Pull "Renesas ARM Based SoC Boards Updates for v3.19" from Simon Horman:
* Add restart callback to kzm9g
* tag 'renesas-boards-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g-reference: Add restart callback
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Third Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:
* Use keyboard as gpio-keys node name
* tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name
ARM: shmobile: koelsch: Use keyboard as gpio-keys node name
ARM: shmobile: lager: Use keyboard as gpio-keys node name
ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add parent_hwmod pointer to omap_hwmod. This can be set to point to a
"parent" hwmod that needs to be enabled for the "child" hwmod to work.
This is used at hwmod setup time: when doing the initial setup and
reset, first enable the parent hwmod, and after setup and reset is done,
restore the parent hwmod to postsetup_state.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
[paul@pwsan.com: add kerneldoc documentation for parent_hwmod; note that it
is a temporary workaround]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Pull "Renesas ARM Based SoC DT DU Updates for v3.19" from Simon Horman:
* Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791
* tag 'renesas-dt-du-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: koelsch: Enable DU device in DT
ARM: shmobile: koelsch-reference: Remove DU platform device
ARM: shmobile: lager: Enable DU device in DT
ARM: shmobile: lager-reference: Remove DU platform device
ARM: shmobile: marzen: Enable DU device in DT
ARM: shmobile: dts: Add common file for AA104XD12 panel
ARM: shmobile: r8a7791: Add DU node to device tree
ARM: shmobile: r8a7790: Add DU node to device tree
ARM: shmobile: r8a7779: Add DU node to device tree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Second Round of Renesas ARM Based SoC Boards Cleanups for v3.19" form Simon Horman:
* marzen-reference: Don't include legacy clock.h
* tag 'renesas-boards-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: marzen-reference: Don't include legacy clock.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kernel-side struct msghdr is (currently) using the same layout as
userland one, but it's not a one-to-one copy - even without considering
32bit compat issues, we have msg_iov, msg_name and msg_control copied
to kernel[1]. It's fairly localized, so we get away with a few functions
where that knowledge is needed (and we could shrink that set even
more). Pretty much everything deals with the kernel-side variant and
the few places that want userland one just use a bunch of force-casts
to paper over the differences.
The thing is, kernel-side definition of struct msghdr is *not* exposed
in include/uapi - libc doesn't see it, etc. So we can add struct user_msghdr,
with proper annotations and let the few places that ever deal with those
beasts use it for userland pointers. Saner typechecking aside, that will
allow to change the layout of kernel-side msghdr - e.g. replace
msg_iov/msg_iovlen there with struct iov_iter, getting rid of the need
to modify the iovec as we copy data to/from it, etc.
We could introduce kernel_msghdr instead, but that would create much more
noise - the absolute majority of the instances would need to have the
type switched to kernel_msghdr and definition of struct msghdr in
include/linux/socket.h is not going to be seen by userland anyway.
This commit just introduces user_msghdr and switches the few places that
are dealing with userland-side msghdr to it.
[1] actually, it's even trickier than that - we copy msg_control for
sendmsg, but keep the userland address on recvmsg.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull "Third Round of Renesas ARM Based Soc Updates for v3.19" from Simon Horman:
* Always build rcar setup for armv7
- Fixes allmodconfig build fauilre caused by
"ARM: shmobile: always build rcar setup for armv7"
* Add restart callback to sh73a0
* tag 'renesas-soc3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: always build rcar setup for armv7
ARM: shmobile: sh73a0: Add restart callback
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Second Round of Renesas ARM Based SoC Soc Updates for v3.19" from Simon Horman:
* Enable PCI domains for R-Car Gen2 devices
* Make APMU resource code SoC-specific
* tag 'renesas-soc2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable PCI domains for R-Car Gen2 devices
ARM: shmobile: r8a7791: Correct number of CPU cores
ARM: shmobile: Separate APMU resource data into CPU dependant part
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Renesas ARM Based SoC Soc Updates for v3.19" from Simon Horman:
* Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled
* Add CA7 arch_timer initialization for r8a7794
* Handle CA7 arch timer delay
* Add shmobile_init_late() to sh7372
- This is consistent with other shmobile SoCs
* tag 'renesas-soc-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled
ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794
ARM: shmobile: sh7372: Add shmobile_init_late()
ARM: shmobile: Handle CA7 arch timer delay
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stack traces that happen from function tracing check if the address
on the stack is a __kernel_text_address(). That is, is the address
kernel code. This calls core_kernel_text() which returns true
if the address is part of the builtin kernel code. It also calls
is_module_text_address() which returns true if the address belongs
to module code.
But what is missing is ftrace dynamically allocated trampolines.
These trampolines are allocated for individual ftrace_ops that
call the ftrace_ops callback functions directly. But if they do a
stack trace, the code checking the stack wont detect them as they
are neither core kernel code nor module address space.
Adding another field to ftrace_ops that also stores the size of
the trampoline assigned to it we can create a new function called
is_ftrace_trampoline() that returns true if the address is a
dynamically allocate ftrace trampoline. Note, it ignores trampolines
that are not dynamically allocated as they will return true with
the core_kernel_text() function.
Link: http://lkml.kernel.org/r/20141119034829.497125839@goodmis.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When CONFIG_FRAME_POINTERS are enabled, it is required that the
ftrace_caller and ftrace_regs_caller trampolines set up frame pointers
otherwise a stack trace from a function call wont print the functions
that called the trampoline. This is due to a check in
__save_stack_address():
#ifdef CONFIG_FRAME_POINTER
if (!reliable)
return;
#endif
The "reliable" variable is only set if the function address is equal to
contents of the address before the address the frame pointer register
points to. If the frame pointer is not set up for the ftrace caller
then this will fail the reliable test. It will miss the function that
called the trampoline. Worse yet, if fentry is used (gcc 4.6 and
beyond), it will also miss the parent, as the fentry is called before
the stack frame is set up. That means the bp frame pointer points
to the stack of just before the parent function was called.
Link: http://lkml.kernel.org/r/20141119034829.355440340@goodmis.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org # 3.7+
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Uncorrected no action required (UCNA) - is a uncorrected recoverable
machine check error that is not signaled via a machine check exception
and, instead, is reported to system software as a corrected machine
check error. UCNA errors indicate that some data in the system is
corrupted, but the data has not been consumed and the processor state
is valid and you may continue execution on this processor. UCNA errors
require no action from system software to continue execution. Note that
UCNA errors are supported by the processor only when IA32_MCG_CAP[24]
(MCG_SER_P) is set.
-- Intel SDM Volume 3B
Deferred errors are errors that cannot be corrected by hardware, but
do not cause an immediate interruption in program flow, loss of data
integrity, or corruption of processor state. These errors indicate
that data has been corrupted but not consumed. Hardware writes information
to the status and address registers in the corresponding bank that
identifies the source of the error if deferred errors are enabled for
logging. Deferred errors are not reported via machine check exceptions;
they can be seen by polling the MCi_STATUS registers.
-- AMD64 APM Volume 2
Above two items, both UCNA and Deferred errors belong to detected
errors, but they can't be corrected by hardware, and this is very
similar to Software Recoverable Action Optional (SRAO) errors.
Therefore, we can take some actions that have been used for handling
SRAO errors to handle UCNA and Deferred errors.
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Until now, the mce_severity mechanism can only identify the severity
of UCNA error as MCE_KEEP_SEVERITY. Meanwhile, it is not able to filter
out DEFERRED error for AMD platform.
This patch extends the mce_severity mechanism for handling
UCNA/DEFERRED error. In order to do this, the patch introduces a new
severity level - MCE_UCNA/DEFERRED_SEVERITY.
In addition, mce_severity is specific to machine check exception,
and it will check MCIP/EIPV/RIPV bits. In order to use mce_severity
mechanism in non-exception context, the patch also introduces a new
argument (is_excp) for mce_severity. `is_excp' is used to explicitly
specify the calling context of mce_severity.
Reviewed-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Remove FIXME comments about needing fault addresses to be returned. These
are propaagated from walk_addr_generic to gva_to_gpa and from there to
ops->read_std and ops->write_std.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check on the higher limit of the segment, and the check on the
maximum accessible size, is the same for both expand-up and
expand-down segments. Only the computation of "lim" varies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes a long standing issue introduced during the 3.16 merge window.
Shortly after the merge, exynos5250-based arndale boards began to produce the
following errors:
kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage
kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22
Further analysis revealed that the S5M8767 voltage regulator used on the
exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the
S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator
fails to probe. Therefore a dependency exists between these two drivers.
In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410
options are enabled, and no errors are produced. However, in the
multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the
errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the
multi_v7_defconfig to allow the S5M8767 voltage regulator to probe.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
register_address has been a duplicate of address_mask ever since the
ancestor of __linearize was born in 90de84f50b (KVM: x86 emulator:
preserve an operand's segment identity, 2010-11-17).
However, we can put it to a better use by including the call to reg_read
in register_address. Similarly, the call to reg_rmw can be moved to
register_address_increment.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the microMIPS encoding of the J instruction for the purpose of
the static keys feature, fixing a crash early on in bootstrap as the
kernel is unhappy seeing the ISA bit set in jump table entries. Make
sure the ISA bit correctly reflects the instruction encoding chosen for
the kernel, 0 for the standard MIPS and 1 for the microMIPS encoding.
Also make sure the instruction to patch is a 32-bit NOP in the microMIPS
mode as by default the 16-bit short encoding is assumed
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8516/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Correct the check for the span of the 256MB segment addressable by the J
instruction according to this instruction's semantics. The calculation
of the jump target is applied to the address of the delay-slot
instruction that immediately follows. Adjust the check accordingly by
adding 4 to `e->code' that holds the address of the J instruction
itself.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit cf62a8b813 ("MIPS: lib: memcpy: Use macro to build the
copy_user code") switched to a macro in order to build the memcpy
symbols in preparation for the EVA support. However, this commit
also removed the NOP instruction after the 'jr ra' when returning
back to the caller. This had no visible side-effects since the next
instruction was a load to the t0 register which was already in the
clobbered list, but it may have undesired effects in the future
if some other code is introduced in between the .Ldone and
the .Ll_exc_copy labels.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8512/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
HTW needs to stop and start again whenever the EntryHI register
changes otherwise an inflight HTW operation might use the new
EntryHI register for updating an old entry and that could lead
to crashes or even a machine check exception. We fix this by
ensuring the HTW has stop whenever the EntryHI register is about
to change
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.17+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8511/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When EVA is turned on and prefetching is being used in memcpy.S,
the v1 register is being used as a helper register to the PREFE
instruction. However, v1 ($3) was not in the clobber list, which
means that the compiler did not preserve it across function calls,
and that could corrupt the value of the register leading to all
sorts of userland crashes. We fix this problem by using the
DADDI_SCRATCH macro to define the clobbered register when
CONFIG_EVA && CONFIG_CPU_HAS_PREFETCH are enabled.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8510/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
export the __node_distances symbol in the ip27 memory code to fix the
build error:
Building modules, stage 2.
MODPOST 311 modules
ERROR: "__node_distances" [drivers/block/nvme.ko] undefined!
scripts/Makefile.modpost:90: recipe for target '__modpost' failed
when building the kernel with:
CONFIG_SGI_IP27=y
CONFIG_BLK_DEV_NVME=m
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In __linearize there is check of the condition whether to check if masking of
the linear address is needed. It occurs immediately after switch that
evaluates the same condition. Merge them.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SS is used using a non-canonical address, an #SS exception is generated on
real hardware. KVM emulator causes a #GP instead. Fix it to behave as real x86
CPU.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If branch (e.g., jmp, ret) causes limit violations, since the target IP >
limit, the #GP exception occurs before the branch. In other words, the RIP
pushed on the stack should be that of the branch and not that of the target.
To do so, we can call __linearize, with new EIP, which also saves us the code
which performs the canonical address checks. On the case of assigning an EIP >=
2^32 (when switching cs.l), we also safe, as __linearize will check the new EIP
does not exceed the limit and would trigger #GP(0) otherwise.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When segment is accessed, real hardware does not perform any privilege level
checks. In contrast, KVM emulator does. This causes some discrepencies from
real hardware. For instance, reading from readable code segment may fail due to
incorrect segment checks. In addition, it introduces unnecassary overhead.
To reference Intel SDM 5.5 ("Privilege Levels"): "Privilege levels are checked
when the segment selector of a segment descriptor is loaded into a segment
register." The SDM never mentions privilege level checks during memory access,
except for loading far pointers in section 5.10 ("Pointer Validation"). Those
are actually segment selector loads and are emulated in the similarily (i.e.,
regardless to __linearize checks).
This behavior was also checked using sysexit. A data-segment whose DPL=0 was
loaded, and after sysexit (CPL=3) it is still accessible.
Therefore, all the privilege level checks in __linearize are removed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When performing segmented-read/write in the emulator for stack operations, it
ignores the stack size, and uses the ad_bytes as indication for the pointer
size. As a result, a wrong address may be accessed.
To fix this behavior, we can remove the masking of address in __linearize and
perform it beforehand. It is already done for the operands (so currently it is
inefficiently done twice). It is missing in two cases:
1. When using rip_relative
2. On fetch_bit_operand that changes the address.
This patch masks the address on these two occassions, and removes the masking
from __linearize.
Note that it does not mask EIP during fetch. In protected/legacy mode code
fetch when RIP >= 2^32 should result in #GP and not wrap-around. Since we make
limit checks within __linearize, this is the expected behavior.
Partial revert of commit 518547b32a (KVM: x86: Emulator does not
calculate address correctly, 2014-09-30).
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 10e38fc7cab6 ("KVM: x86: Emulator flag for instruction that only support
16-bit addresses in real mode") introduced NoBigReal for instructions such as
MONITOR. Apparetnly, the Intel SDM description that led to this patch is
misleading. Since no instruction is using NoBigReal, it is safe to remove it,
we fully understand what the SDM means.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull "ARM: tegra: Device tree fixes for v3.18-rc5" from Thierry Reding:
This contains the serial port numbering fixes that are required for the
serial port numbering to stay the same with or without the serial core
making use of the aliases defined in DT.
eMMC is also fixed for TN7 and Roth boards which were using the wrong
regulators.
* tag 'tegra-for-3.18-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: roth: Fix SD card VDD_IO regulator
ARM: tegra: Remove eMMC vmmc property for roth/tn7
ARM: dts: tegra: move serial aliases to per-board
ARM: tegra: Add serial port labels to Tegra124 DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Renesas ARM Based SoC DT Fixes for v3.18" from Simon Horman:
* Correct IIC0 parent clock on r8a7740
* Correct SD3CKCR address to device tree on r8a7790
* tag 'renesas-dt-fixes-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock
ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Renesas ARM Based SoC Fixes for v3.18" from Simon Horman:
* Set i2c clks_per_count to 2 on kzm9g
* tag 'renesas-soc-fixes-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the RTT and GPBR devices and specify the general purpose register
used to store the current time.
Enable wakeup on RTT event on the shutdown controller device.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
