This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did
always streaming on both I2S and SPDIF, ignoring the DAI ID.
The bug was introduced by the commit 75b9b65ee5
"ASoC: kirkwood: add S/PDIF support"
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch removes the 32 bits format which is not supported by S/PDIF
output.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
snd_pcm_limit_hw_rates() will initialize the minimum and maximum sample rate for
the PCM stream based on the rates specified in the rates field. Since we call
snd_pcm_limit_hw_rates() after soc_pcm_init_runtime_hw() it will essentially
overwrite the min and max rate set in soc_pcm_init_runtime_hw(). This may cause
the minimum or maximum rate to be set to a value outside the range of one of the
components if one of the components sets either SNDRV_PCM_RATE_CONTINUOUS or
SNDRV_PCM_RATE_KNOT and the other component specified a discrete rate via
SNDRV_PCM_RATE_[0-9]* that is outside of the first component's rate range. To
fix this first calculate the minimum and maximum rates using
snd_pcm_limit_hw_rates() and then on top of that apply the contraints specified
in the snd_soc_pcm_stream structs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Takashi iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
In order to make sure that the sample rate is in the supported range of both
components the maximum rate of the card should be the minimum of the maximum
rate of each components. There is one special case to consider though, if
max_rate is set to 0 this means there is no maximum specified, so use
min_not_zero() macro which will give use the desired result.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Takashi iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
As the priv is not assigned to card->drvdata, it is NULL, so when
unload module, it will cause NULL pointer oops.
Assign priv to card->drvdata to fix this issue.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
When a headphone jack is configurable as input, the generic parser
tries to make it retaskable as Headphone Mic. The switching can be
done smoothly if Capture Source control exists (i.e. there is another
input source). Or when user explicitly enables the creation of jack
mode controls, "Headhpone Mic Jack Mode" will be created accordingly.
However, if the headphone mic is the only input source, we have to
create "Headphone Mic Jack Mode" control because there is no capture
source selection. Otherwise, the generic parser assumes that the
input is constantly enabled, thus the headphone is permanently set
as input. This situation happens on the old MacBook Airs where no
input is supported properly, for example.
This patch fixes the problem: now "Headphone Mic Jack Mode" is created
when such an input selection isn't possible.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To reduce driver resume time, this patch resumes the codecs in parallel
if there are multiple codecs on the bus.
- The PM workqueue of bus is also used to parallel resuming multiple codecs.
- The work item 'pm_work' is renamed to 'suspend_work' to parallel suspending
codecs.
- Add a work item 'resume_work' to parallel resuming codecs.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The time to suspend a single codec may be several hundreds of ms. When runtime
power saving is disabled, driver suspend time can be long especially when there
are more than one codec on the bus.
To reduce driver suspend time, this patch creates a work queue for the bus, and
suspends the codecs in parallel if there are multiple codecs on the bus.
[fixed cosmetic issues by tiwai]
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Wireless USB audio devices, use multiple isoc packets per URB for
inbound endpoints with a datainterval < 5. This allows the WUSB host
controller to take advantage of bursting to service endpoints whose
logical polling interval is less than the 4ms minimum polling interval
limit in WUSB.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most Thinkpad Edge series laptops use conexant codec, so far although
the codecs have different minor Vendor Id and minor Subsystem Id,
they all belong to the cxt5066 family, this change can make the
mute/mic-mute LEDs support more generic among cxt_5066 family.
This design refers to the similar solution for the realtek codec
ALC269 family in the patch_realtek.c.
Cc: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to Mengdong, we shouldn't enable runtime PM when a codec
doesn't support EPSS, based on the experiences on Windows.
We have already this check in HDMI codec drivers, but now apply it in
general in hda_codec.c.
Credit goes to Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we fixed the long-standing bugs of runtime PM, let's enable
Panther Point again. The runtime PM was disabled in the HDMI codec
driver due to the S3 issue, and this should have been fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functional change.
- codec->pm_down_notified flag is renamed to codec->pm_up_notified
flag (and takes the reversed meaning), which is managed solely in
hda_call_pm_notify() now.
- The explicit call of hda_call_pm_notify() is moved into
hda_keep_power_on().
- Removed a redundant call of hda_call_pm_notify() in
snd_hda_power_up(), as it's called in hda_call_codec_resume()
anyway.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a codec contains only the digital outputs, it's very likely a
HDMI/DP codec, which isn't supported by the generic parser but via
HDMI codec parser code. Detect such a case and bind with the proper
parser object if available.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop the hard dependency on the generic parser code and load / unload
the generic parser code dynamically if built as a module. This allows
us to avoid the generic parser if only HDMI/DP codecs are found.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use bus->power_keep_link_on instead. The controller shouldn't go to
D3 when the link isn't reset, so essentially avoiding the link reset
means avoiding the runtime PM.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver adds support for digital audio (I2S)
for the BCM2835 SoC that is used by the
Raspberry Pi. External audio codecs can be
connected to the Raspberry Pi via P5 header.
It relies on cyclic DMA engine support for BCM2835.
Signed-off-by: Florian Meier <florian.meier@koalo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Instead of using a fake register use a supply widget to manage the power
for the inputs, this is more idiomatic and supports regmap conversion.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Instead of using a fake register and events to manage input power use a
supply to do the job, saving code and preparing for regmap conversion of
the driver.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
