After the commit mentioned below, we start computing the byte and pixel
clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The
calculation involves the number of DSI lanes being used by the
downstream bridge/panel.
If the downstream bridge/panel tries to change the number of DSI lanes
(as done in the ADV7533 driver) in its mode_set() op, then our DSI
host driver will not have the correct number of lanes when computing
byte/pixel clocks.
Fix this by delaying the clock rate calculation in the DSI bridge
enable path. In particular, compute the clock rates in
msm_dsi_host_get_phy_clk_req().
This fixes the DSI host error interrupts seen when we try to switch
between modes that require different number of lanes (4 to 3 lanes, or
vice versa) on db410c. The error interrupts occur since the byte/pixel
clock rates aren't according to what the DSI video mode timing engine
expects.
Fixes: b62aa70a98 ("drm/msm/dsi: Move PHY operations out of host")
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We recently added locking to this function but there was a direct return
that was overlooked where we need to unlock.
Fixes: 0e08270a1f ("drm/msm: Separate locking of buffer resources from struct_mutex")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We recently added an integer overflow check but it needs an additional
tweak to work properly on 32 bit systems.
The problem is that we're doing the right hand side of the assignment as
type unsigned long so the max it will have an integer overflow instead
of being larger than SIZE_MAX. That means the "sz > SIZE_MAX" condition
is never true even on 32 bit systems. We need to first cast it to u64
and then do the math.
Fixes: 4a630fadbb ("drm/msm: Fix potential buffer overflow issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Following compilation warnings were observed for these files:
CC [M] drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.o
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c: In function 'blend_setup':
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: missing braces around initializer [-Wmissing-braces]
enum mdp5_pipe stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE };
^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: (near initialization for 'stage[0]') [-Wmissing-braces]
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: missing braces around initializer [-Wmissing-braces]
enum mdp5_pipe r_stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE };
^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: (near initialization for 'r_stage[0]') [-Wmissing-braces]
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c: In function 'mdp5_plane_mode_set':
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: missing braces around initializer [-Wmissing-braces]
struct phase_step step = { 0 };
^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: (near initialization for 'step.x') [-Wmissing-braces]
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: missing braces around initializer [-Wmissing-braces]
struct pixel_ext pe = { 0 };
^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: (near initialization for 'pe.left') [-Wmissing-braces]
This happens because in the first case we were initializing a two
dimensional array with {0} and in the second case we were initializing a
struct containing two arrays with {0}.
Fix them by adding another pair of {}.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Updated blob layout (Rob, Daniel, Kristian, xerpi)
v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)
v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)
v4:
Use plane->modifier_count instead of recounting (Daniel)
v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size
Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Vop Full framework now has following vops:
IP version chipname
3.1 rk3288
3.2 rk3368
3.4 rk3366
3.5 rk3399 big
3.6 rk3399 lit
3.7 rk3228
3.8 rk3328
The above IP version is from H/W define, some of vop support get
the IP version from VERSION_INFO register, some are not.
hardcode the IP version for each vop to identify them.
major version: used for IP structure, Vop full framework is 3,
vop little framework is 2.
minor version: on same structure, newer design vop will bigger
then old one.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049971-6131-1-git-send-email-mark.yao@rock-chips.com
In the H3 ES2.0 SoC the VSP2-DL instance has two connections to DU
channels that need to be configured independently. Extend the VSP-DU API
with a pipeline index to identify which pipeline the caller wants to
operate on.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The new RePaper driver uses the thermal subsystem, and fails to link
when it is built-in but thermal is a loadable module:
drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_probe':
repaper.c:(.text+0x540): undefined reference to `thermal_zone_get_zone_by_name'
drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_fb_dirty':
repaper.c:(.text+0xff4): undefined reference to `thermal_zone_get_temp'
This adds another Kconfig dependency to prevent the broken configuration,
forcing repaper to be a module too.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170727100004.300665-1-arnd@arndb.de
This has proven immensely useful for debugging memory leaks and
overallocation (which is a rather serious concern on the platform,
given that we typically run at about 256MB of CMA out of up to 1GB
total memory, with framebuffers that are about 8MB ecah).
The state of the art without this is to dump debug logs from every GL
application, guess as to kernel allocations based on bo_stats, and try
to merge that all together into a global picture of memory allocation
state. With this, you can add a couple of calls to the debug build of
the 3D driver and get a pretty detailed view of GPU memory usage from
/debug/dri/0/bo_stats (or when we debug print to dmesg on allocation
failure).
The Mesa side currently labels at the gallium resource level (so you
see that a 1920x20 pixmap has been created, presumably for the window
system panel), but we could extend that to be even more useful with
glObjectLabel() names being sent all the way down to the kernel.
(partial) example of sorted debugfs output with Mesa labeling all
resources:
kernel BO cache: 16392kb BOs (3)
tiling shadow 1920x1080: 8160kb BOs (1)
resource 1920x1080@32/0: 8160kb BOs (1)
scanout resource 1920x1080@32/0: 8100kb BOs (1)
kernel: 8100kb BOs (1)
v2: Use strndup_user(), use lockdep assertion instead of just a
comment, fix an array[-1] reference, extend comment about name
freeing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-2-eric@anholt.net
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
As done for vega10 in commit 3ddd396f6b ("drm/amd/powerplay: Use
designated initializers") mark other tableFunction entries with designated
initializers. The randstruct plugin requires designated initializers for
structures that are entirely function pointers.
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
