We cannot reference priv->fbdev outside of the #ifdef:
drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function]
static int virtnet_restore_up(struct virtio_device *vdev)
drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function]
static void virtnet_freeze_down(struct virtio_device *vdev)
As the #ifdef is a bit annoying here, this removes it entirely
and uses an IS_ENABLED() check in it place where needed.
Fixes: b4dd9f1ffaba ("drm/hisilicon: Remove custom FB helper deferred setup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: One step further, also remove the IS_ENABLED checks, core
no-ops out the fb helper functions that the cma helpers use. Discussed
with Arnd on dri-devel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725180555.3699056-1-arnd@arndb.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
FB helper code falls back to a 1024x768 mode if no outputs are connected
or don't report back any modes upon initialization. This can be annoying
because outputs that are added to FB helper later on can't be used with
FB helper if they don't support a matching mode.
The fallback is in place because VGA connectors can happen to report an
unknown connection status even when they are in fact connected.
Some drivers have custom solutions in place to defer FB helper setup
until at least one output is connected. But the logic behind these
solutions is always the same and there is nothing driver-specific about
it, so a better alterative is to fix the FB helper core and add support
for all drivers automatically.
This patch adds support for deferred FB helper setup. It checks all the
connectors for their connection status, and if all of them report to be
disconnected marks the FB helper as needing deferred setup. Whet setup
is deferred, the FB helper core will automatically retry setup after a
hotplug event, and it will keep trying until it succeeds.
v2: Rebase onto my entirely reworked fbdev helper locking. One big
difference is that this version again drops&reacquires the fbdev lock
(which is now fb_helper->lock, but before this patch series it was
mode_config->mutex), because register_framebuffer must be able to
recurse back into fbdev helper code for the initial screen setup.
v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon
return, I've fumbled that in the deferred setup case (Liviu).
v4: I was blind, redo this all. __drm_fb_helper_initial_config
shouldn't need to reacquire fb_helper->lock, that just confuses
callers. I myself got confused by kernel_fb_helper_lock and somehow
thought it's the same as fb_helper->lock. Tsk.
Also simplify the logic a bit (we don't need two functions to probe
connectors), we can stick much closer to the existing code. And update
some comments I've spotted that are outdated.
v5: Don't pass -EAGAIN to drivers, it's just an internal error code
(Liviu).
v6: Add _and_unlock suffix to clarify locking (Maarten)
Cc: Liviu Dudau <liviu@dudau.co.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.
Also squash in conflict fixup from Laurent Pinchart.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed
the entire panic handling code in our fbdev emulation. We might
restore kms panic output, but not through the bazillion of legacy
code layers called fbdev/fbcon, there's just no way to make that
work safely.
- With the module check change FBINFO_DEFAULT is always 0, so can be
removed too.
That removes another change to cargo-cult stuff in kms drivers, yay!
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VRAM is usually marked write combined, so change ioremap mode from
noncache to write combine for reading vbios from VRAM.
This will reduce cost time of reading vbios from 188ms to 8ms.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the error message "[drm:amdgpu_irq_disable_all
[amdgpu]] *ERROR* error disabling interrupt (-22)".
For virtual dce, it only use AMDGPU_CRTC_IRQ_VBLANK1 -
AMDGPU_CRTC_IRQ_VBLANK6, and don't use AMDGPU_CRTC_IRQ_VLINE1
- AMDGPU_CRTC_IRQ_VLINE6. And when rmmod amdgpu, it will disable
all interrupts, it will return error when the type of crtc irq
interrupt is AMDGPU_CRTC_IRQ_VLINE1 - AMDGPU_CRTC_IRQ_VLINE6.
BUG: SWDEV-121607
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The radeon driver reduces the framebuffer resolution to 8bpp if a
device with less than 32MB VRAM is found. This causes the framebuffer
to run in 8 bit paletted mode. For a text console this is not an
issue as 256 different colors is more than one gets on a VGA text
console. However this leads to a poor 8bit pseudo-color visual when
running X on fbdev, too, which is quite ugly.
In this patch, we try to give some moderate compromise: limit the
framebuffer bpp to 8 only when VRAM is 8MB or less, and use 16 bpp
otherwise for 32MB or less VRAM.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hardware can use huge pages to map 2MB of address space with only one PDE.
v2: few cleanups and rebased
v3: skip PT updates if we are using the PDE
v4: rebased, added support for CPU based updates
v5: fix CPU based updates once more
v6: fix ndw estimation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fragment bits work differently for Vega10 compared to previous generations.
Increase the fragment size to 2MB for now to better handle that.
v2: handle the hardware setup as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, get clock info from default clk of pm if dpm is disable.
Buf SRIOV doesn't support dpm and pm, can't get anything from pm.
Only get clock info only from default clk of amdgpu for SRIOV.
And driver get pm default clk also from amdgpu default clk and never
be changed by others. So use amdgpu default clk value for SRIOV
and non-dpm cases.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV won't do vbios post in guest OS, and the mmMC_VM_FB_LOCATION
is pf and vf copy, so still need to program fb location for SRIOV.
v2: No need to stop mc, and update gmc_v8_0_vram_gtt_location as well.
v3: New line after the stack variables
BUG: SWDEV-126629
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
