Add missing resource tracking for XRC domains and complete the tracking for HCA
network flow counters.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the slave and master resources are deleted after master freed
all bitmaps. If any resources were not properly cleaned up during the
shutdown process, an Oops would result.
Fix so that delete slave (only) resources during cleanup. Master resources
are cleaned up during unload process, and need not separately be cleaned.
Note that during cleanup, we need to split the resource-tracker freeing
functionality.
Before removing all the bitmaps, we free any leftover slave resources.
However, we can only remove the resource tracker linked list after
all bitmap frees, since some of the freeing functions (e.g.,
mlx4_cleanup_eq_table) use paravirtualized FW commands which expect
the resource tracker linked list to be present.
Found-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consider the following scenario: 2 HCAs, where only one of which can run SRIOV.
If we reset the module parameter, all the VFs of the SRIOV HCA will be
claimed by the PPF host (-- the code relies on num_vfs being non-zero
to avoid this claiming, and num_vfs was reset when pci_enable_sriov failed
for the non-SRIOV HCA).
The solution is not to touch the num_vfs parameter.
Also, eliminate the unneeded check of num_vfs when disabling sriov
(the dev flag bit is sufficient).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function mlx4_INIT_PORT_wrapper, the port state mask for the
slave is only set if we are invoking the INIT_PORT fw command.
However, the reference count for the (initialized) port is
incremented anyway.
This creates a problem in that when we have multiple slaves,
then the CLOSE_PORT command will never be invoked. The
reason is that in the CLOSE_PORT wrapper, if the port-state
mask is zero for the slave (which it is), the wrapper returns
without doing anything. The only slave which will not return
immediately in the CLOSE_PORT wrapper is that slave for which
INIT_PORT was invoked.
The fix is to not have the port-state mask setting depend
on the logic for calling the INIT_PORT fw command.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the compiler warnings on variables which are set but not used
by removing the relevant variable or casting a return value which is
ignored on purpose to void.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
While moving the struct boardtype, convert it to C99 initializers
to improve code readability. This results is a slight increase in
the total lines of code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This represents the mass deletion of the of the tokenring support.
It gets rid of:
- the net/tr.c which the drivers depended on
- the drivers/net component
- the Kbuild infrastructure around it
- any tokenring related CONFIG_ settings in any defconfigs
- the tokenring headers in the include/linux dir
- the firmware associated with the tokenring drivers.
- any associated token ring documentation.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
dbg() is a usb-serial specific macro. This patch converts
the generic.c driver to use dev_dbg() instead to tie into the
dynamic debug infrastructure.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbg() is a usb-serial specific macro. This patch converts
the f81232.c driver to use dev_dbg() instead to tie into the
dynamic debug infrastructure.
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbg() is a usb-serial specific macro. This patch converts
the belkin_sa.c driver to use dev_dbg() instead to tie into the
dynamic debug infrastructure.
CC: William Greathouse <wgreathouse@smva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few patches ago, I removed the reset_resume callback in this driver.
Now that the usb-serial core supports reset_resume, put this driver
callback back as well, so it should work identically to how it was
originally.
Now if this function really is doing what it should be doing, well,
that's a different story, but we are at least doing the identical thing
that we were before...
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Anton Samokhvalov <pg83@yandex.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few patches ago, I removed the reset_resume callback, changing it to
resume instead. Now that the usb-serial core supports reset_resume, put
this driver callback back as well, so it should work identically to how
it was originally.
Now if this function really is doing what it should be doing, well,
that's a different story, but we are at least doing the identical thing
that we were before...
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The callback is now hooked up for any USB to serial driver that wants
it. We only register the callback if any of the usb-serial structures
want it, this keeps the USB core happy.
Thanks to Alan Stern for the ideas on how to do this.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
