too slow to run the bottom-half between
interrupts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-5-chris@chris-wilson.co.uk
When adding a new request to the breadcrumb rbtree, we mark all those
requests inside the rbtree that are already completed as complete. This
wakes those waiters up and allows them to skip the spinlock before
returning to userspace. If one of those is the current bottom-half and
allocated its intel_wait on the stack, it may then overwrite the
b->irq_wait upon exiting i915_wait_request() just as the interrupt handler
dereferences it.
Fixes: 56299fb7d9 ("drm/i915: Signal first fence from irq handler if complete")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-2-chris@chris-wilson.co.uk
This adds support for the i.MX6 QuadPlus PRE units. Currently only
linear prefetch into SRAM is supported, other modes of operation
like the tiled-to-linear conversion will be added later.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPUv3 can read 8-bit alpha values from a separate plane buffer using
a companion IDMAC channel driven by the Alpha Transparency Controller
(ATC) for the graphics channels. The conditional read mechanism allows
to reduce memory bandwidth by skipping reads of color data for
completely transparent bursts.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Allow to calculate EBA for planes other than plane 0. This is in
preparation for the following patch, which adds support for separate
alpha planes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPUv3 can read 8-bit alpha values from a separate IDMAC channel driven
by the Alpha Transparency Controller (ATC) for the graphics IDMAC channels.
This allows to reduce memory bandwidth via a conditional read mechanism or
to support planar YUV formats with alpha transparency.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Some hardware can read the alpha components separately and then
conditionally fetch color components only for non-zero alpha values.
This patch adds fourcc definitions for two-plane RGB formats with an
8-bit alpha channel on a second plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The DP (display processor) channel disable code tried to busy wait for
the DP sync flow end interrupt status bit when disabling the partial
plane without a full modeset. That never worked reliably, and it was
disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC
channel disable" patch, causing ipu_wait_interrupt to always time out
after 50 ms, which in turn would trigger a timeout in
drm_atomic_helper_wait_for_vblanks.
This patch changes ipu_plane_atomic_disable to only queue a DP channel
register update at the next frame boundary and set a flag, which can be
done without any waiting whatsoever. The imx_drm_atomic_commit_tail then
calls a new ipu_plane_disable_deferred function that does the actual
IDMAC teardown of the planes that are flagged for deferred disabling,
after waiting for the vblank.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
drm_atomic_helper_cleanup_planes only calls the cleanup_fb plane
helpers, which we don't implement as a CMA framebuffer based driver.
There is no reason to wait for vblanks in commit_tail only to do nothing
afterwards.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
When disabling the foreground DP channel during a modeset, the DC is
already disabled without waiting for end of frame. There is no reason
to wait for a frame boundary before updating the DP registers in that
case.
Add support to apply updates immediately. No functional changes, yet.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
This has never worked properly, as the IRQ got retriggered immediately
on unmask. Remove the IRQ wait dance, as it is apparently safe to disable
the DC channel at any point in time.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPU does not natively understand bayer formats, but it can pass them
through unchanged. Add support for setting the image base address and
cropping offset to ipu_cpmem_set_image.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Otherwise, if the image base address is kept at zero, and if the user
ignores the error return value, the IPU may be configured to write into
the dma-apbh@00110000 region for large frames, which will lock up the
system.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Previously, the overlay plane position would only be updated when the
plane was first enabled or during a modeset. We can instruct the DP to
move the plane also when just updating the EBA.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use drm_plane_helper_check_state to clip raw user coordinates to crtc
bounds. This checks for full plane coverage and scaling already, so
we can drop some custom checks. Use the clipped coordinates everywhere.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Currently fw->path values can represent one of three possible states:
1) NULL - device without the uC
2) '\0' - device with the uC but have no firmware
3) else - device with the uC and we have firmware
Second case is used only to WARN at a later stage.
We can WARN right away and merge cases 1 and 2.
Code can be even further simplified and common (HuC/GuC logic) happening
right before the fetch can be offloaded to the common function.
v2: fewer temporary variables, more straightforward flow (M. Wajdeczko)
v3: DRM_ERROR instead of WARN (M. Wajdeczko)
v4: coding standard (J. Lahtinen)
v5: non-trivial rebase
v6: remove path check, we are checking fetch status (M. Wajdeczko)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Current version of intel_guc_init_hw() does a lot:
- cares about submission
- loads huc
- implement WA
This change offloads some of the logic to intel_uc_init_hw(), which now
cares about the above.
v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko)
v3: rename once again
v4: remove spurious comments and add some style (J. Lahtinen)
v5: flow changes, got rid of dead checks (M. Wajdeczko)
v6: rebase
v7: rebase & onion teardown (J. Lahtinen)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Let intel_guc_init_fw() focus on determining and fetching the correct
firmware.
This patch introduces intel_uc_sanitize_options() that is called from
intel_sanitize_options().
Then, if we have GuC, we can call intel_guc_init_fw() conditionally
and we do not have to do the internal checks.
v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko)
v3: fix comment again, change the nuke message (M. Wajdeczko)
v4: update title to reflect new function name + rebase
v5: text && remove 2 uneccessary checks (M. Wajdeczko)
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
