When doing an asynchronous page flip (PAGE_FLIP ioctl with the
DRM_MODE_PAGE_FLIP_ASYNC flag set), the current code waits for the
possible GPU buffer being rendered through a call to
vc4_queue_seqno_cb().
On the BCM2835-37, the GPU driver is part of the vc4 driver and that
function is defined in vc4_gem.c to wait for the buffer to be rendered,
and once it's done, call a callback.
However, on the BCM2711 used on the RaspberryPi4, the GPU driver is
separate (v3d) and that function won't do anything. This was working
because we were going into a path, due to uninitialized variables, that
was always scheduling the callback.
However, we were never actually waiting for the buffer to be rendered
which was resulting in frames being displayed out of order.
The generic API to signal those kind of completion in the kernel are the
DMA fences, and fortunately the v3d drivers supports them and signal
when its job is done. That API also provides an equivalent function that
allows to have a callback being executed when the fence is signalled as
done.
Let's change our driver a bit to rely on the previous function for the
older SoCs, and on DMA fences for the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20220610115149.964394-14-maxime@cerno.tech
The function vc4_async_page_flip() handles asynchronous page-flips in
the vc4 driver.
However, it mixes some generic code with code that should only be run on
older generations that have the GPU handled by the vc4 driver.
Let's split the generic part out of vc4_async_page_flip() and into a
common function that we be reusable by an handler made for the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-12-maxime@cerno.tech
On the BCM2711, we currently call the vc4_bo_cache_init() and
vc4_gem_init() functions. These functions initialize the BO and GEM
backends.
However, this code was initially created to accomodate the requirements
of the GPU on the older SoCs, while the BCM2711 has a separate driver
for it. So let's just skip these calls when we're on a newer hardware.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-9-maxime@cerno.tech
On the BCM2711, our current definition of drm_plane_helper_funcs uses
the custom vc4_prepare_fb() and vc4_cleanup_fb().
Those functions rely on the buffer allocation path that was relying on
the GPU, and is no longer relevant.
Let's create another drm_plane_helper_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
On the BCM2711, our current definition of drm_mode_config_funcs uses the
custom vc4_fb_create().
However, that function relies on the buffer allocation path that was
relying on the GPU, and is no longer relevant.
Let's create another drm_mode_config_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-7-maxime@cerno.tech
Prior to the BCM2711/RaspberryPi4, the GPU was a part of the display
components of the SoC. It was thus a part of the vc4 driver.
However, with the BCM2711, it got split out and thus the v3d driver was
created. The vc4 driver now only handles the display part.
We didn't properly split out the code when doing the BCM2711 support
though, and most of the code around buffer allocations is still
involved, even though it doesn't have the backing hardware anymore.
Let's start the split out by creating a new drm_driver that only reports
and uses what we support on the BCM2711. The ioctl were properly
filtered already, but we were still exposing a .gem_create_object hook,
as well as having an .open and .postclose hooks which are only relevant
on older generations.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-6-maxime@cerno.tech
The vc4_bo_dumb_create() both fixes up the allocation arguments to match
the hardware constraints and actually performs the allocation.
Since we're going to introduce a new function that uses a different
allocator, let's split the arguments fixup to a separate function we
will be able to reuse.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-5-maxime@cerno.tech
A new generation of controller has been introduced with the
BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over
time we've piled on a number of checks in most parts of the drivers.
All these checks are performed several times, and are not always
consistent. Let's create a single, global, variable to hold it and use
it everywhere.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
The vc4 planes are setup in hardware by creating a hardware descriptor
in a dedicated RAM. As part of the process to setup a plane in KMS, we
thus need to allocate some part of that dedicated RAM to store our
descriptor there.
The async update path will just reuse the descriptor already allocated
for that plane and will modify it directly in RAM to match whatever has
been asked for.
In order to do that, it will compare the descriptor for the old plane
state and the new plane state, will make sure they fit in the same size,
and check that only the position or buffer address have changed.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.
Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.
Fixes: 624b4b48d9 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org
commit 6de79dd3a9 ("drm/bridge: display-connector: add ddc-en gpio
support") added a consumer for this GPIO in the HDMI connector device.
This new consumer conflicts with the pre-existing GPIO consumer in the
sun8i HDMI controller driver, which prevents the driver from probing:
[ 4.983358] display-connector connector: GPIO lookup for consumer ddc-en
[ 4.983364] display-connector connector: using device tree for GPIO lookup
[ 4.983392] gpio-226 (ddc-en): gpiod_request: status -16
[ 4.983399] sun8i-dw-hdmi 6000000.hdmi: Couldn't get ddc-en gpio
[ 4.983618] sun4i-drm display-engine: failed to bind 6000000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi]): -16
[ 4.984082] sun4i-drm display-engine: Couldn't bind all pipelines components
[ 4.984171] sun4i-drm display-engine: adev bind failed: -16
[ 4.984179] sun8i-dw-hdmi: probe of 6000000.hdmi failed with error -16
Both drivers have the same behavior: they leave the GPIO active for the
life of the device. Let's take advantage of the new implementation, and
drop the now-obsolete code from the HDMI controller driver.
Fixes: 6de79dd3a9 ("drm/bridge: display-connector: add ddc-en gpio support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220614073100.11550-1-samuel@sholland.org
Previously the BO_PINNED state in the submit was tracking two related
but different things: (1) that the buffer object was pinned, and (2)
that the vma (mapping within a set of pagetables) was pinned. But with
fenced vma unpin (needed so that userspace couldn't race with retire
path for releasing a vma) these two were decoupled. The fact that the
BO_PINNED flag was already cleared meant that we leaked the bo pin count
which should have been dropped when the submit was retired.
So split this state into BO_OBJ_PINNED and BO_VMA_PINNED, so they can be
dropped independently.
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/487559/
Link: https://lore.kernel.org/r/20220527172341.2151005-1-robdclark@gmail.com
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents
with 1, so msm_iommu_pagetable_map maps only the first physical segment.
To fix this problem use for_each_sgtable_sg(), which uses orig_nents.
Fixes: b145c6e65e ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.
[How]
Use max_fall value instead of max_cll as a limit for brightness control.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
moved Exynos MIC attaching from DSI to MIC driver. However the method
proposed there is incomplete and cannot really work. To properly attach
it to the bridge chain, access to the respective encoder is needed. The
Exynos MIC driver always attaches to the encoder created by the Exynos
DSI driver, so grab it via available helpers for getting access to the
CRTC and encoders. This also requires to change the order of driver
component binding to let DSI to be bound before MIC.
Fixes: dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed merge conflict.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The of_drm_find_bridge() does not return error pointers, it returns
NULL on error.
Fixes: dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Fixes: eb8c88808c ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All other chips, from gfx6-gfx10, now include the MODE register at the
end of the wave debug state. This appears to have been missed in gfx11,
so this patch adds in MODE to the debug state for gfx11.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following commit 17e822f759 ("drm/msm: fix unbalanced
pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to
adreno_unbind() will disable runtime PM twice, as indicated by the call
trees below:
adreno_unbind()
-> pm_runtime_force_suspend()
-> pm_runtime_disable()
adreno_unbind()
-> gpu->funcs->destroy() [= aNxx_destroy()]
-> adreno_gpu_cleanup()
-> pm_runtime_disable()
Note that pm_runtime_force_suspend() is called right before
gpu->funcs->destroy() and both functions are called unconditionally.
With recent addition of the eDP AUX bus code, this problem manifests
itself when the eDP panel cannot be found yet and probing is deferred.
On the first probe attempt, we disable runtime PM twice as described
above. This then causes any later probe attempt to fail with
[drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13
preventing the driver from loading.
As there seem to be scenarios where the aNxx_destroy() functions are not
called from adreno_unbind(), simply removing pm_runtime_disable() from
inside adreno_unbind() does not seem to be the proper fix. This is what
commit 17e822f759 ("drm/msm: fix unbalanced pm_runtime_enable in
adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check
whether runtime PM is still enabled, and only disable it in that case.
Fixes: 17e822f759 ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20220606211305.189585-1-luzmaximilian@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
