Merge "ARM: mach-bcm soc updates" from Matt Porter:
- add BCM5301x support
- remove GENERIC_TIME
* tag 'armsoc/for-3.15/soc-2' of git://github.com/broadcom/mach-bcm:
ARM: BCM5301X: workaround suppress fault
ARM: BCM5301X: add early debugging support
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
ARM: mach-bcm: Remove GENERIC_TIME
Signed-off-by: Olof Johansson <olof@lixom.net>
Keystone SOC updates for 3.15
- Enable Watchdog and GPIO config
- Enable LED driver config
- Enable NAND and EMIF driver config
* tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: config: keystone: enable AEMIF/NAND support
ARM: config: keystone: enable led support
ARM: config: keystone: enable gpio support
ARM: config: keystone: enable watchdog support
On the newly introduced sama5d36, Gigabit and 10/100 Ethernet network
interfaces are probed in a different order than for the sama5d35.
Moreover, users are accustomed to this order in bootloaders and backports
for older kernel revisions.
So this patch switches DT node order as it is done for the other dual-Ethernet
sama5d3 SoC.
Better interface numbering which does not depend on DT node order is being
developed for stronger interface identification.
Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
All Samsung platforms now use the generic uncompress.h so all the
custom ones can be removed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
All Samsung platforms, not only Exynos, use the custom uncompress.h
simply to setup the uart for the initial debug output. This can also
be done using the generic uncompress.h.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch selects reset controller support for ARCH_STI and
selects the reset controllers for STiH415 and STiH416 SoCs.
Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch adds IRB support to STiH416 platforms.
Tested on B2000 and B2020 development board
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds IRB support to STiH415 platforms.
Tested on B2000 and B2020 development boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds support to STiH416 SOC, which has two ethernet
snps,dwmac controllers version 3.710. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.
Tested on both B2020 and B2000.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds support to STiH415 SOC, which has two ethernet
snps,dwmac controllers version 3.610. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.
Tested on both B2020 and B2000.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds soft reset controller support for STiH415 and adds new
softreset lines required for other device tree nodes in the header file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds a reset controller node to the SOC device tree and also
adds new header files with reset lines required for other device tree
nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds soft reset controller support for STiH415 and adds new
softreset lines required for other device tree nodes in the header file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This patch adds a reset controller node to the SOC device tree and also
adds new header files with reset lines required for other device tree
nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Add the "atmel,nand-has-dma" property to NAND node for SoC that
can use the DMA to perform NAND accesses.
Use of this property was added in 1b7192658a
(mtd: atmel_nand: add a new dt binding item for nand dma support).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Select CONFIG_EMBEDDED as it it useful for that board.
Also select CONFIG_MTD_UBI to really enable UBIfs (CONFIG_FS_UBIFS depends on
it).
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
A few configuration symbols are deprecated and disappeared a few versions ago,
remove them.
CONFIG_FPE_NWFPE depends on OABI_COMPAT which was not selected.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The defconfig for the at91sam9rl is quite old, refresh it:
- now uses EABI instead of OABI
- add devtmpfs support
- add UBI/UBIfs support
- remove a few config symbols that disappeared
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable ARM_HAS_SG_CHAIN for all multiplatform targets, it makes sense
to enable on all "modern" platforms; downsides are limited for platforms
that don't need it.
Requested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
commit[7e0b4cd dts: socfpga: Add DTS entry for adding the stmmac glue
layer for stmmac.] references the sysmgr through its phandle. This patch
adds the appropriate sysmgr node for the gmac to use.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Introduce "altr,socfpga-dw-mshc" to enable Altera's SOCFPGA platform
specific implementation of the dw_mmc driver.
Also add the "syscon" binding to the "altr,sys-mgr" node. The clock
driver can use the syscon driver to toggle the register for the SD/MMC
clock phase shift settings.
Finally, fix an indentation error for the sysmgr node.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Chris Ball <chris@printf.net>
Pull ARM SoC fixes from from Olof Johansson:
"A collection of fixes for ARM platforms. A little large due to us
missing to do one last week, but there's nothing in particular here
that is in itself large and scary.
Mostly a handful of smaller fixes all over the place. The majority is
made up of fixes for OMAP, but there are a few for others as well. In
particular, there was a decision to rename a binding for the Broadcom
pinctrl block that we need to go in before the final release since we
then treat it as ABI"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
ARM: tegra: add LED options back into tegra_defconfig
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
ARM: OMAP3: Fix pinctrl interrupts for core2
pinctrl: Rename Broadcom Capri pinctrl binding
pinctrl: refer to updated dt binding string.
Update dtsi with new pinctrl compatible string
ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP
ARM: OMAP2+: Add support for thumb mode on DT booted N900
ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
ARM: DRA7: hwmod data: correct the sysc data for spinlock
ARM: OMAP5: PRM: Fix reboot handling
ARM: sunxi: dt: Change the touchscreen compatibles
ARM: sun7i: dt: Fix interrupt trigger types
i.MX SoC changes for 3.15 from Shawn Guo:
- Support suspend from ocram (DDR IO floating) for imx6 platforms
- Add cpuidle support for imx6sl
- Sparse warning fixes for imx6sl and vf610 clock code
- Remove PWM platform code
- Support ptp and rmii clock from pad
- Support WEIM CS GPR configuration
- Random cleanups and defconfig updates
* tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (373 commits)
ARM: imx6: drop .text.head section annotation from headsmp.S
ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
ARM: imx6: rename pm-imx6q.c to pm-imx6.c
ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
ARM: imx6: call suspend_set_ops() from suspend routine
ARM: imx6: build headsmp.o only on CONFIG_SMP
ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
bus: imx-weim: support CS GPR configuration
ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53
ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
ARM: imx: add speed grading check for i.mx6 soc
ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
ARM: imx6q: support ptp and rmii clock from pad
ARM: imx6q: remove unneeded clk lookups
ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
...
i.MX6 device tree changes for 3.15, take 2 from Shawn Guo:
- Add USB, GPMI and SATA support for imx6q-phytec board
- Update imx6sl-evk board support regarding PFUZE100, audio and
LED etc.
- Minor updates on a few imx6qdl boards
* tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: imx6q-phytec: Added SATA Support
ARM: dts: imx6q-phytec: Added GPMI-NAND Support
ARM: dts: imx6q-phytec: Added USB_HOST Support
ARM: dts: imx6q-phytec: Added USB_OTG Support
ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
ARM: dts: imx6qdl-sabreauto: Support debug LED
ARM: dts: imx6q: add 852MHz setpoint for CPU freq
ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
ARM: dts: imx6sl-evk: Add debug LED support
ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support
ARM: dts: imx6sl-evk: Add audio support
ARM: dts: imx6sl-evk: Add PFUZE100 support
ARM: dts: imx6qdl-sabresd: correct gpio key's active state
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: sirf: machine update for 3.15 from Barry Song:
Most of the below are some minor fixes for coding style. "ARM: prima2:
move to generic reset controller driver framework" has been ready near
3.14 merge window, but it was late to merge in 3.14, so move this one
to 3.15.
* tag 'sirf-soc-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: prima2: move to generic reset controller driver framework
ARM: prima2: staticize sirfsoc_init_late function
ARM: prima2: rtciobrg: fix the typo about license
ARM: prima2: common: fix checkpatch issues
ARM: prima2: platsmp: fix checkpatch issues
ARM: prima2: l2x0: fix checkpatch issues
Signed-off-by: Olof Johansson <olof@lixom.net>
A set of device tree-related cleanups for the ux500 platform from Linus
Walleij:
- Rename SSP/SPI clocks to the name found in the hardware
reference manual. (Also includes a rename in the U300
device tree file.)
- Delete dead non-DT code.
- Drop now completely unused GPIO definition header file.
- Delete all hardcoded IRQ number assignments. This hits
MFD a bit so the patch has been ACKed by Lee Jones from
the MFD side.
* tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
mfd: dbx500/abx500: root out hardcoded IRQ assignments
ARM: ux500: drop a chunk of GPIO definitions
ARM: ux500: skip GIC CPU and dist address checks
ARM: ux500: delete pointless DT config option
ARM: u300: switch SSP/SPI clock name to "SSPCLK"
ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung exynos clock related DT updates for v3.15 from Kukjim Kim:
- use macros instead of hard coded numbers for clock bindings
NOTE: this is based on v3.15-next/dt-samsung
* tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: use macros in clock bindings for exynos5440
ARM: dts: use macros in clock bindings for exynos5420
ARM: dts: use macros in clock bindings for exynos5250
ARM: dts: use macros in clock bindings for exynos4
Samsung DT updates for v3.15 from Kukjin Kim:
For exynos4412
- update vdd_arm voltage range for odroidx board
For exynos5250
- add PMU sysreg node and update watchdog node
- re-organize RTC status
- add max77686 pmic node for smdk5250
For exynos5420
- add PMU sysreg, i2s, adma and watchdog nodes
- re-organize RTC status
- add fixed voltage regulators and regulator nodes
for smdk5420
- add PMIC, GPIO based wake up key and vmmc-supply
support for arndale-octa board
* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add vmmc-supply to MMC on arndale-octa board
ARM: dts: Add wake up key to arndale-octa board
ARM: dts: Add PMIC support to arndale-octa board
ARM: dts: Add fixed voltage regulators to smdk5420
ARM: dts: Add I2S nodes to exynos5420
ARM: dts: Add ADMA node to exynos5420
ARM: dts: Re-organize RTC status for exynos5250
ARM: dts: Re-organize RTC status for exynos5420
ARM: dts: Add regulator entries to smdk5420
ARM: dts: add max77686 pmic node for smdk5250
ARM: dts: update vdd_arm voltage range for exynos4412 based boards
ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge OMAP crossbar support from Tony Lindgren:
Add support for GIC crossbar that routes interrupts on newer omaps.
Looks like people wanted these merged via the omap tree as it's
the only user for the GIC crossbar.
* tag 'omap-for-v3.15/crossbar-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA: Enable Crossbar IP support for DRA7XX
ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number
DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
Signed-off-by: Olof Johansson <olof@lixom.net>
Power, reset and clock related changes via Paul Walmsley <paul@pwsan.com>, via
Tony Lindgren:
Some low-level optimizations and fixes that don't belong in an -rc
series for various OMAP-family chips, targeted for v3.15.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/prcm-a-for-v3.15/20140228124518/
* tag 'omap-for-v3.15/prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
ARM: OMAP2+: clock: fix rate prints
ARM: AM43x: hwmod data: register spinlock OCP interface
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
ARM: OMAP2+: AM43xx: implement support for machine restart
Signed-off-by: Olof Johansson <olof@lixom.net>
OMAP SoC changes from Tony Lindgren:
Few SoC related improvments for omaps.
* tag 'omap-for-v3.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
ARM: OMAP2+: AM43x: Use gptimer as clocksource
ARM: OMAP2+: AM43x: determine features
ARM: OMAP2+: AM43x: Add ID for ES1.1
ARM: OMAP2+: AM43x: enable in default config
Signed-off-by: Olof Johansson <olof@lixom.net>
From Tony Lindgren:
Two omap3430 vs 3630 device tree regression fixes for
issues booting 3430 based boards.
* tag 'omap-for-v3.14/fixes-dt-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge more Integrator multiplatform patches for v3.15 from Linus Walleij:
- Remove all dangling header files in <mach/*> from the global
namespace and push them down into the mach-integrator folder.
- Decouple the Integrator from the plat-versatile sched_clock
implementation.
* tag 'integrator-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: register sched_clock directly
ARM: integrator: localize the hardware.h header
ARM: integrator: merge platform.h to hardware.h
ARM: integrator: localize the impd1.h header
ARM: integrator: localize the lm.h header
Signed-off-by: Olof Johansson <olof@lixom.net>
* integrator/multiplatform-base:
ARM: integrator: select GPIO block
ARM: integrator: register the IM-PD1 VIC
ARM: integrator: use managed resources for the IM-PD1
irqchip: support cascaded VICs
irqchip: vic: update the base IRQ member correctly
clk: versatile: respect parent rate in ICST clock
clk: versatile: pass a parent to the ICST clock
ARM: integrator: switch to fetch clocks from device tree
ARM: SP804: make Integrator/CP timer pick clock from DT
ARM: integrator: define clocks in the device trees
Merge 'bcm pinctrl rename' From Christin Daudt:
Rename pinctrl dt binding to restore consistency with other bcm mobile
bindings.
* tag 'bcm-for-3.14-pinctrl-reduced-rename' of git://github.com/broadcom/bcm11351:
pinctrl: Rename Broadcom Capri pinctrl binding
pinctrl: refer to updated dt binding string.
Update dtsi with new pinctrl compatible string
+ Linux 3.14-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner fixes from Maxime Ripard:
Two fixes for device trees additions that got added in 3.14. One fixes the
interrupt types of some IPs, the other fixes up a compatible that got
introduced during 3.14
* tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux:
ARM: sunxi: dt: Change the touchscreen compatibles
ARM: sun7i: dt: Fix interrupt trigger types
Signed-off-by: Olof Johansson <olof@lixom.net>
