Merge "omap dt fixes and and clocks for v3.16 merge window" from Tony Lindgren:
Most likely the last pull request from me for omap changes for
v3.16 that's dts fixes for clocks and enabling few features
that were still being discussed earlier:
- A bunch of omap clock related dts fixes queued by Tero Kristo.
- Enable parallel nand on am437x that was not merged earlier as
I requested more information about the muxing for it. And
we need to also enable ecc hardware support for am43xx.
- Enable the modem support for n900 that was dropped earlier
because we had to fix the related hwmod entry first with patch
ARM: OMAP2+: Fix ssi hwmod entry to allow idling.
- And finally, add the omap2 clock dts files. These will allow
us to enable the dt clocks and drop the legacy clocks for omap2
with a follow-up patch once the related clock driver binding
changes are merged.
* tag 'omap-for-v3.16/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap2 clock data
ARM: dts: am437x-gp-evm: add support for parallel NAND flash
ARM: OMAP2+: gpmc: enable BCH_HW ecc-scheme for AM43xx platforms
ARM: dts: omap3 a83x: fix duplicate usb pin config
ARM: dts: omap3: set mcbsp2 status
ARM: dts: omap3-n900: Add modem support
ARM: dts: omap3-n900: Add SSI support
ARM: OMAP2+: Fix ssi hwmod entry to allow idling
ARM: dts: AM4372: clk: efuse based crystal frequency detect
ARM: dts: am43xx-clocks.dtsi: add ti, set-rate-parent to display clock path
ARM: dts: omap5-clocks.dtsi: add ti, set-rate-parent to dss_dss_clk
ARM: dts: omap4: add twd clock to DT
ARM: dts: omap54xx-clocks: Correct abe_iclk clock node
ARM: dts: omap54xx-clocks: remove the autoidle properties for clock nodes
ARM: dts: am43x-clock: add tbclk data for ehrpwm
ARM: dts: am33xx-clock: Fix ehrpwm tbclk data
ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path
ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck
ARM: dts: am43xx-clocks: use ti, fixed-factor-clock for dpll_per_clkdcoldo
Signed-off-by: Olof Johansson <olof@lixom.net>
When targetting ARCH_MULTIPLATFORM, we may include support for SoCs with
PCI-capable devices (e.g. mach-virt with virtio-pci).
This patch allows PCI support to be selected for these SoCs by selecting
CONFIG_MIGHT_HAVE_PCI when CONFIG_ARCH_MULTIPLATFORM=y and removes the
individual selections from multi-platform enabled SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Samsung exynos-cpuidle updates for v3.16" from Kukjin Kim:
- From Daniel Lezcano:
This patchset relies on the cpm_pm notifier to initiate the
powerdown sequence operations from pm.c instead cpuidle.c.
Thus the cpuidle driver is no longer dependent from arch
specific code as everything is called from the pm.c file.
* tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (94 commits)
ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
ARM: EXYNOS: Move the driver to drivers/cpuidle directory
ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
ARM: EXYNOS: Pass the AFTR callback to the platform_data
ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
ARM: EXYNOS: Move the AFTR state function into pm.c
ARM: EXYNOS: Encapsulate the AFTR code into a function
ARM: EXYNOS: Disable cpuidle for exynos5440
ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
ARM: EXYNOS: Remove ifdef for scu_enable in pm
ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
ARM: EXYNOS: Use the cpu_pm notifier for pm
ARM: EXYNOS: Fix S5P_WAKEUP_STAT call for cpuidle
ARM: EXYNOS: Move some code inside the idle_finisher for cpuidle
ARM: EXYNOS: Encapsulate register access inside a function for pm
ARM: EXYNOS: Change function name prefix for cpuidle
ARM: EXYNOS: Use cpuidle_register
ARM: EXYNOS: Prevent forward declaration for cpuidle
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Samsung clock updates for 3.16" from Kukjin Kim:
In this time, it is having dependency with arch/arm/ for 3.16,
I pulled them into samsung tree from Tomasz under agreement from Mike.
- Pull for_3.16/exynos5260 from Tomasz Figa:
"This pull request contains patches preparing Samsung Common Clock Framework
helpers to support Exynos5260 by adding support for multiple clock providers
and then adding clock driver for Exynos5260."
- Pull for_3.16/clk_fixes_non_critical from Tomasz Figa:
"This pull requests contains a number of non-critical fixes for Samsung clock
framework and drivers, including:
1) a series of fixes for Exynos5420 to correct clock definitions and make the
driver closer to the documentation,
2) several missing clocks and clock IDs added to Exynos4, Exynos5250 and
Exynos5420 drivers,
3) fix for incorrect initialization of clock table with NULL,
4) compiler warning fix."
- Pull for_3.16/clk_cleanup from Tomasz Figa:
"This pull requests contains minor clean-up related to Samsung clock
support, including:
1) move Kconfig entries of Samsung clock drivers to drivers/clk,
2) compile drivers/clk/samsung conditionally when COMMON_CLK_SAMSUNG is
selected,
3) remove obsolete Kconfig lines after moving s3c24xx to CCF."
- Pull for_3.16/exynos3250 from Tomasz Figa:
"This small pull request contains a patch adding clock driver for Exynos3250,
which depends on previous pull requests in this series."
- add dt bindings for exynos3250 clock
- add exynos5800 specific clocks in current exynos5420 clock
Note that this branch is based on s3c24xx ccf branch
* tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (59 commits)
clk: exynos5420: Add 5800 specific clocks
dt-bindings: add documentation for Exynos3250 clock controller
ARM: S3C24XX: fix merge conflict
clk: samsung: exynos3250: Add clocks using common clock framework
drivers: clk: use COMMON_CLK_SAMSUNG for Samsung clock support
ARM: S3C24XX: move S3C24XX clock Kconfig options to Samsung clock Kconfig file
ARM: select COMMON_CLK_SAMSUNG for ARCH_EXYNOS and ARCH_S3C64XX
clk: samsung: add new Kconfig for Samsung common clock option
ARM: S3C24XX: Remove omitted Kconfig selects and conditionals
clk: samsung: exynos5420: add more registers to restore list
clk: samsung: exynos5420: add misc clocks
clk: samsung: exynos5420: update clocks for MAU Block
clk: samsung: exynos5420: fix register offset for sclk_bpll
clk: samsung: exynos5420: correct sysmmu-mfc parent clocks
clk: samsung: exynos5420: update clocks for FSYS and FSYS2 blocks
clk: samsung: exynos5420: update clocks for WCORE block
clk: samsung: exynos5420: update clocks for PERIS and GEN blocks
clk: samsung: exynos5420: update clocks for PERIC block
clk: samsung: exynos5420: update clocks for DISP1 block
clk: samsung: exynos5420: update clocks for G2D and G3D blocks
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Exynos MCPM support for v3.16" from Kukjin Kim:
- adding MCPM backend support for SMP secondary boot and core switching
on Samsung's Exynos5420.
Tested on exynos5420-smdk5420 and exynos5420 based chromebook (peach-pit)
using the "/dev/b.L_switcher" user interface. Secondary core boot-up has
also been tested on both the boards.
* tag 'exynos-mcpm' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Add MCPM call-back functions
ARM: dts: add CCI node for exynos5420
ARM: EXYNOS: Add generic cluster power control functions
ARM: EXYNOS: use generic exynos cpu power control functions
ARM: EXYNOS: Add generic cpu power control functions for exynos SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Samsung 2nd DT updates for v3.16" from Kukjin Kim:
exynos4
- add hsotg device, exynos_usbphy nodes
- add PMU syscon and audio subsystem nodes
- replace number by macro in clock binding
exynos4210-universal_c210
- add external sd card node and multimedia nodes
- enable USB functionality
exynos4412-trats2
- enable usb nodes and usb gagdet functionality
- add cm36651 light/proximity sensor node
- fixed gpio key node
exynos5250 and exynos5420
- add pmu syscon handle and sysreg system controller nodes
- add support for usb2phy
- replace number by macro in clock binding
- add USB 2.0 support on exynos5420
exynos5420-peach-pit
- move dp hpd gpio pin to pinctrl_0
* tag 'samsung-dt-2' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (21 commits)
ARM: dts: enable usb nodes for exynos4412-trats2
ARM: dts: add hsotg device node for exynos4
ARM: dts: add exynos_usbphy node for exynos4
ARM: dts: add PMU syscon node for exynos4
ARM: dts: add pmu syscon handle to exynos5420 hdmi
ARM: dts: add pmu syscon handle to exynos5250 hdmi
ARM: dts: replace number by macro in clock binding for exynos5420
ARM: dts: replace number by macro in clock binding for exynos5250
ARM: dts: replace number by macro in clock binding for exynos4
ARM: dts: add external sd card node for exynos4210-universal_c210
ARM: dts: add multimedia nodes for exynos4210-universal_c210
ARM: dts: enable USB functionality for exynos4210-universal_c210
ARM: dts: Enable USB gadget functionality for exynos4210-trats
ARM: dts: Add audio subsystem nodes to exynos4.dtsi
ARM: dts: fixed gpio key node for exynos4412-trats2
ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2
ARM: dts: Add USB 2.0 support on exynos5420
ARM: dts: Add usb2phy support on exynos5420
ARM: dts: Add usb2phy to exynos5250
ARM: dts: Add sysreg sytem controller node to exynos5250 and exynos5420
...
Merge "Samsung cleanup for v3.16" from Kukjin Kim:
- use a common macro v7_exit_coherency_flush macro instead of local function
- cleanup mach-exynos/Makefile and remove inclusion plat/cpu.h in mach-exynos
- migrate exynos macros from plat-samsung to mach-exynos
- cleanup s3c24xx debug macro/earlyprintk to remove arch dependency
- fixed compilation error for cpufreq due to moving header in this branch
: use of_machine_is_compatible() instead of soc_is_exynos...()
Note that based on tags/samsung-clk and tags/samsung-fixes.
* tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: dts: Remove g2d_pd node for exynos5420
ARM: dts: Remove mau_pd node for exynos5420
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
ARM: dts: disable MDMA1 node for exynos5420
ARM: EXYNOS: fix the secondary CPU boot of exynos4212
Signed-off-by: Olof Johansson <olof@lixom.net>
Add device-tree file for APQ8084-MTP board, which belongs
to the Snapdragon 805 family.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add support for the Qualcomm Snapdragon 805 APQ8084 SoC. It is
used on APQ8084-MTP and other boards.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add information about the APQ8084 debug UART physical and virtual
addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add basic APQ8064 SoC include device tree and support for basic booting on
the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted
order.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-msm8660-surf.dts)
* Cleanup cpu node to match binding spec, enable-method and compatible
should be per cpu, not part of the container
* Add GSBI node and configuration of GSBI controller
Signed-off-by: Kumar Gala <galak@codeaurora.org>
* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-msm8960-cdp.dts)
* Cleanup cpu node to match binding spec, enable-method and compatible
should be per cpu, not part of the container
* Drop interrupts property from l2-cache node as its not part of the
binding spec
* Add GSBI node and configuration of GSBI controller
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Commit 9c7e535fcc ("arm64: mm: Route pmd thp functions through pte
equivalents") changed the pmd manipulator and accessor functions to
convert the target pmd to a pte, process it with the pte functions, then
convert it back. Along the way, we gained support for PTE_WRITE, however
this is completely ignored by set_pmd_at, and so we fail to set the
PMD_SECT_RDONLY for PMDs, resulting in all sorts of lovely failures (like
CoW not working).
Partially reverting the offending commit (by making use of
PMD_SECT_RDONLY explicitly for pmd_{write,wrprotect,mkwrite} functions)
leads to further issues because pmd_write can then return potentially
incorrect values for page table entries marked as RDONLY, leading to
BUG_ON(pmd_write(entry)) tripping under some THP workloads.
This patch fixes the issue by routing set_pmd_at through set_pte_at,
which correctly takes the PTE_WRITE flag into account. Given that
THP mappings are always anonymous, the additional cache-flushing code
in __sync_icache_dcache won't impose any significant overhead as the
flush will be skipped.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch allows system call entry or exit to be traced as ftrace events,
ie. sys_enter_*/sys_exit_*, if CONFIG_FTRACE_SYSCALLS is enabled.
Those events appear and can be controlled under
${sysfs}/tracing/events/syscalls/
Please note that we can't trace compat system calls here because
AArch32 mode does not share the same syscall table with AArch64.
Just define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS in order to avoid unexpected
results (bogus syscalls reported or even hang-up).
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
CALLER_ADDRx returns caller's address at specified level in call stacks.
They are used for several tracers like irqsoff and preemptoff.
Strange to say, however, they are refered even without FTRACE.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch allows "dynamic ftrace" if CONFIG_DYNAMIC_FTRACE is enabled.
Here we can turn on and off tracing dynamically per-function base.
On arm64, this is done by patching single branch instruction to _mcount()
inserted by gcc -pg option. The branch is replaced to NOP initially at
kernel start up, and later on, NOP to branch to ftrace_caller() when
enabled or branch to NOP when disabled.
Please note that ftrace_caller() is a counterpart of _mcount() in case of
'static' ftrace.
More details on architecture specific requirements are described in
Documentation/trace/ftrace-design.txt.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch implements arm64 specific part to support function tracers,
such as function (CONFIG_FUNCTION_TRACER), function_graph
(CONFIG_FUNCTION_GRAPH_TRACER) and function profiler
(CONFIG_FUNCTION_PROFILER).
With 'function' tracer, all the functions in the kernel are traced with
timestamps in ${sysfs}/tracing/trace. If function_graph tracer is
specified, call graph is generated.
The kernel must be compiled with -pg option so that _mcount() is inserted
at the beginning of functions. This function is called on every function's
entry as long as tracing is enabled.
In addition, function_graph tracer also needs to be able to probe function's
exit. ftrace_graph_caller() & return_to_handler do this by faking link
register's value to intercept function's return path.
More details on architecture specific requirements are described in
Documentation/trace/ftrace-design.txt.
Reviewed-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Recordmcount utility under scripts is run, after compiling each object,
to find out all the locations of calling _mcount() and put them into
specific seciton named __mcount_loc.
Then linker collects all such information into a table in the kernel image
(between __start_mcount_loc and __stop_mcount_loc) for later use by ftrace.
This patch adds arm64 specific definitions to identify such locations.
There are two types of implementation, C and Perl. On arm64, only C version
is used to build the kernel now that CONFIG_HAVE_C_RECORDMCOUNT is on.
But Perl version is also maintained.
This patch also contains a workaround just in case where a header file,
elf.h, on host machine doesn't have definitions of EM_AARCH64 nor
R_AARCH64_ABS64. Without them, compiling C version of recordmcount will
fail.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
walk_stackframe() calls unwind_frame(), and if walk_stackframe() is
"notrace", unwind_frame() should be also "notrace".
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since insn.h is indirectly included in asm/entry-ftrace.S,
we need to exclude some declarations by __ASSEMBLY__.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This adds support for the tsc2005 touchscreen
to the Nokia N900 DTS file.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* pci/misc:
PCI: Fix return value from pci_user_{read,write}_config_*()
PCI: Turn pcibios_penalize_isa_irq() into a weak function
PCI: Test for std config alias when testing extended config space
* pci/hotplug:
PCI: cpqphp: Fix possible null pointer dereference
NVMe: Implement PCIe reset notification callback
PCI: Notify driver before and after device reset
* pci/pci_is_bridge:
pcmcia: Use pci_is_bridge() to simplify code
PCI: pciehp: Use pci_is_bridge() to simplify code
PCI: acpiphp: Use pci_is_bridge() to simplify code
PCI: cpcihp: Use pci_is_bridge() to simplify code
PCI: shpchp: Use pci_is_bridge() to simplify code
PCI: rpaphp: Use pci_is_bridge() to simplify code
sparc/PCI: Use pci_is_bridge() to simplify code
powerpc/PCI: Use pci_is_bridge() to simplify code
ia64/PCI: Use pci_is_bridge() to simplify code
x86/PCI: Use pci_is_bridge() to simplify code
PCI: Use pci_is_bridge() to simplify code
PCI: Add new pci_is_bridge() interface
PCI: Rename pci_is_bridge() to pci_has_subordinate()
* pci/virtualization:
PCI: Introduce new device binding path using pci_dev.driver_override
Conflicts:
drivers/pci/pci-sysfs.c
* pci/host-exynos:
PCI: exynos: Remove unnecessary OOM messages
* pci/host-rcar:
PCI: rcar: Add gen2 device tree support
PCI: rcar: Add R-Car PCIe device tree bindings
PCI: rcar: Add MSI support for PCIe
PCI: rcar: Add Renesas R-Car PCIe driver
PCI: rcar: Use new OF interrupt mapping when possible
* pci/amd-numa:
x86/PCI: Clean up and mark early_root_info_init() as deprecated
x86/PCI: Work around AMD Fam15h BIOSes that fail to provide _PXM
x86/PCI: Warn if we have to "guess" host bridge node information
Put architecture-specific assembly code where it belongs,
allowing for support of additional architectures such as arm64 in
the future.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On sam9x5, dedicated CTS (and RTS) pins are unusable together with the
LCDC, the EMAC, or the MMC because they share the same line.
Moreover, the USART controller doesn't handle DTR/DSR/DCD/RI signals,
so we have to control them via GPIO.
This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI
signals.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove obsolete calls to strict_strto* and replace them
with kstrto* calls accordingly.
Signed-off-by: Daniel Walter <dwalter@google.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-apq8074-dragonboard.dts)
* Move spi pinctrl into board file
* Cleanup cpu node to match binding spec, enable-method and compatible
should be per cpu, not part of the container
* Drop interrupts property from l2-cache node as its not part of the
binding spec
* Move timer node out of SoC container
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Now that CONFIG_USB_DEBUG is gone, remove it from a number of defconfig
files that were enabling it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The content of /sys/devices/system/cpu/cpu*/online is still 1 for those
CPUs that the switcher has removed even though the global state in
/sys/devices/system/cpu/online is updated correctly.
It turns out that commit 0902a9044f ("Driver core: Use generic
offline/online for CPU offline/online") has changed the way those files
retrieve their content by relying on on the generic attribute handling
code. The switcher, by calling cpu_down() directly, bypasses this
handling and the attribute value doesn't get updated.
Fix this by calling device_offline()/device_online() instead.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The CONFIG_MIPS_CPS SMP implementation should be able to handle all
cases the CONFIG_MIPS_CMP implementation does, but without requiring
bootloader assistance. It is also required in order to make use of
features such as hotplug & cpuidle core power gating. Enable it by
default for Malta configs that previously enabled the now deprecated
CONFIG_MIPS_CMP, and disable the latter. The local version suffix "cmp"
is removed rather than replaced with "cps" since there are other ways to
tell that the CPS SMP implementation is in use (the "VPE topology" line
in the boot log being one).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
This patch adds a cpuidle driver for systems based around the MIPS
Coherent Processing System (CPS) architecture. It supports four idle
states:
- The standard MIPS wait instruction.
- The non-coherent wait, clock gated & power gated states exposed by
the recently added pm-cps layer.
The pm-cps layer is used to enter all the deep idle states. Since cores
in the clock or power gated states cannot service interrupts, the
gic_send_ipi_single function is modified to send a power up command for
the appropriate core to the CPC in cases where the target CPU has marked
itself potentially incoherent.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
This patch simply includes the cpuidle Kconfig entries in preparation
for cpuidle drivers used on MIPS systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Defines a macro intended to allow trivial use of the regular MIPS wait
instruction from cpuidle drivers, which may simply invoke the macro
within their array of states.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from
the boot CPU. This allows overrides of the CCA using the cca= kernel
parameter to take effect on all CPUs for consistency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
This patch sets a default CCA suited for use with multi-core SMP on all
current MIPS CPS based systems. It may still be overriden by the cca=
argument on the kernel command line.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
If the user or bootloader sets the CCA to a value which is not suited
for multi-core SMP (ie. anything non-coherent) then limit the system to
using only a single core and warn the user.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
This patch adds support for offlining CPUs via hotplug when using the
CONFIG_MIPS_CPS SMP implementation. When a CPU is offlined one of 2
things will happen:
- If the CPU is part of a core which implements the MT ASE and there
is at least one other VPE online within that core then the VPE will
be halted by settings its TCHalt bit.
- Otherwise if supported the core will be powered down via the CPC.
- Otherwise the CPU will hang by executing an infinite loop.
Bringing CPUs back online is then a process of either clearing the
appropriate VPEs TCHalt bit or powering up the appropriate core via the
CPC. Throughout the process the struct core_boot_config vpe_mask field
must be maintained such that mips_cps_boot_vpes will start & stop the
correct VPEs.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
This patch adds code to generate entry & exit code for various low power
states available on systems based around the MIPS Coherent Processing
System architecture (ie. those with a Coherence Manager, Global
Interrupt Controller & for >=CM2 a Cluster Power Controller). States
supported are:
- Non-coherent wait. This state first leaves the coherent domain and
then executes a regular MIPS wait instruction. Power savings are
found from the elimination of coherency interventions between the
core and any other coherent requestors in the system.
- Clock gated. This state leaves the coherent domain and then gates
the clock input to the core. This removes all dynamic power from the
core but leaves the core at the mercy of another to restart its
clock. Register state is preserved, but the core can not service
interrupts whilst its clock is gated.
- Power gated. This deepest state removes all power input to the core.
All register state is lost and the core will restart execution from
its BEV when another core powers it back up. Because register state
is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP
implementation in order for the core to exit the state successfully.
The code will detect which states are available on the current system
during boot & generate the entry/exit code for those states. This will
be used by cpuidle & hotplug implementations.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
The core which the CPC core-other region relates to is based upon the
core-local core-other addressing register. As its name suggests this
register is shared between all VPEs within a core, and if there is a
possibility that multiple VPEs within a core will attempt to access
another core simultaneously then locking is required. This wasn't
previously a problem with the only user being cpu0 during boot, but will
be an issue once hotplug is implemented & may race with other users such
as cpuidle.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
