Merge "Renesas ARM Based SoC Boards Cleanups for v3.19" from Simon Horman:
* Sort armadillo800eva includes
* tag 'renesas-boards-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: armadillo800eva: Sort includes
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM Based SoC Kconfig Cleanups for v3.19
* Remove reference to ARCH_HAS_OPP, it has been removed
* tag 'renesas-kconfig-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove ARCH_HAS_OPP completely
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO
descriptors") already converted most of the driver to use GPIO descriptors.
What is still missing is the platform specific hook gpio_blink_set() and
board files which pass legacy GPIO numbers to this driver in platform data.
In this patch we handle the former and convert gpio_blink_set() to take
GPIO descriptor instead. In order to do this we convert the existing four
users to accept GPIO descriptor and translate it to legacy GPIO number in
the platform code. This effectively "pushes" legacy GPIO number usage from
the driver to platforms.
Also add comment to the remaining block describing that it is legacy code
path and we are getting rid of it eventually.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Observing that per-CPU data (in the SMP case) is reachable by
exploiting 64-bit address wraparound (building on the default kernel
load address being at 16Mb), the one byte shorter RIP-relative
addressing form can be used for most per-CPU accesses. The one
exception are the "stable" reads, where the use of the "P" operand
modifier prevents the compiler from using RIP-relative addressing, but
is unavoidable due to the use of the "p" constraint (side note: with
gcc 4.9.x the intended effect of this isn't being achieved anymore,
see gcc bug 63637).
With the dependency on the minimum kernel load address, arbitrarily
low values for CONFIG_PHYSICAL_START are now no longer possible. A
link time assertion is being added, directing to the need to increase
that value when it triggers.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5458A1780200007800044A9D@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes if you please"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: use device_online/offline() instead of cpu_up/down()
powerpc/powernv: Properly fix LPC debugfs endianness
powerpc: do_notify_resume can be called with bad thread_info flags argument
powerpc/fadump: Fix endianess issues in firmware assisted dump handling
powerpc: Fix section mismatch warning
Both this_cpu_off and cpu_info aren't getting modified post boot, yet
are being accessed on enough code paths that grouping them with other
frequently read items seems desirable. For cpu_info this at the same
time implies removing the cache line alignment (which afaict became
pointless when it got converted to per-CPU data years ago).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/54589BD20200007800044A84@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that Keystone PCI controller is merged, add pcie related options
by default for keystone architecture so that driver can be enabled in
the build.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
K2E SoC has a second PCI port based on Synopsis Designware PCIe h/w.
Add DT bindings to support PCI controller for port 1 for this SoC.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add common DT bindings to support PCI controller driver for port 0 on all
of the K2 SoCs that has Synopsis Designware based pcie h/w.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
On large-memory x86-64 systems of 64GB or more with memory hot-plug
enabled, use a 2GB memory block size. Eg with 64GB memory, this reduces
the number of directories in /sys/devices/system/memory from 512 to 32,
making it more manageable, and reducing the creation time accordingly.
This caveat is that the memory can't be offlined (for hotplug or
otherwise) with the finer default 128MB granularity, but this is
unimportant due to the high memory densities generally used with such
large-memory systems, where eg a single DIMM is the order of 16GB.
Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Cc: Steffen Persvold <sp@numascale.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1415089784-28779-4-git-send-email-daniel@numascale.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
setup/restore_sigcontext() want to copy all related registers between
user and kernel. So use block copy instead of each registers copy. Then
can let code simple and clearer (which can avoid compiler's warning):
The related warning (with allmodconfig under tile):
CC arch/tile/kernel/signal.o
In file included from include/linux/poll.h:11:0,
from include/linux/ring_buffer.h:7,
from include/linux/ftrace_event.h:5,
from include/trace/syscall.h:6,
from include/linux/syscalls.h:81,
from arch/tile/kernel/signal.c:30:
arch/tile/kernel/signal.c: In function 'setup_sigcontext':
arch/tile/kernel/signal.c:116:31: warning: iteration 53u invokes undefined behavior [-Waggressive-loop-optimizations]
err |= __put_user(regs->regs[i], &sc->gregs[i]);
^
./arch/tile/include/asm/uaccess.h:236:26: note: in definition of macro '__put_user_asm'
: "r" (ptr), "r" (x), "i" (-EFAULT))
^
./arch/tile/include/asm/uaccess.h:297:10: note: in expansion of macro '__put_user_8'
case 8: __put_user_8(x, ptr, __ret); break; \
^
arch/tile/kernel/signal.c:116:10: note: in expansion of macro '__put_user'
err |= __put_user(regs->regs[i], &sc->gregs[i]);
^
arch/tile/kernel/signal.c:115:2: note: containing loop
for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
The current GPL only licensing on the DTSI makes it very impractical for other
software components licensed under another license.
In order to make it easier for them to reuse our device trees, relicense our
device trees under a GPL/X11 dual-license.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: FUKAUMI Naoki <naobsd@gmail.com>
We were returning maxlen like the userland strnlen if no '\0' character
was encountered while the kernel version is expected to return a value
larger than maxlen. Fixed to return maxlen + 1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since 64546e9fe3 ("ARM: imx_v6_v7_defconfig updates") and commit
0650f855d2 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI
selection was dropped by savedefconfig for imx_v4_v5_defconfig and
imx_v6_v7_defconfig.
In order to keep the same behaviour as previous kernel versions and avoid
regressions, let's add CONFIG_SPI option back.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Merge "Integrator multiplatform migration for v3.19" from Linus Walleij:
Multiplatform migration of the Integrator.
* tag 'integrator-multiplatform-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: set V4T and V5 as default multitargets
ARM: integrator: make the Integrator multiplatform
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "RealView DeviceTree support for v3.19" from Linus Walleij:
- Device Tree implementation for the ARM RealView boards
- DTS file for the ARM RealView PB1176
- Updates on top of the same DTS file
* tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: realview: add MMCI to the PB1176 DTS
ARM: realview: add KMIs to the PB1176 DTS
ARM: realview: add FPGA UART4 to PB1176 DTS
ARM: realview: add PL022 SSP/SPI block to PB1176 DTS
ARM: realview: add RTC clocks to device tree
ARM: realview: add charlcd to PB1176 device tree
ARM: realview: add PL061 GPIO to the PB1176 DTS
ARM: realview: move DT GIC to FPGA node
ARM: realview: add device tree and bindings for PB1176
ARM: realview: basic device tree implementation
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes" from Florian
Fainelli:
This pull request contains 3 changes for the brcmstb platform and 2 changes
to the GISB bus arbiter driver
- fist patch adds earlyprintk to brcmstb platforms using the existing 8250
infrastructure
- second patch re-introduces SMP support after fixing the problems we had in
the initial implementation, for this patch to apply cleanly, I had to advance
up to "ARM: brcmstb: revert SMP support"
- third patch is dropping unused Kconfig dependencies
- fourth patch registers the ARM fault code for external aborts that the GISB
bus arbiter driver is designed to assit
- fifth patch does save/restore the GISB arbiter timeout across S3
suspend/resume cycles
Thanks!
* tag 'brcmstb-smp-uart-for-3.19' of http://github.com/brcm/linux:
bus: brcmstb_gisb: save and restore GISB timeout
bus: brcmstb_gisb: register the fault code hook
ARM: brcmstb: Kconfig: drop unneeded symbol selections
ARM: brcmstb: reintroduce SMP support
ARM: brcmstb: add debug UART for earlyprintk support
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "1st Round of Samsung cleanup for v3.19" from Kukjin Kim:
Samsung cleanup for v3.19
- Cleanup SMP/hotplug codes from hotplug.c to platsmp.c
- Remove unneeded __ref annotation for exynos_cpu_die()
- Fix the way to power down CPU on exynos4 and CPUidle
clock down after power down some CPU
* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Fix CPU idle clock down after CPU off
ARM: EXYNOS: Remove unneeded __ref annotation for cpu_die function
ARM: EXYNOS: Move code from hotplug.c to platsmp.c
Signed-off-by: Olof Johansson <olof@lixom.net>
So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized
by boot loader and the kernel code defined fixed rates according
to those default configurations. Beginning with the USB PLL7 the
code started to initialize the PLL's itself (using imx_clk_pllv3).
However, since commit dc4805c2e7
(ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver)
imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits,
hence the USB PLL were not configured correctly anymore.
This patch not only fixes those USB PLL's, but also makes use of
the imx_clk_pllv3 for all PLL's and alignes the code with the PLL
support of the i.MX6 series.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Merge "ARM: rockchip: cpufreq-cpu0 device" from Heiko Stubner:
Add cpufreq-dt platform device for cpu frequency scaling.
* tag 'v3.18-rockchip-cpufreqdev-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: honor renaming of cpufreq-cpu0 to cpufreq-dt
ARM: rockchip: add a cpufreq-cpu0 device
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull "dts, kbuild: Implement support for dtb vendor subdirs" from
Robert Richter:
dts, kbuild: Implement support for dtb vendor subdirs
For arm64 we want to put dts files into vendor's subdirectories from
the beginning. This patch set implements this. As this is a generic
kbuild implementation, vendor subdirs will be also available for
arch/arm and other architectures. The subdirectory tree is also
reflected in the install path.
A new makefile variable dts-dirs is introduced to point to dts
subdirs. This variable is used by kbuild for building and installation
of dtb files.
A dts Makefile looks now as follows:
----
dtb-$(CONFIG_...) += some_file_1.dtb
dtb-$(CONFIG_...) += some_file_2.dtb
dts-dirs += dir_vendor_a
dts-dirs += dir_vendor_b
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
----
This patches also introduces the dtbs_install make target for
arm64. Install rules are moved to Makefile.dtbinst using the same
style and calling convention like for modinst and fwinst.
* tag 'dts-subdirs-for-arm-soc-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/linux:
dts, arm: Remove $(MACHINE) variable from dtbs make recipes
dts, arm64: Move dts files to vendor subdirs
dts, kbuild: Implement support for dtb vendor subdirs
dts, arm/arm64: Remove dtbs build rules in sub-makes
dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst
dts, arm64: Add dtbs_install make target
Signed-off-by: Olof Johansson <olof@lixom.net>
This board seems to be in use only for few automated
boot test system and has been booting in device tree
only mode for quite some time now.
So let's drop the board file for it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The 81xx support is known to be broken for quite some
time now because of missing patches. And it should be
using device tree based booting now anyways.
So let's just drop the board file for it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This code was only used by 2430sdp, 3430sdp, and n900 development
boards.
The 2430sdp is already device tree only, and all the users of the
3430sdp and n900 development boards are already booting in device
tree mode, so we can drop the legacy smc91x support.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Now that we have timings in the .dts files for smc91x
and 8250, we can remove the device specific checks and
just print out the bootloader timings for devices that
may not have timings in the .dts files.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As we still have some devices with GPMC timings missing from the
.dts files, let's make it a bit easier to use the bootloader
values and print them out.
Note that we now need to move the parsing of the device tree provided
configuration a bit earlier so we can use that for checking if anything
was configured.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There are cases where we have multiple device instances
connected to a single GPMC chip select. For example, there
are four UARTs on the Zoom debug boards that all share a
single chip select and a GPIO interrupt.
We do have support for this already in theory, but it's broken
because we're bailing out if the chip select is already taken.
To be able to provide checks on the chip select usage, let's
add new struct gpmc_cs_data so we can start using already
registered device names for checks.
Later on we probably want to start using struct gpmc_cs_data
as a wrapper for all the GPMC chipselect related data.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like we have some GPMC NAND timings missing device
width. This fixes "gpmc_cs_program_settings: invalid width 0!"
errors during boot.
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the GPMC warnings now enabled, I noticed the LAN9220 timings
can overflow the GPMC registers with 200MHz L3 speed. Earlier we
were just skipping the bad timings and would continue with the
bootloader timings. Now we no longer allow to continue with bad
timings as we have the timings in the .dts files.
We could start using the GPMC clock divider, but let's instead
use the u-boot timings that are known to be working and a bit
faster. These are basically the u-boot NET_GPMC_CONFIG[1-6]
defines deciphered. Except that we don't set gpmc,burst-length
as that's only partially configured and does not seem to work
if fully enabled.
[tony@atomide.com: updated to remove gpmc,burst-length]
Signed-off-by: Tony Lindgren <tony@atomide.com>
APMU resources are not common to all R-Car SoCs so don't share this data.
A subsequent patch will correct the CPU cores for the r8a7791.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull m68k update from Geert Uytterhoeven.
Just wiring up the bpf system call.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up bpf
