The compatible strings have to be ordered from specific to generic.
This patch fixes this for STi boards, which did the exact opposite.
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
asid_cache must be unsigned long otherwise on 64 bit systems it will
become 0 if the value in get_new_mmu_context() reaches 0xffffffff and
in the end the assumption of ASID_FIRST_VERSION is not true anymore
thus leads to more dangerous things.
Initial patch by Yong Zhang <yong.zhang@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: libin <huawei.libin@huawei.com>
Pull staging driver fixes from Greg KH:
"Here are five staging driver fixes for 3.15-rc6 that resolve some
reported issues. They are for the imx and rtl8723au drivers"
* tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
staging: rtl8723au: Use correct pipe type for USB interrupts
imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'
imx-drm: imx-drm-core: skip components whose parent device is disabled
imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id
Pull crypto fixes from Herbert Xu:
"This fixes a NULL pointer dereference on allocation failure in caam,
as well as a regression in the ctr mode on s390 that was added with
the recent concurrency fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s390 - fix aes,des ctr mode concurrency finding.
crypto: caam - add allocation failure handling in SPRINTFCAT macro
Most of these tests should be runtime tests. This also finally means
that on a MIPS III systems MIPS IV opcodes are going to result in an
exception as they're supposed to.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The header file had no include guards; this only happened to work because
the file only contains macro definitions and protypes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull device tree fixes from Grant Likely:
"Drivercore bugfixes for v3.15
This branch contains bug fixes important to get into v3.15. There is
a fix for modifying properties seen during early boot, a fix for an
incorrect prototype when CONFIG_OF=n, and a couple of corrections to
device tree memory nodes on a few platforms"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
mips: dts: Fix missing device_type="memory" property in memory nodes
arm: dts: Fix missing device_type="memory" for ste-ccu8540
of: fix CONFIG_OF=n prototype of of_node_full_name()
of: make of_update_property() usable earlier in the boot process
Most archs with HAVE_ARCH_CALLER_ADDR have pretty much the same
definitions of CALLER_ADDRx(n). Instead of duplicating the code for all
the archs, define a ftrace_return_address0() and
ftrace_return_address(n) that can be overwritten by the archs if they
need to do something different. Instead of 7 macros in every arch, we
now only have at most 2 (and actually only 1 as
ftrace_return_address0() should be the same for all archs).
The CALLER_ADDRx(n) will now be defined in linux/ftrace.h and use the
ftrace_return_address*(n?) macros. This removes a lot of the duplicate
code.
Link: http://lkml.kernel.org/p/1400585464-30333-1-git-send-email-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a cmdline param which disables the microcode loader. This is useful
mostly in debugging situations where we want to turn off microcode
loading, both early from the initrd and late, as a means to be able to
rule out its influence on the machine.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1400525957-11525-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch add support for BCH16_ECC in GPMC (controller) driver:
- extends configuration space to include BCH16 registers
- extends parsing of DT binding for selecting BCH16 ecc-scheme
Signed-off-by: Pekon Gupta <pekon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
dma_declare_coherent_memory() needs both the CPU physical address and the
bus address of the device memory. They are the same on this platform, but
in general we should use pcibios_resource_to_bus() to account for any
address translation done by the PCI host bridge.
This makes no difference on Dreamcast, but is safer if the usage is copied
to future drivers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: Magnus Damm <damm@opensource.se>
CC: linux-sh@vger.kernel.org
Adding function type checking to CLK_OF_DECLARE found a type mismatch with
mx35_clocks_init_dt. The function should return void.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
The cpu_method_of_table is the oddball of the various OF linker sections.
In preparation to have common linker section definitions, align the
cpu_method_of_table with the other definitions for the naming and ending
with a blank struct.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Using arch_vma_name to give special mappings a name is awkward. x86
currently implements it by comparing the start address of the vma to
the expected address of the vdso. This requires tracking the start
address of special mappings and is probably buggy if a special vma
is split or moved.
Improve _install_special_mapping to just name the vma directly. Use
it to give the x86 vvar area a name, which should make CRIU's life
easier.
As a side effect, the vvar area will show up in core dumps. This
could be considered weird and is fixable.
[hpa: I say we accept this as-is but be prepared to deal with knocking
out the vvars from core dumps if this becomes a problem.]
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/276b39b6b645fb11e345457b503f17b83c2c6fd0.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The oops can be triggered in qemu using -no-hpet (but not nohpet) by
reading a couple of pages past the end of the vdso text. This
should send SIGBUS instead of OOPSing.
The bug was introduced by:
commit 7a59ed415f
Author: Stefani Seibold <stefani@seibold.net>
Date: Mon Mar 17 23:22:09 2014 +0100
x86, vdso: Add 32 bit VDSO time support for 32 bit kernel
which is new in 3.15.
This will be fixed separately in 3.15, but that patch will not apply
to tip/x86/vdso. This is the equivalent fix for tip/x86/vdso and,
presumably, 3.16.
Cc: Stefani Seibold <stefani@seibold.net>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/c8b0a9a0b8d011a8b273cbb2de88d37190ed2751.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Enable ARCH_SUPPORTS_BIG_ENDIAN in Kconfig.
zynq_secondary_trampoline is the first function
that is called on secondary CPU.
Reference:
"ARM: mcpm: fix big endian issue in mcpm startup code"
(sha1: 519ceb9fd1)
Fix early printk support. Based on:
"ARM: pl01x debug code endian fix"
(sha1: 76e3faf156)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Virtual address have to have the same offset within
a 2MB aligned section of virtual/phycial address space.
Fix uart0 virtual address to be align with physical one.
Also remove UART_SIZE which is completely unused.
Reported-by: Russ Smith <russells@google.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Provide information through SOC_BUS to user space.
Silicon revision is provided through devcfg device.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
mapping->size can be derived from mapping->bits << PAGE_SHIFT
which makes mapping->size as redundant.
Clean this up.
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for various loose ends:
- Fix workarounds for R4000 erratum.
- Patch up DEC, Siemens-Nixdorf and Loongson hardware support.
- Wire up renameat2 syscall.
- Delete unused file - it was causing false warnings from maintenance
scripts.
- Revert a patch because it's functionality is now implemented twice
which causes superfluous /proc/cpuinfo output.
- Fix a microMIPS regression"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: mm: Fix broken microMIPS kernel regression.
MIPS: Add new AUDIT_ARCH token for the N32 ABI on MIPS64
MIPS: Wire up renameat2 syscall.
MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
MIPS: Remove file missed when removing rm9k support a while ago.
MIPS/loongson2_cpufreq: Fix CPU clock rate setting
MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
MIPS: csum_partial.S CPU_DADDI_WORKAROUNDS bug fix
MIPS: __strncpy_from_user_asm CPU_DADDI_WORKAROUNDS bug fix
MIPS: __delay CPU_DADDI_WORKAROUNDS bug fix
MIPS: DEC/SNI: O32 wrapper stack switching fixes
MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
MAINTAINERS: TURBOchannel: Update entry
Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"
The out of line _raw_read_lock_wait_flags/_raw_write_lock_wait_flags
functions for the arch_read_lock_flags/arch_write_lock_flags calls
fail to re-enable the interrupts after another unsuccessful try to
get the lock with compare-and-swap. The following wait would be
done with interrupts disabled which is suboptimal.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
