We originally thought to request SST audio DSP firmware during the SST
platform driver initialization. However plain request_firmware doesn't
work in driver probe paths if userspace is not ready to handle it. For
instance when drivers are built-in.
Implementing asynchronous firmware request in SST platform driver
initialization complicates code needlessly since it anyway will fail if
firmware is missing.
This is more simple to handle by requesting firmware asynchronously in
sst_acpi_probe() and register SST platform only after firmware is loaded.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
While moving the card device into struct snd_card, the reference to
the assigned card in sysfs show/store callbacks were forgotten to be
refreshed, still accessing to the no longer used drvdata. Fix these
places to refer correctly via container_of().
Also, remove the superfluous NULL checks since it's guaranteed to be
non-NULL now.
Fixes: 8bfb181c17 ('ALSA: Embed card device into struct snd_card')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Incorrect ADC is picked in ca0132_capture_pcm_prepare(),
where it assumes multiple streams while there is one stream
per ADC. Note that ca0132_capture_pcm_cleanup() already does
the right thing.
The Chromebook Pixel has a microphone under the keyboard that
is attached to node id 0x8. Before this fix, recording would
always go to the main internal mic (node id 0x7).
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a HDMI stream is opened with the same stream tag
as a following opened stream to ca0132, audio will be
heard from two ports simultaneously.
Fix this issue by change to use snd_hda_codec_setup_stream
and snd_hda_codec_cleanup_stream instead, so that an
inactive stream can be marked as 'dirty' when found
with a conflict stream tag, and then get purified.
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Chih-Chung Chang <chihchung@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move fw_base and fw_size fields in struct sst_pdata under ACPI data for
clarifying that these are not related to firmware file but for platform
specific extended firmware area reserved by the BIOS.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds support for the ADAU1977, ADAU1978 and ADAU1979 audio CODEC
devices. They are a family of 4-channel differential input audio ADC devices.
They can be connected to either a SPI or I2C bus. The driver is implemented in
three modules, one main module (adau1977.ko) which implements the device logic
and one module each for SPI (adau1977-spi.ko) and I2C (adau1977-i2c.ko) bus
access.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The error messages for bypassing/unbypassing a regulator appear to be
swapped round, this patch corrects these.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The Intel audio DSP SST trace event header has been renamed from sst.h
to intel-sst.h in order to avoid any confusion with any future
Samoa Standard Time drivers ;)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Provide services for Intel SST drivers to load SST modular firmware.
SST Firmware can be made up of several modules. These modules can exist
within any of the compatible SST memory blocks. Provide a generic memory
block and firmware module manager that can be used with any SST firmware
and core.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Most of the SST devices will be exposed as ACPI devices. It makes sense to
avoid duplication of the driver enumeration logic and concentrate the functionality
into a single ACPI SST enumeration file.
Idea of this loader is to parse data we get from ACPI and to be able to load
needed other SST drivers and ASoC machine driver runtime based on single
ACPI ID what BIOS gives to us.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for Intel Smart Sound Technology (SST) audio DSPs.
This driver provides the low level IO, reset, boot and IRQ management
for Intel audio DSPs. These files make up the low level part of the SST
audio driver stack and will be used by many Intel SST cores like
Haswell, Broadwell and Baytrail.
SST DSPs expose a memory mapped region (shim) for config and control.
The shim layout is mostly shared without much modification across cores
and this driver provides a uniform API to access the shim and to enable
basic shim functions. It also provides functionality to abstract some shim
functions for cores with different shim features.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
* We need to be extra careful to make sure to not build the driver into the
kernel if one of the subsystems is build as a module (Currently only I2C
can be build as a module).
* The module init path error handling is rather ugly. E.g. what should be
done if either the SPI or the I2C driver fails to register. Most drivers
that implement SPI and I2C in the same module currently fallback to
undefined behavior in that case. Splitting the the driver into two
modules, one for each bus, allows the registration of the other bus drive
to continue without problems if one of them fails.
This patch splits the ADAV80X driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use devm_kzalloc() to allocate the device state struct. Saves use from having to
free it manually on the error path and in the remove callback.
Now that the adav80x_bus_probe() function is only a call to
snd_soc_unregister_codec() also inline that.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
* We need to be extra careful to make sure to not build the driver into the
kernel if one of the subsystems is build as a module (Currently only I2C
can be build as a module).
* The module init path error handling is rather ugly. E.g. what should be
done if either the SPI or the I2C driver fails to register? Most drivers
that implement SPI and I2C in the same module currently fallback to
undefined behavior in that case. Splitting the the driver into two
modules, one for each bus allows the registration of the other bus driver
to continue without problems if one of them fails.
This patch splits the ssm2602 driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
While we are at it also cleanup the include section of the ssm2602 driver and
remove unneeded includes.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
* We need to be extra careful to make sure to not build the driver into the
kernel if one of the subsystems is build as a module (Currently only I2C
can be build as a module).
* The module init path error handling is rather ugly. E.g. what should be
done if either the SPI or the I2C driver fails to register? Most drivers
that implement SPI and I2C in the same module currently fallback to
undefined behavior in that case. Splitting the the driver into two
modules, one for each bus, allows the registration of the other bus driver
to continue without problems if one of them fails.
This patch splits the AD193X driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Avoid traversing the device object list of the card instance just for
checking the PCM streams. The driver's private object already
contains the array of substream pointers, so it can be simply looked
through. The card internal may be restructured in future, thus better
not to rely on it.
Also, this fixes the possible deadlocks in PCM mutex. Instead of
taking multiple PCM mutexes, just take the common mutex in all
places. Along with it, rename prepare_mutex as pcm_mutex.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the driver tries to access Function Unit 10, the KEF X300A
speakers' firmware apparently locks up, making even PCM streaming
impossible. Work around this by ignoring this FU.
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All ASoC CODEC drivers that use SPI have now been converted to use regmap
so we can delete SND_SOC_SPI, preventing any new users being added.
Signed-off-by: Mark Brown <broonie@linaro.org>
The REVISION_ID register is not currently marked readable. snd_soc_read()
refuses to read the register, and hence probe() fails.
Fixes: d4807ad2c4 ("regmap: Check readable regs in _regmap_read")
[exposed the bug, by checking for readability]
Fixes: 685e42154d ("ASoC: Replace max98090 Device Driver")
[left out this register from the readable list]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch fixes a crash caused by commit 3bed3344c8
(ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()).
This is an attempt to assign "drvdata->base" while memory
for "drvdata" is not already allocated.
Fixes: 3bed3344c8 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource())
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Realtek codec driver contains some codes referring to the PCI
subdevice IDs, but most of them are optional, typically for checking
the codec name variants. Add NULL checks appropriately so that it can
work without PCI assignment.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default parent device can be obtained directly via card object, so
we don't need to rely on pci->dev.parent. Since there is no access to
pci_dev, we can reduce the inclusion of linux/pci.h, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a simple ASoC board driver fo the Armada 370
Development Board, which connects the audio unit of the Armada 370 SoC
to the I2C-based CS42L51.
For now, only the analog audio input and output through the CS42L51
are supported, but a followup patch adds S/PDIF support to this
driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Function del_timer() does not guarantee that timer was really deleted.
If the timer handler is beeing executed at the moment, the function
does nothing. So, it's possible to use already freed memory in the handler:
[ref: Documentation/DocBook/kernel-locking.tmpl]
This was found using grep and compile-tested only.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using __bitwise and typedefs for the attributes of snd_device struct
isn't so useful, and rather it worsens the readability. Let's drop
them and use the straightforward enum.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of SNDRV_DEV_LOWLEVEL, use SNDRV_DEV_CODEC type for mixer
objects so that they are managed in a proper release order.
No functional change at this point.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
